
词语导航
基本信息
词语:复合曲线
繁体:復合曲線
拼音:fù hé qū xiàn
英语翻译
【计】 complex curve【经】 complex curve
相关词条
1.combinedcurve分词翻译
复合的英语翻译:
complex; composite; compound【化】 recombination
【医】 combination; recombination
【经】 compound
曲线的英语翻译:
curve【医】 curve
【经】 curve
翻译例句
1. 当选择袋子的轮廓时,边界没有必要必须转换为复合曲线。
When selecting the profile for the pocket, the boundary does not have to be a composite.
2. 本文根据工程实例介绍了某个体育场施工中复合曲线上钻孔坐标的计算及测设方法。
Taking a stadium as an example, the paper introduces a method to calculate hole coordinates in complex curves.
3. 首先区分了氢源和氢阱的概念,然后通过氢源氢阱复合曲线和氢气剩余曲线在合成网络之前以图形的方式指出了最小氢气使用量。
Pinch technology is established on the concept of hydrogen sinks and hydrogen sources. Using the data of sinks and sources, hydrogen composite curves and hydrogen surplus curve are plotted.
4. 同时晶须取向也影响复合材料的热压缩应力-应变曲线的形状。
Meanwhile, the whisker orientation affects the shapes of the stress strain curves of the composites.wWW.WeNtiyi.Com
5. 在实际工程中,如何通过载荷试验曲线确定复合地基承载力存在着应用上的一定困难。
In actual work, it is rather difficult to apply the loading curve to determining the bearing capacity of the composite foundation.
6. 采用复合法制备型壳,在制备过程中,改变不同的环境湿度和温度而得到型壳的不同干燥时间曲线,确定工艺参数优化值。
Using mold prepared by compound method, on the basis of different drying time curve attained by changing environmental humidity and temperature, the optimized processing parameters were determined.
7. 自动门的门体一般无曲线运动和复合运动形式。
The door body of the automatic door has no curvilinear motion and complex motion.
8. 利用极化曲线测试法分析了不同碳材料和不同方法制备的铂碳复合电极的塔菲尔常数。
With the method of the polarization curves test, the Tafer constants of the platinum carbon composite electrodes made by different carbon materials and different preparation were tested.
9. 本文建立了复合材料疲劳寿命曲线的“有效缺陷模型”,阐明了模型中两个参数的物理意义。
The effective flaw model is developed to describe the S-N curves of composite materials. The two fitted parameters in the model have certain physical meaning.
10. 针对圆形封闭复合油藏,提出一种新的用于预测产量的标准曲线图版。
A new standard curve chart for projecting production has been proposed in accordance with circular confined complex reservoir.
11. 通过对频响曲线的对比分析,得出阻尼材料复合铝合金型材隔声的效果。
The effect of aluminum alloy materials on noise insulation with damping materials can be got.
12. 研究了热循环对铝基复合材料热膨胀和冷却收缩曲线的影响。
The effects of thermal circling on the curve of heat expansion and cold contraction are investigated.
13. 缝洞孔复合型具有双重孔隙介质的特点,压力恢复曲线具多台阶型。
The third type has double porosity system, and the build-up curve has a stepwise form.
14. 研讨复合型曲线视距横净距的计算,分析“规范”关于视距横净距计算方法的缺陷及局限性,提出通用计算法及其公式。
The paper analyses the drawback of the calculating method of lateral clear distance of the curves with fransitious provided by the specification and provides a common calculation method and formula.
15. 该理论不仅可以给出复合材料的初裂强度和极限强度,而且还能给出复合材料的应力-应变曲线。
Not only the strength at first crack and ultimate strength can be calculated, but the stress-strain curve of composite material can be established.
16. 本文测定了复合材料界而层—纵向拉伸性能关系曲线。
The relationship curve of the interface-longitudinal tensile property is determined.
17. 本文将色调再生曲线与多项式回归校正相结合,对扫描仪进行复合校正。
In this paper, scanner is calibrated with tone reproduction curve and polynomial regression.
18. 本发明提供了一种板带材轧制用变凸度工作辊,其辊形曲线采用复合函数。
The invention provides a variable convexity working roll for rolling plates, sheets and strips, and a roll shape curve thereof adopts a composite function.
19. 在此基础上,对复合材料的拉伸应力-应变曲线进行了考虑热残余应力的有限元预测。
Based on the analyzed results, the tensile stress-strain curves of the composites were predicted with or without the residual stresses considered.
20. 提出一种以特性值为优化目标构造复合型凸轮运动曲线的新方法。
A new method of constructing compound CAM moving curve is proposed by taking some characteristic values as an optimization object.
21. 提出了密肋复合墙体的抗侧刚度退化曲线和骨架曲线模型,并给出统一的表达式,为进一步的研究提供了基础。
The model of skeleton curve and the curve of stiffness degradation of the slab are presented, and the uniform expressions are given, which provides the foundation for successive study.
22. 实验数据表明:大编织角复合材料在单向拉伸作用下的破坏形式较为复杂,其应力-应变曲线呈现非线性特性。
The experiment results show that composites with large braiding Angle have complex crack forms under uniaxial tensile loading and the tensile stress-strain curves take on nonlinear characters.
23. 用非平衡态热力学涨落理论对纳米复合材料的固化作了理论预估,与实验固化曲线能很好地吻合。
The non-equilibrium thermodynamic fluctuation theory was used to predict the cure process of the nanocomposite and the theoretical prediction was in good agreement with the experimental cure curves.
24. 加入聚苯硫醚(PPS)的PTFE基复合材料的损耗因子曲线只出现一个明显的峰,峰值变大;
The loss factor curve of PTFE/PPS appears only one peak, and the loss peak value increases.
25. 研究了复合迭代函数方程所代表的一类不变曲线的解析解,通过构造辅助方程的幂级数解,从而获得原方程的解析解。
This paper is concerned with an analytic invariant curves on a planar mapping of the iterative functional equation.
26. 研究主要考虑短纤维长径比的变化对复合材料的应力传递、弹性模量以及应力应变关系曲线的影响。
The studies are focused on the stress transfer, elastic modulus and stress strain curve of the composite.
27. 对存在热残余应力时复合材料的应力—应变曲线进行了模拟;
The tensile stress -strain curves of composites were also simulated.
28. 优选将复合帘线的应力-应变曲线中的从低弹性区域特性到高弹性区域特性的拐点设定在变形的2~7%范围内。
The point of inflection from low elasticity region characteristics to high elasticity region characteristics in a stress-strain curve is preferably set in a range of 2 to 7 % of strain.
29. 优选将复合帘线的应力-应变曲线中的从低弹性区域特性到高弹性区域特性的拐点设定在变形的2~7%范围内。
The point of inflection from low elasticity region characteristics to high elasticity region characteristics in a stress-strain curve is preferably set in a range of 2 to 7 % of strain.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
