
词语导航
基本信息
词语:床身
繁体:床身
拼音:chuáng shēn
英语翻译
lathe bed
相关词条
1.body 2.bed 3.bedpiece 4.bodysection 5.column分词翻译
床的英语翻译:
bed; fleabag; kip【医】 bed; clino-; matrix
身的英语翻译:
body; life; one"s conduct; oneself翻译例句
1. 小孩睡羽绒床身体会变弱。
A feather bed enervates the body of a child.
2. 床身四周带有护栏,安全可靠。
The lathe bed all around has the guard rail, safe reliable.
3. 固定在鞍座上,并悬挂在床身的前面。
Fixes in the saddle place, and is hanging in lathe bed front.
4. 车床的床身是用铸铁做的。
The lathe bed is made of cast iron.
5. 改进后的车床床身具有良好的动态特性。
And the modified bed has a good dynamic performance.
6. 为进一步对床身进行优化设计提供了条件。
It provides the convenient condition for optimal design of the bed.
7. 利用有限元法分析床身变形,校验了机床刚度。
A flexible finite element stiffness model of lathe bed is presented and analysed.
8. 特别适用来制造机床底座、床身、支架等基础件件。
PC especially can be used in manufacturing the foundation , bed supporting bracket .
9. 卧式床身是基础构件,用来支承床头箱、尾座和拖板。
The horizontal bed is the foundation member which supports the headstock, tailstock, and carriage.
10. 本文主要论述运用模型试验来研究车床床身的合理结构。
The paper deals mainly with the study of rational structure of a lathe bed by model tests.
11. 龙门双驱结构,高阻尼床身,刚性好,速度和加速度高。
Gantry double driving structure, high damping bed, good rigidity, high speed and acceleration.
12. 通过试验检测和模态分析,对现有床身进行了实地测试。
The present body is tested with site trial and modal analysis by using excitation.
13. 床身和工作台材料均选用高强度优质铸铁,树脂砂造型。
The material of machine tool body and working table applies high-intensity excellent cast iron, and resin sand molding.
14. 本次设计的主要内容包括传动装置的设计、床身的设计等。
The design of the main contents include gear design, the design of bed.
15. 介绍加锑提高大型床身导轨硬度的试验情况和生产应用结果。
The tests of adding antimony to increase hardness of guide way of large beds was described and the results of its application in production was introduced.
16. 为了达到大的中间板上作用力,常采用双框架压力机床身结构。
In order to enlarge the force of middle beam, the double-frame press has been designed.
17. 车床的最大的零件称床身,车头和尾架被紧固在相反末端的床身。
The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends.
18. 为了减轻床身的重量和保证床身的刚度要求,设计了板壁孔结构。
To reduce the lathe-bed and assure its stiffness requirement, a batten wall pore structure is designed.
19. 尾架:安装在床身导轨上,并沿此导轨纵向移动,以调整其工作位置。
The tail frame: installed in bed, and guide rail along the guide rail, adjusting to the longitudinal mobile work position.
20. 本文简要介绍了一种钻削马鞍床身安装孔装置的设计原理、主要结构等。
The special drilling machine whose principle and construction were introduced was used to drill holes.
21. 车床的主要部件都装在具有导轨的床身上,刀架与尾架可沿着该导轨滑动。
All of the principal units of the lathe amounted on a bed having ways along which the carriage and tailstock travel.
22. 目前对普通车床床身的设计缺乏有效的理论依据,床身的结构设计不尽合理。
Now lathe bed lacks effective design of rational basis; structural design bed is not enough reasonable.
23. 分析了卧式车床床身导轨在水平和垂直平面上的误差对工件加工误差的影响。
The article analyses the effect of the error of horizontal lathe"s guiding rails on the horizontal level and vertical level on the processing error of the work-piece.wWw.weNTIyI.COM
24. 以XK717铣床床身为研究对象,比较了采用不同筋板型式床身的动态性能。
The dynamic performance of the bed is compared by using different arrangement patterns of strengthened bars on the XK717 milling machine.
25. 本文介绍了我们采用激光全息干涉计量方法在拉床床身结构刚度试验中的应用。
The measurement for the stiffness of broacher body structure by laser holographic interferometry is introduced in this paper.
26. 优化后,结构固有频率及刚度变化不大,而床身质量却大大下降,取得明显效果。
After these, the structural natural frequency changes a little, but the grinder bed mass reduces greatly, thus the obvious result is achieved.
27. 研制了MJ 7116人造花岗岩磨床床身,并与铸铁床身进行了动态性能对比。
Manufacture of AGC bed of grinding machine MJ7116 is reported, and its dynamical performance is compared with one from cast iron bed.
28. 通过改进普通车床主轴箱与床身接触面的刮削方法增加接触点,从而提高接触刚度。
Through alter the method on scraping contact surface between main spindle head and lathe frame, we may increase contact point and improve the contact rigidity.
29. 通过改进普通车床主轴箱与床身接触面的刮削方法增加接触点,从而提高接触刚度。
Through alter the method on scraping contact surface between main spindle head and lathe frame, we may increase contact point and improve the contact rigidity.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
