壳体板用英语怎么说,壳体板的英文翻译


词语导航

基本信息

词语:壳体板

繁体:殼體板

拼音:ké tǐ bǎn

英语翻译

【化】 shell plates

分词翻译

壳体的英语翻译:

【计】 body case
【化】 body; case; shell

板的英语翻译:www.wEnTIyi.com

bat; board; plank
【计】 board
【医】 assula; bar; board; disc; disci; discus; disk; lamella; lamellae
lamina; laminae; plasue; plate; table; tabula; tile

翻译例句

1. 反应堆压力容器包括顶盖、加肋管板,壳体(外壳和底部壳体)三部分。

The pressurized vessel of a nuclear reactor consists of three parts: the top cap, the ribbed tube-plate and the shells (the external shell and the bottom shell).

2. 发动机机匣上安装凸台结构,可简化为机匣壳体开孔后用围壁和加强板组合补强的力学模型。

On engine cases, installation base can be simplified by a mechanics model, which is case shell with hole and a complex of enclosing wall and reinforcing plate for increase strength.

3. 整个传感器由壳体、涡流线圈及信号处理板组成。

The sensors are composed of body case, coil card and signal processing board.

4. 全铝壳体、铸铁中联板,实现产品轻量化、大扭矩、低噪声的完美统一。

All aluminum alloys case, cast iron intermediate plate, so perfectly realize the lightweight, big torque and low noise of the products.

5. 导向板被固定到第一壳体的正面。

The guide plate is fixed to a face of the first housing.

6. 通过设置不同部分壳体单元的不同厚度,巧妙地处理了车体钢骨架与车体侧墙板及其他各种板件的焊接关系。

We set the thickness of the shell elements of the welding parts of the steel structure of the car body and its sheathings, such as side wall sheathing, as the sum of their thickness.

7. 当壳体与板束温差较大时,笔者通过对产品开发的生产实践,提出解决板壳式换热器要否设置膨胀节的类似判定方法。

Through the practice of developing the products, some experience is available which can be used to determine in which case the expansion joint is necessary in plate-shell exchangers.

8. 在靠近上轴的壳体上固定有由二个轴座,短轴及固定在短轴上的铲土板组成的铲土装置。

An earth shovel device composed of two shaft seats, a short shaft and an earth shovel plate fixed on the short shaft is fixed on a housing close to the upper shaft.

9. 同时,实验研究获得的钨合金壳体危险截面处应变—时间历程曲线,既可以为壳体设计提供理论支撑,又为钨合金壳体侵彻混凝土靶板的侵彻模型和数值仿真建立了验证标准。

The strain history achieved may provide a base in shell design and verify theoretical models and numerical simulations of tungsten alloy shell impacting and penetrating normally into concrete targets.

10. 本文介绍了超细长比的大型列管式固定管板换热器管系构架组装,穿管和管系与壳体组装工艺。

The report introduces fabricating and assembling process of fixed tube sheets type heat exchanger including tube bundle and shell, tubes passing through tube-sheets , etc.

11. 本实用新型公开了一种改进型模块化功率单元,它主要由壳体、散热器、大功率器件和控制电路板组成。

The utility model discloses an improved modular power unit, which mainly comprises a shell, a heat radiator, a large power device and a control circuit board.

12. 本发明的便携式存储装置包括一壳体、一电路板、第一连接接口与第二连接接口。

The inventive portable storage device comprises a shell body, a circuit board, a first interface and a second interface.

13. 探讨了低温管壳式换热器的管子与管板、管板与壳体的连接方式及焊接工艺。

Abstruct: The connection mode and welding technological process between tube and tube sheet, tube sheet and shell of low temperature tubular heat exchanger are discussed.

14. 本实用新型包括壳体、刀头座、电切按钮开关、电凝按钮开关和电路板。

The utility model comprises a casing body, a knife head seat, an electric cutting button switch, an electric coagulation button switch, and a circuit plate.

15. 采用防水防腐技术对磁钢、磁感应器件及印刷线路板进行封闭处理,壳体采用彩色镀锌处理工艺。

The magnetic steel, the magnetic sensor and the printed circuit board are sealed by a waterproof and anticorrosive technique, and a housing is processed by a color zinc-plating technique.

16. 一种波纹板式锅炉除尘器,它是由壳体、波纹板组、雨淋水管和挡水板等组成。

The dust remover consists of casing, corrugated plates, showering pipes and water baffle.

17. 在壳体的内腔设有隔水板及由隔水板与壳体构成的密封腔。

The inner cavity of the casing body is provided with a water stop plate and a seal cavity formed from the water stop plate and the casing body.

18. 在壳体的内腔设有隔水板及由隔水板与壳体构成的密封腔。

The inner cavity of the casing body is provided with a water stop plate and a seal cavity formed from the water stop plate and the casing body.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!