尺寸精度用英语怎么说,尺寸精度的英文翻译


词语导航

基本信息

词语:尺寸精度

繁体:尺寸精度

拼音:chǐ cùn jīng dù

英语翻译

【机】 dimensional accuracy

相关词条

1.dimensionalaccuracy  2.accuracytosize  

分词翻译

尺寸的英语翻译:

dimension; measure; measurement; size
【化】 dimension
【医】 dimension

精度的英语翻译:

precision
【计】 precision
【化】 accuracy

翻译例句

1. 零件的尺寸精度是非常复杂的非线性问题。

The dimension accuracy of parts is very complicated nonlinear problem.

2. 对刀误差对零件的尺寸精度和形状精度会产生影响。

Tool setting error will affect the size precision and the shape precision of workpiece.

3. 例如钻头的几何形状及尺寸精度是以精密投影机检验。

A projector is applied to inspect the drill geometry and dimensional accuracy.

4. 精密成形时弹性变形是影响锻件尺寸精度的重要因素。

Elastic deflection is an important factor to influence the accuracy of the formed component in precision forming.

5. 保证了印前设计尺寸与印刷、印后加工版尺寸精度的一致性。

And this ensures the consistency of the precision of pre-printing designed sizes with that of the post-printing processed version.

6. 在消失模铸造过程中,模样尺寸变化直接影响铸件的尺寸精度。

The changes of pattern size directly affect the dimensional accuracy of casting in the EPC process.

7. 结果表明,扩径率是影响制品横断面尺寸精度的一个主要因素。

Based on the results, expanding-ratio is important to dimensional precision of finished products.

8. 棒材热连轧生产过程中,影响产品最终尺寸精度和性能的因素较多。

In multi pass hot bar rolling, there are many complicated influences which may affect the final dimensional precision and mechanical properties.

9. 轿车转向节是轿车上的关键零件,对尺寸精度和产品质量要求很高。

A steering knuckle is the key component in cars, which needs high requirements in dimensional accuracy and product quality.

10. 同时还得到了电解参数对工件尺寸精度和表面粗糙度值的影响规律。

Meanwhile, it finds out electroanalysis parameters influencing workpiece size precision and surface roughness.

11. 液压缸内表面要求较高的尺寸精度、状精度以及适宜的表面粗糙度。

The internal surface processing of hydraulic cylinder requires high accuracy of size, shape, and good deformed surface finish.

12. 采用特种砂v法铸造工艺获得了良好表面精度和尺寸精度的铸造模具。

The fine surface quality and dimensional accuracy cast hot work die was obtained by special sand V method casting technique.

13. 机件的尺寸精度和几何精度是保证机件功能要求及互换性的关键因素。

Accurate dimension and geometry of a machine part are key factors ensuring its desirable functions and interchangeability.

14. 综述了金属注射成形产品尺寸精度的影响因素及控制尺寸精度的进展。

This paper analyzes factors influencing dimension tolerance of MIM products and the progresses in dimension control.

15. 结果表明,模型计算得到的尺寸误差较小,能够满足尺寸精度的要求。

It turned out that dimension error calculated by grid mapping model is smaller than required precision.

16. 该陶瓷型用于制作金属工艺品,尺寸精度和表面粗糙度均达到技术要求。

Both dimensional accuracy and surface roughness of the metal handicraft in ceramic mold meet technological requirement.

17. 在复制法激光打孔中,激光束的横向模式决定着加工孔的形状和尺寸精度。

In the process of duplicate laser boring, the crosswise pattern of laser beam determines the precision of the processing hole"s shape and size.

18. 工作台进给的平稳性会影响孔壁的表面粗糙度,严重时会影响孔的尺寸精度。

The stability of the worktable will affect the surface roughness of the hole wall, which will affect the hole size precision seriously.

19. 成形的机械构件具有精确的外形、高的尺寸精度和形位精度、好的表面粗糙度。

The mechanical component after forming has the accurate appearance, high accuracy of size and form, and the good rough degree in surface.

20. 边部加热对于均化热轧带钢横向温度分布、提高产品性能及尺寸精度具有重要影响。

Edge heating process can uniform the temperature of hot rolled stip and then benefit the property and dimension precision of the strip.

21. 批量生产中,操作者的劳动强度增大,生产效率较低,而且孔的深度尺寸精度也不高。

It accretes the labor intensity of the operator and reduces the production efficiency in lot production, and the depth-dimensional accuracy is not high.

22. 阐述了烧结体密度分布与精整尺寸精度的关系,材料抗拉强度与精整尺寸精度的关系;

The Present article has described the dependence of sizing dimension accuracy on the density distribution of sintered compacts and the tensile strength of materials.

23. 一般而言,磨削被认为是一种通常用于获得高尺寸精度和较好表面光洁度的精加工作业。

Generally, grinding is considered to be a finishing process that is usually used for obtaining high-dimensional accuracy and better surface finish.

24. 结果表明,所选用的材料和工艺可行,雷达罩的整体性能和尺寸精度均满足性能指标要求。

The result shows that the selected materials and process are feasible and both the gross property and the size accuracy meet the requirement of performance specification.

25. 轿车上的直齿圆锥齿轮尺寸精度与产品质量要求很高,难以采用常规的塑性加工技术成形。

Straight bevel gears used in car differential have strict requirements for dimensional precision and quality, it is difficult to form accurately them by the traditional forging techniques.

26. 对于非椭圆截面曲臂的大型曲轴,其模具结构设计对曲轴成形后的形状尺寸精度影响极大。

The design of die structure has much influence on shape dimension and precision of the formed crank-arm with a non elliptical section.

27. 卧式铣床支架的支承轴承的精度会影响刀杆的回转精度,从而影响孔的尺寸精度和圆柱度。

The precision of the support bearing of the horizontal milling machine bracket affects the rotation precision of the cutter rod, thus affecting the dimension precision and cylindricity of the hole.www.WeNtIYI.CoM

28. 随棒材轧制尺寸精度和性能预报准确程度的大幅度提高,对棒材的精确计数要求也越来越高。

Improvement of precision of bar steel rolling size and performance forecast requires the bar steel precise counting.

29. 电火花加工工件的尺寸精度受过切量影响,而过切量的大小主要取决于放电间隙和电机损耗。

The dimensional accuracy of electrical discharge machining(EDM) is greatly influenced by the overcut resulting from the discharge gap and electrode wear.

30. 电火花加工工件的尺寸精度受过切量影响,而过切量的大小主要取决于放电间隙和电机损耗。

The dimensional accuracy of electrical discharge machining(EDM) is greatly influenced by the overcut resulting from the discharge gap and electrode wear.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!