
词语导航
基本信息
词语:加工脆性
繁体:加工脆性
拼音:jiā gōng cuì xìng
英语翻译
【化】 work brittleness
分词翻译
加工的英语翻译:
machining; process
【化】 processing
【医】 elaborate; elaboration
【经】 extra work; process; processing; transform
翻译例句
1. 用单刃金刚石车削试验研究超精密加工脆性晶体材料的机理。
This paper studies the ultra-precision machining mechanism of the brittle crystal materials by carrying out single diamond turning experiment.
2. 利用自制的实验设备研究电镀金刚石线锯的超声纵振动切割加工脆性材料。
The ultrasonic vibration cutting processing of electroplated diamond wire saw for hard and brittle materials was researched.
3. 采用电子背散射衍射(EBSD)技术和TEM技术对IF钢二次加工脆性与晶界结构之间的关系进行了研究。
The effect of grain boundary structure on secondary working embrittlement (SWE) of IF steels was studied by electron back-scatter diffraction (EBSD) and TEM.
4. 工程陶瓷因为具有极高的硬度、良好的耐磨耐蚀性和很高的脆性,使其成为难加工材料。
Engineering ceramic materials are difficult to machine because of their outstanding properties, such as high hardness, high wear resistance, high erosion resistance and high brittleness.
5. 但是其高温脆性大,加工成型困难,至今得不到工业应用。
But its brittleness at high temperature and hard to machine limited its applications so far.
6. 对单晶硅脆性材料的超精密磨削加工作了大量的实验研究。
In this paper, the experimental investigation is made on the grinding of single brittle materials.
7. 该钻头同样适用于其它硬脆性材料的加工。
The drill developed is suitable to the machining of other hard brittle materials.
8. 论述了脆性材料延性加工机理。
The mechanism of ductile machining for brittle material is described.WWW.WEntIyI.COm
9. 毫米波铁氧体移相器由于尺寸很小,铁氧体材料的脆性很大给加工和装配这种移相器带来很大困难。
It is difficult to manufacture and assemble MMW ferrite phase shifter for the small size and the frangibility of ferrite material.
10. 粗加工中,增加磨削分力比可以增大磨削应力场中的主应力极值,有助于材料的脆性去除。
To increase component of grinding force ratio can increase principal stress extreme values in grinding stress field. Materials can be removed by brittle fracture.
11. 但由于硬度高、脆性大、大多数陶瓷材料不导电,传统的机械加工方法难以加工,使用范围受到限制。
However, it is difficult to machine this material in conventional machining methods because of its high hardness and brittleness as well as inconductvity, thus restricting its application area.
12. 超声加工是目前加工玻璃、钻石、工程陶瓷等硬度高、脆性大材料的一种比较好的方法。
Today ultrasonic machining is a good method to machine hard and brittle material, such as glass, diamond, engineering ceramics.
13. 尽管如此,旋转超声加工仍然不能避免硬脆性材料加工中的边缘破损等常见问题。
RUM can not avoid the common problems of machining brittle and hard materials like edge-chipping.
14. 实验还表明研磨加工后,工件表面都产生塑性变形,即使是像陶瓷、硬质合金等硬脆性材料,其表面也存在一定的塑性变形。
And experiment indicate that, machined parts will occur plastic deformation after lapping, even surface of brittle materials such as ceramics and carbide will deform to a certain degree.
15. 金刚石砂轮磨削技术是硬脆性材料精密加工的有效方法。
Grinding technique using a diamond grinding wheel is an effective method for the precision machining of the hard and brittle materials.
16. 硬脆性无机材料的激光成形加工是激光加工技术最有前途的领域之一。
Laser shaping technology on hard and brickle inorganic materials is one of the most promising fields.
17. 因此,采用激光对微制造器件中脆性材料的弯曲加工不仅可以节省成本,还可以缩短制造周期实现绿色制造(无环境污染)。
As a result, laser bending in the micro-manufacturing of brittle material can not only save costs, but shorten the manufacturing cycle and achieve green manufacturing (no pollution).
18. 本实用新型属于金属材料的切削刀具领域,特别适合于脆性稀贵金属材料的小深孔套料加工。
The utility model belongs to the field of metal material cutting tools, especially fitting for boring processing of a small deep hole of brittle rare and precious metal material.
19. 硬质合金铰刀的高效性在机械加工中已得到广泛认同,但由于硬质合金材料本身的脆性,使其不适合用于断续切削。
Everybody knows the high efficiency of the carbide reamer, but the carbide blade is very brittle and not suit to interrupt cutting.
20. 利用超精密磨床磨削加工6种典型的光学玻璃,先从理论上研究了脆性材料脆塑转变的临界值。
In this paper, the typical 6 kinds of optical glasses have been grinding by the ultra-precision grinding, brittle-ductile transition"s critical depth of brittle materials is researched theoretically.
21. 其研究结果对加工玻璃、陶瓷等难加工的脆性材料具有一定的实际意义。
The research result is very useful to direct the cutting of 45 steel and the brittle materials that are very difficult to machine, such as glass and ceramics.
22. 产品为非脆性材质,韧性好,耐压强度高、平整度好、尺寸规整、机械加工性能优良且施工方便可任意剪切弯曲。
Products for non-brittle material, toughness, high strength, good flatness, size regular, machining performance and the construction can be cut to facilitate bending.
23. 适当地控制加工工艺参数,在低压下,微磨料水射流加工是一种用于脆性材料上微细通道的加工切实可行的方法,并可获得良好的加工表面质量。
With proper control of the operating parameters, this technology can be used for machining micro-channels on brittle materials with high quality of surface finish.
24. 合理地改善热加工时间和温度,可以减轻钢中残余铜元素所导致的热脆性。
Improving the time and temperature of hot-working process rationally, the hot brittleness caused by residual copper is lightened.
25. 合理地改善热加工时间和温度,可以减轻钢中残余铜元素所导致的热脆性。
Improving the time and temperature of hot-working process rationally, the hot brittleness caused by residual copper is lightened.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
