
词语导航
基本信息
词语:齿环
繁体:齒環
拼音:chǐ huán
英语翻译
【化】 gear ring
相关词条
1.studring 2.ringgear 3.rim 4.toothedring分词翻译
齿的英语翻译:
tooth; tine【医】 dens; dent-; dentes; denti-; dento-; odont-; odonto-
环的英语翻译:
annulus; hem in; link; loop; ring; surround【计】 ring up; toroid
【化】 ring
【医】 annuli; anulus; band; circle; circulus; cycle; cyclo-; gyro-; loop; orb
ring; verge
翻译例句
1. 特种黄铜同步器齿环在应用中耐磨性差。
Special brass synchronizer tooth ring wear ability is poor in using.
2. 阐述了汽车同步器齿环粉末锻造的工艺过程。
The powder forging process of synchro—mesh rings for motor vehicles is described in this paper.
3. 建立了详细的行星齿环换向机构运动学分析模型;
The kinematic analysis model has set up for planetary gear-ring inverse mechanism.Www.wENTIyi.CoM
4. 行星齿环式无游梁抽油机是一种新型的无游梁抽油机。
The non-beam pumping unit of planetary gear-ring type is a kind of new non-beam pumping unit.
5. 当再次按钮点动滑齿柱转齿环和滑齿套因弹簧上升复位。
When the button is pointed again the slide tooth column, the rotating tooth ring and the slide tooth sleeve return because of spring.
6. 在独创性在于该齿环是相对于太阳的车轮流离失所者的事实。
The ingenuity lies in the fact that the ring gear is displaced in relation to the sun wheels.
7. 分析了这种新型减速器的工作原理及结构特点,导出了内齿环板的受力公式。
This paper analyzed the working principle and structural characteristics of this new typed reducer, and derived the force acceptance formula of inner-toothed ring plates.
8. 本文在先期研究的基础上对行星齿环式无游梁抽油机进行了更加深入的研究。
In this thesis, the author performed further study on the non-beam pumping unit of planetary gear-ring type based on the previous study.
9. 在飞轮的外缘(压)有一齿环,在发动起动时,齿与起动机的驱动小齿轮啮合。
The flywheel also has a large ring gear at its outer edge, which engages with a pinion gear on the starter motor during engine cranking.
10. 在此基础上,讨论了机构参数对齿环滑块的速度和加速度、系杆的角速度和角加速度的影响。
And based on this condition, there is a discussion on the effect to the slider"s velocity, acceleration, and rod"s angular velocity and angular acceleration caused by mechanism parameters.
11. 在分析行星轮与内齿环各段啮合情况的基础上,建立了行星齿环换向机构中齿环滑块的速度和加速度计算模型。
Based on the meshing analysis of planetary gear and inner gear-ring, the velocity and acceleration calculation model of the slider is established.
12. 在分析行星轮与内齿环各段啮合情况的基础上,建立了行星齿环换向机构中系杆的角速度和角加速度计算模型。
Based on the meshing analysis of planetary gear and inner gear-ring, the angular velocity and angular acceleration calculation model of the rod is established.
13. 通过对碎煤齿环的失效分析,找出了影响齿环寿命的因素及薄弱环节,并研制成功了最优成分的耐磨材料和堆焊工艺,显著提高了生产率和企业的经济效。
The wear-resistant material with best composition and overlay welding process were successfully developed, and the productiviting and the economic benefit were obviously improved.
14. 设计的新型三环减速器主要由圆弧齿同步齿形带、小带轮、大带轮、曲柄轴、传动环板、输出轴、外齿轮和箱体等组成。
Newly developed three ring gear reducer is comprised of synchronous belt, big and small pulleys, crankshaft, drive ring plate, output shaft, external gear and case.
15. 三环传动是我国科技人员发明的新型的少齿差行星传动装置。
Three-ring gear transmission is a novel type of planetary transmission with small tooth number difference, which was invented by a Chinese engineer.
16. 本文在分析和讨论了现有的外平动三环减速机结构的基础上,提出了一种新的内平动少齿差行星减速机的结构方案。
On the basis of analyzing and discussing the structural theory of Three-Ring gear reducer, this dissertation gave a new scheme of planetary gear reducer with few teeth difference.
17. 在螺旋锥齿轮硬齿面精加工这一环节上,我国与发达国家的差距尤为明显。
There is an obvious disparity between our nation and other developed nations in the field of hard surface finish machining of the spiral bevel gear.
18. 介绍了一种烧结矿冷却环冷机销齿驱动装置。
A pin rack driven device for sinter circulate cooler was presented in this paper.
19. 四环减速器是采用多齿对啮合、少齿差齿轮传动实现减速的新型减速装置。
The four-ring reducer is a kind of new typed retarding device with many mesh points, gearing with small difference between the numbers of teeth.
20. 介绍了单阶梯尖环齿钻头的结构特点及碎岩特点。
This paper introduces the "structure characteristics and rock fragment characteristics of single step drill head with point pick.
21. 三环式齿轮减速器是在普通少齿差行星减速器基础上开发的一种新型传动装置,应用前景广泛。
Three-ring reducer is a new transmission device which develops in the foundation of few tooth difference planet reducer, its application prospect is wide.
22. 建立了三环式少齿差传动的动力学方程,利用数值方法进行了实例计算和分析。
The dynamic equations of Three Ring Type Gear Reducer were established and a practical example is worked out by means of numeric method.
23. 三环式少齿差行星齿轮减速器是具有很多优点的一种新型少齿差传动。
The three ring typed planetary reducer with less teeth difference is a kind of new typed transmission of less teeth difference with many advantages.
24. 本文中的新型内三环减速器是在渐开线少齿差行星传动的基础上开发的一种新型传动装置。
The three-ring internal gear reducer(TRIGR) in this article is a new type transmission which have been developed on the basis of involute few teeth difference (FTD) planetary transmission.
25. 钢丝弹簧固定在多条环型隔离凹槽上,内四周有凹齿,与电源插头接触好。
Steel wire springs are fixed on a plurality of annular isolated concave grooves, and concave teeth are around the annular isolated concave grooves inside, and well contacted with the power plug.
26. 动力采用常用的皮带轮驱动,主要机构有机体、动齿盘、定齿盘、环筛、喂料斗等部分,用于谷物和油料的粉碎。
The use of commonly used power-driven pulley, the principal organs of an organism, moving teeth set teeth set disk, Central screen, feed hopper and other parts, and fuel used to crush grain.
27. 动力采用常用的皮带轮驱动,主要机构有机体、动齿盘、定齿盘、环筛、喂料斗等部分,用于谷物和油料的粉碎。
The use of commonly used power-driven pulley, the principal organs of an organism, moving teeth set teeth set disk, Central screen, feed hopper and other parts, and fuel used to crush grain.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
