压膜用英语怎么说,压膜的英文翻译


词语导航

基本信息

词语:压膜

繁体:壓膜

拼音:yā mó

英语翻译

【化】 pressed film

分词翻译

压的英语翻译:

intimidate; keep under control; press; push down; shelve; suppress
【医】 prelum; pressure

膜的英语翻译:

film; membrane; theca; velamen; velum
【化】 membrane
【医】 coat; envelope; film; lemma; membranae membranae; membranae membrane
panniculus; theca; thecae; tunic; tunica; velamen; velamenta
velamentum

翻译例句

1. 照片镶在压膜卡片上。wWW.WentIYi.COM

The photographs were mounted on laminated cards.

2. 为了防止伤害在集尘装置上的卸压膜。

Pressure relief membrane to prevent damage to a confined dust collection device.

3. 推导出了一个适用于槽板结构压膜空气阻尼的微分方程。

A differential equation for calculating squeeze-film air damping in slotted plates is developed by modifying the Reynolds equation.

4. 本实用新型公开了一种转鼓式压膜污泥干燥机,属于环保设备技术领域。

The utility model discloses a rotary drum type squeeze-film sludge drying machine, which belongs to the technical field of environment-friendly equipment.

5. 目的观察Hawley保持器与透明压膜保持器的临床应用效果及特点。

Objective To investigate the effect and characteristics of Hawley retainer and transparent full-arch wraparound retainer in clinic application.

6. 本实用新型的目的为压膜机提供结构简单、同步性好的贴膜输送的同步装置。

The utility model aims to provide a synchronous device in sticking film conveying for the laminator, which has the advantages of simple structure and good synchronicity.

7. 容量最大的造模法,通过高压的作用材料从外部加热室通过铸口、流道或浇口进入闭式压膜室。

The highest volume molding method, in which the material is forced from an external heated chamber through a sprue, runner or gate into a cavity of a closed mold by means of high pressure.

8. 玻璃纤维织物:焚化炉,钢铁工厂;高抗热性,集尘效率高,低压降,使用寿命长(压膜处理)。

Woven glass: incinerators, steels and iron plants, high heat resistance, dust collection efficiency, low pressure drop, long life time (membrane laminated treatment).

9. 简化了通常测定过程中的压膜、烘干、重新溶解等步骤,明显缩短了测定的时间,更能适合于现场分析。

Because the universal processes of film preparing, washing, drying and re-dissolvingwere simplified, the analysis time was reduced substantially.

10. 对应用于非开挖纺织翻衬修复技术中的管状纺织复合材料的织造工艺、压膜工艺与浸树脂工艺进行了研究探讨。

The paper studied the weaving process, molding technique and resin treatment of the tubular fabric composite material for repairing the textile lining of a tube under non-digging out conditions.

11. 基于微缝隙气流的粘度修正模型,分析了气体对微圆盘的压膜阻尼效应,得到微圆盘表面的压强分布、压膜阻尼力和压膜阻尼系数的解析解。

Based on a viscosity amendment model of gas flow in micro-gap, squeezs gas film damping effect on micro plates is investigated.

12. 运用此CAD软件设计出的多面形体的银器与首饰,由不同技术处理实现,其中包括CNC计算机数控制作、压膜、冲压成型效果、快速仿型技术以及浇注制模技术。

The faceted silverware and jewellery is designed using CAD and realised using processes such as Computer Numerical Control (CNC) milling and press forming and rapid prototyping and casting.

13. 利用压阻效应、大(小)挠度理论、膜的应力形变等力学、电学知识设计了一种压阻式微压力传感器。

Based on the piezoresistive effect, large or small deflection theory, thin film"s stress theory and other mechanics or electricity knowledge, a piezoresistive micro pressure sensor is designed.

14. 结论:后方致压时,颈脊膜脊髓所受压力与致压深度及颈脊柱运动有着密切联系。

Conclusion: the stress on the CCMC has great relationship with the depth of canal occlusion and the movement position of cervical spine.

15. 钠离子浓度和血管内渗透压以及组织间隙渗透压通过血管膜保持平衡。

Sodium concentration and osmolality in the intravascular and interstitial Spaces equilibrate across the vascular membrane.

16. 平衡时,膜两侧压力差等于渗透压。

Balance when the pressure difference is equal to the osmotic pressure.

17. 研究了中空纤维膜组件在反冲操作时膜管内压降规律,考察了膜渗透系数、膜长度及膜内径对膜内压力分布及透量因子的影响。

The pressure distribution in hollow fiber membrane model is given and the effects of membrane permeability, length and diameter on pressure distribution and flux factor of the model are studied.

18. 通过负压对膜面施加张力来形成气承结构。

The air bearing structure is formed by applying pressure to the film surface by negative pressure.

19. 膜体防渗灌浆是通过在结构内侧的钻孔将灌浆材料压入结构外侧形成防渗膜体的方法。

The grouting material is forced into construction through the holes of its inside and impervious membrane formed in its outside.

20. 背压率大于80%,能排不凝结气体,膜盒坚固,使用寿命长,维修方便,使用范围很广。

Back pressure higher than 80%, to row non-condensing gas, diaphragm solid, long life, easy maintenance, using a wide range.

21. 并针对硅微压传感元件研制中存在的问题,提出采用化学腐蚀技术,选择性腐蚀工艺控制膜厚。

In view oi the problems existing in the silicon micro pressure sensors, this paper proposes the chemical etching techniques and the selective etching processes to control diaphragm thickness.

22. 多通道内压式中空纤维膜,洁净水处理的最佳选择。

Multipass Internal Pressure Type Hollow Fiber Membrane is the best choice for purifying water.

23. 受侧向荷载作用的金属膜常被用作压力装置的超压防护或实现某些特定的开关操作。

Metallic membranes under lateral pressure are widely used to protect equipments from the danger of overpressure or to accomplish some particular switch operation.

24. 受侧向荷载作用的金属膜常被用作压力装置的超压防护或实现某些特定的开关操作。

Metallic membranes under lateral pressure are widely used to protect equipments from the danger of overpressure or to accomplish some particular switch operation.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!