
词语导航
基本信息
词语:切削钻头
繁体:切削鉆頭
拼音:qiē xiāo zuān tóu
英语翻译
【机】 cut drill
分词翻译
切削的英语翻译:
cutting
钻头的英语翻译:
broach
【医】 bit
翻译例句
1. 将金刚石复合体加工成凿岩切削齿,应用于旋转钻头上,设计制造了新型旋转钻头产品。
A new type of rotary bits was manufactured by processing the PDC product into drilling cutting buttons and then embedding them into rotary bits.
2. 钻头通常属于刮刀型,装备有PDC或者天然金刚石切削齿,但取芯钻头的特别之处在于钻头中心有一孔。
The bit is usually a drag bit fitted with either PDC or natural diamond cutting structures, but the core bit is unusual in that it has a hole in its center.
3. 基于切削和振动理论,利用有限元技术对微细钻头振动钻入动力学特性进行了深入地研究。
Based on cutting and vibrating theories, the dynamic behavior of micro drill is studied by using the finite element method.
4. 集中论述了在实际微孔钻削加工过程中主切削刃对微钻头折断和微孔加工精度的影响。
This article focused on drilling in the actual processing of microporous main cutting edge of micro-drill breaks and microporous processing accuracy.
5. 为了改进PD C钻头设计,在全尺寸试验的基础上,对PD C钻头单齿切削过程进行了试验研究。
The single tooth cutting course of a PDC drilling bit is studied. The research is of great significance for improving PDC drilling bit design.
6. 模拟中考虑了钻头的切削齿和射流喷嘴对流场的影响。
The influence of bit cutting teeth and its jet nozzle on the flow field is taken into account in the simulation.
7. 在这种情况下,切削刀具即钻头快速转动,但工件却根本不动。
In this case, the cutting tool, thAT is, the drill, turns fast, but the workpiece doesn"t move AT all.
8. 螺杆钻具的高转速可以为PD C钻头提高切削速度提供井下动力保障。
High rotate speeds of dynamical drilling tools can improve PDC bit"s cutting rates, and also can provide downhole motives.
9. 针对山前构造的地层岩性特征,从复合片、刀翼形状、齿型、切削齿力平衡等方面设计和改进了PD C钻头。
Based on the formation lithology characteristics, the PDC bit was optimized from such aspects as the composite block, blade geometry, cutter model, and cutter mechanics balance, etc.
10. 将钻头前端未切削的工件材料部分定义为叠合层,指出叠合层的刚度分布情况是决定各个层间分层形状的关键因素。
Uncut layers in front of drill is called remaining layer, and its distribution of stiffness is the key factor to determine the delamination shapes of the interplies.
11. 金刚石钻头主要靠剪切、切削破岩、辅以压碎破岩。
Roller bits mainly break the rocks by knocking and crushing, aided with shearing.
12. 通过对钻头进行修磨,选择适当的切削参数,可以提高钻头的耐用度和工件的表面质量。
By means of drill grinding and selection of suitable cutting parameters, the serviceability of drill and surface quality of workpiece are improved.WWw.wenTiyi.CoM
13. 特点:FPC加工专用钻头,切削锋利,能有效抑制毛刺和钻污的产生。
Features: With sharp cutting teeth for preventing burr and smear generation. Suitable for machining FPC and PTFE.
14. 井壁模式分析说明,牙轮钻头的侧向切削过程不仅与齿面结构有关,而且与岩石性质、钻井参数有关。
Analysis of the side-wall pattern shows that the side-cutting process of the roller bit is related to not only the teeth surface design but also the rock property and the drilling parameters.
15. 在分析各国整体切削具不提钻可换式钻头结构及存在主要问题的基础上,提出采用整体旋转切削具可换式钻头。
Based on analyses about the structures and existing problems of integrally retractable alternative cutting element bits, a integrally rotary replacing cutting element bit was proposed.
16. 室内模拟试验表明(1)超高压喷嘴安装在钻头刀翼上能辅助PDC切削齿破岩;
Simulation test shows that, (1) fixing ultra-high pressure nozzle on the bit edge is helpful to penetration with PDC cutting teeth;
17. 探讨了获得钻削碳纤维复合材料高质量孔的两个关键因素:保持钻头切削刃的良好锋利性和采用高的钻削速度。
Two key factors for drilling high quality holes of carbon fibre reinforced plastics, which are to keep the fine sharpness of the cutting lip of the drill and to use high drilling speed are discussed.
18. 新型切削齿及高密度保径布齿提高钻头在硬研磨性地层中的使用寿命。
New type PDC cutters and heavyset gage design promote longer bit life in hard and abrasive formations.
19. PD C切削齿尺寸、后倾角和布齿密度是影响PD C钻头性能的重要设计参数。
PDC cutter size, back rake and density are very important design parameters affecting the performance of PDC bit.
20. 钻头切削齿与胎体的连接质量关系到钻头的使用寿命,因此有必要对切削齿与胎体的连接技术进行探讨。
It is necessary to study the connecting technique between the drill cutter and placenta, because the connecting quantity affects the working life of drill.
21. 井壁模式分析说明,牙轮钻头的侧向切削过程不仅与齿面结构有关,而且与岩石性质、钻井参数有关。
Analysis of the side-wall pattern shows that the side-cutting process of the roller bit is related to not only the teeth surface design but also the rock property and the...
22. 筒式钻头的切削具可分为截齿和牙轮,截齿筒状钻头用于风化软岩及永冻土地层钻进,牙轮筒式钻头用于硬质基岩钻进。
Hose bit can be divided into cutter teeth and cone teeth, cone teeth for weathering of soft rock strata, and permafrost, cutter teeth used for drilling hard bedrock.
23. 本文用平面光弹方法,对阶梯金刚石钻头切削刃下岩石的应力进行分析。
Rock cutting by a step ped bit has been studied with experimental stress analysis and is tested under atmospheric pressure.
24. PD C齿切削载荷的分析,以实验测试的数据为基本依据,对钻头布齿结构参数、切削齿特性参数、岩石的力学性质、钻头的工作参数等因素对PDC齿切削力的影响规律做了全面、系统的研究。
Based on the data, this study studies the cutting force affected by the characteristic parameter of PDC cutters, the mechanics property parameter of rocks, the working parameter of PDC bit.
25. 该模型包括了钻头以及钻削操作的重要特性,即钻头的截面几何特征、螺旋角、转速和钻削过程中产生的切削力。
The model includes of important characteristics of drill bit and drilling operation, i. e. sectional geometrical property of drill, spiral Angle, speed and cutting force created during drilling.
26. 以一种现场常用的PDC取心钻头为原型,充分考虑排屑槽和切削齿对于井底流动的影响,建立了与实际相接近的PDC取心钻头井底流场的物理模型。
The bottom hole flow physical model of a kind of PDC coring bits is established considering the effect of junk slot and teeth layout in this paper.
27. 以此为基础,提出一种通过测量主刃投影曲线间接测量主刃各点切削角度的新方法,较好地解决了任意刃形钻头切削角度的测量问题。
Then a new method is proposed to measure indirectly cutting angles of drills with arbitrary point geometry by measuring the curve of the main edge projected.
28. 还描述了研究钻头侧向切削的实验设备和一些试验结果。
The facilities for side cutting tests and some test results are introduced.
29. 还描述了研究钻头侧向切削的实验设备和一些试验结果。
The facilities for side cutting tests and some test results are introduced.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
