冲件用英语怎么说,冲件的英文翻译


词语导航

基本信息

词语:冲件

繁体:沖件

拼音:chōng jiàn

英语翻译

【电】 stamping

分词翻译

冲的英语翻译:

charge; clash; rinse; rush
【机】 buck

件的英语翻译:

a unit; letter

翻译例句

1. 制造:钢管轧制,五金冲件;压铸件加工。

Manufacturing: Steel Pipe rolling, jumping pieces of hardware; Die-casting pieces for processing.

2. 我公司拥有模具设计、模具加工、精密冲件等多元化相结合的产能配套。

My company has mould design, mould processing, precision stamping diversified combination of supporting capacity.

3. 分隔单元包括多个缓 冲件以及至少一个伸缩件,其适于沿至少一个方向伸缩。

The separation unit comprises a plurality of buffering elements and at least one extensible member which is suitable for extending along at least one direction.

4. 用铜、铝、钢等材料对该方法进行了实验验证,得到了剪切断面上100%光亮带的精冲件。

After proving experiments of such process by using various materials of copper, aluminum and steel sheets, on the section profile of the fine stamping 100% smooth zone has been obtained.

5. 通过该冲件特点的工艺分析,确定级进模排样方案过程和模具主要工作零件及模具总装结构设计。

Analyzing the craft features of a punching piece, ascertain the process and scheme of a progressive die blank layout, and the design of main die working parts and final assembly structures.

6. 通过该冲件特点的工艺分析,确定级进模排样方案过程和模具主要工作零件及模具总装结构设计。

According to the punching technology character of brackets, layout design and die structural design are carried out, as well as stamping and bending fixed distance fashion is applied.

7. 对大间隙冲裁与冲件断面质量、模具磨损的影响进行了分析,并提出了提高模具寿命的具体方法。

The influences of a large clearence are analyzed to stamping parts, quality of cross section and die wear. A detail measure to improve die life is also discussed in this paper.

8. 通过该冲件特点的工艺分析,确定级进模排样方案过程和模具主要工作零件及模具总装结构设计。

The layout design and die structure were introduced, and the key points in designing the major components and structure of service position were discussed.

9. 利用AUTOLISP的实体功能实现对任意形状冲裁件的图形数据的提取。

In this paper, AUTOLISP"s entity function is used for obtaining graphic data of stamping part of any shape.

10. 因为这台压机的冲压速度达到1,100rpm 如果用来冲铝件的话,可能会产生皱褶,所以要把速度降至700 rpm。

With press speeds of up to 1, 100 rpm, the aluminum going through the line would have been shredded, at best. So things had to slow down to about 700 rpm.

11. 在冲模CAD系统中,冲裁零件的图形输入是关键的一步。

In CAD system for blanking dies how to input drawings of stamping is an important problem.

12. 介绍了焊片零件拉伸、冲裁多工位级进模,分析了零件的冲压工艺性,并对模具结构进行了合理的设计。

It introduced drawing, punching progressive dies for solder pieces and analyzed the processing ability of the component for stamping and punching. The structure of the die was designed reasonably.

13. 本文论述了客车件冲裁模cad系统的研制与开发。

This thesis deals with the research and development of stamping die CAD system for carriage.

14. 如果试冲零件边缘线有误差,可反复采用这种方法优化修边线。

If the edge line of the stamped part still has dimensional problem, this method can be used repeatedly to optimize the trimming line.

15. 相信我,冲成重量训练的最后一件事是你想做的事情。

Trust me, rushing into weight training is the last thing you want to do.

16. 在了解聚氨酯橡胶冲裁的过程和聚氨酯橡胶冲裁的工艺性的基础上,必须掌握聚氨酯橡胶冲裁模具主要零件的设计要领。

On the base of understanding the blanking process of polyurethane rubber and its processing properties, the design gist of the blanking die of polyurethane rubber must be mastered.

17. 多边形顶点算法是冲裁件优化排样的一种新算法。

The algorithm to apex of polygon is a new one when layout stampings optimally.

18. 对实际生产中易于出现的冲裁件缺陷加以分析,并给出消除这些缺陷的方法。

This paper analyses the defects of punching parts usually occurred in practical production and gives solutions to remove these defects.

19. 提出了一种粒子群算法的低压电器冲裁件排样优化问题的求解方法。

A particle swarm optimization algorithm for low voltage apparatus blanking part layout optimization was presented.

20. 冲裁件的排样是一个NP问题,在工业界具有广泛的需求。

Blanking layout is a NP problem, and is widely needed in the industry.

21. 试验结果表明,某些汽车零件采用热轧深冲钢板生产是可行的。wWw.weNTIYI.coM

Experiments" results show that it is possible using RSCA to produce some automotive parts.

22. 论述了在薄板冲压件上,用变薄翻边冲制小螺纹底孔的工艺、冲模结构、设计与制作技术。

Discuss punching small thread fluted opening technology, die structure, die design and die manufacture technology on thin sheet.

23. 薄壁零件在冲制过程中要求匀速拉延成形。

Pressing thin wall components requires Constant velocity while the operation process.

24. 本文采用人机交互方式进行参数化图形输入和冲裁件基本信息输入以提高绘图效率和避免重复劳动。

Man-machine interactive method has been adopted to execute parameterization pattern input and the basic information input about the blanking part.

25. 以有限长、宽的整体板料上所能冲裁出最大样件个数为目标,给出单一冲裁件排样的数学模型及相应的优化算法。

Take aim at blanking the maximum number of single blanking sample on a certain length and width sheet metal, the mathematical model and algorithm of optimum layout are proposed.

26. 研究了钣金数控冲切加工中零件信息模型的建立、自动优化排样、冲切工艺处理和NC代码生成。

Study the set up of information module of parts in NC blanking process of sheet metal, auto optimized layout, blanking process handling and NC code generating.

27. 研究了钣金数控冲切加工中零件信息模型的建立、自动优化排样、冲切工艺处理和NC代码生成。

Study the set up of information module of parts in NC blanking process of sheet metal, auto optimized layout, blanking process handling and NC code generating.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!