铰链杆用英语怎么说,铰链杆的英文翻译


词语导航

基本信息

词语:铰链杆

繁体:鉸鏈桿

拼音:jiǎo liàn gān

英语翻译

【化】 hinged lever

分词翻译

铰链的英语翻译:

hinge
【化】 hinge
【医】 hinge

杆的英语翻译:

mast; perch; pole; post; shank; staff
【化】 bar
【医】 culm; lever; rhadbo-; rod; stab; staff; stick

翻译例句

1. 所建立的系统模型反映了系统动态特性参数与铰链弹性五杆机构结构参数、电机电磁参数之间的关系。

The relation between the dynamic characteristics and the system parameters such as material parameters, electromagnetism parameters, structure parameters, is derived in the dynamic equation.

2. 针对刚体导引四位置铰链四杆机构综合问题,进行了可视化的程序开发与设计。

A visual program for synthesis problems of rigid body guidance flat four-bar mechanism with four-position is developed.

3. 产品广泛应用于丝织机械、关节轴承、轿车门铰链、汽车操纵杆等。

The product is widely applied to textile machine, joint bearing, door hinges and joystick of automobile, etc.

4. 提出了一种新型的双平行四连杆柔性铰链弹性导向结构,用作石英力传感器的力导向元件。

This paper introduces a new type of elastic guiding mechanism developed for quartz force sensor It consists of parallel quad crank arms connected by flexible hinges.

5. 四连杆铰链气弹簧助力式开启机构是目前高档汽车特别是轿车上经常采用的一种结构。

Air spring booster type four bar linkage opening mechanism is a currently used common structure on high class automobile, especially on car.

6. 这种方法对其它平面铰链四杆机构和平面六杆机构也是适用的。

The method is useful also for general planar four-bar linkage or six-bar linkage.

7. 五金配件:挂衣杆,领带架,西裤架,铰链,导轨,拉手。

Hardware:clothes pole, tie rack, trousers rack, hinge, slide rail, handle(Chinese ones)

8. 对平面二自由度五杆机构的位姿形式及位置逆解进行分析之后,提出了用二自由度辅助机构进行全铰链五杆轨迹机构综合的方法。

A method that USES two degrees of freedom (DOF) auxiliary mechanisms to path synthesize a five-bar mechanism was presented after analyzing the posts and inverted solutions of the five-bar mechanism.

9. 用几何法证明了等视角定理和低副运动可逆性在铰链四杆机构设计中的等价性,以求揭示它们之间的本质联系。

The equivalence between theorem of equal angle of view and reversible property of low pair, applied in synthesis of plane four-bar linkage, is demonstrated to reveal essence of their relation.

10. 介绍了任意铰链四杆机构运动识别及利用鼠标事件实现其任意点连杆曲线的方法。

A method of movement identification about random type of revolute four-bar mechanism and method of realization of random point coupler curve by mouse-event was introduced.

11. 重型自卸汽车设计中经常选用三角臂组合式倾卸机构,应用的是铰链四连杆机械运动工作原理。

The moving theory of four bar linkage is often used to analyze the triangular arm unloading mechanism of dump truck.

12. 提出了遗传惩罚复合优化方法GPCM,并应用于平面铰链四杆机构设计。

A optimization algorithm called as genetic and punishable complex method GPCM is approached, and applied to design of the plane four-bar linkage mechanism.

13. 此法在铰链四杆机构的一般位置进行研究,较传统方法更具说服力,并且更简便。

The method is studied in the general position of the mechanism, and is more convincing, more simple and convenient in use than the traditional methods.

14. 讨论了能够产生对称连杆曲线的铰链四杆机构的几何特征。

In this paper the geometry properties of the plane four-bar linkage which can generate a symmetric path are discussed.

15. 引入了铰链五杆机构的概念。

This paper introduces the concept of mechanism of five-bar.

16. 根据对用于镗孔加工刀具补偿的微位移技术的分析以及对柔性铰链机构的研究,研发了一套具有自主知识产权的平行四边形弹性镗杆结构的镗孔刀具微量补偿装置。

Based on the research on micro movement and elastic gemels, a boring cutter micro compensation device amounted on the parallelogram elastic boring rod is developed with self owned intelligence right.

17. 螺母两侧的连接杆一端与滑动机架上的销轴连接,另一端与螺母铰链。

One end of a connecting rod on both sides of the screw nut is connected with the pin of a sliding chassis, and the other end is hinged with the screw nut.

18. 采用拆运动链法分析平面铰链五杆机构存在曲柄的条件,指出完全曲柄和准曲柄的区别,并分别给出它们存在的杆长条件。wWW.WenTIYi.COm

By using the displacement equation and its singularity condition, the workspace boundary and its change rule of the plane five-bar linkage was analyzes.

19. 根据以机构极端位置建模导出的曲柄存在条件,应用机架变换法导出了两自由度铰链五杆机构(不论连架杆是否为主动件)的全部类型。

According to the condition of crank existence, all types of 5-bar linkage with 2-degree of freedom are synthesized by linkage mould in extreme position.

20. 用函数逼近法综合铰链四杆机构,使其近似实现给定的连杆曲线。

This article introduces the way of approaching function to synthesize the 4-combined-pole-installation, in order to approximately achieve the given curve lines.

21. 这些起重机,液压冲力并不是作用于吊杆上,而是作用于一个铰链连接杆。

On these cranes, the hydraulic RAMS that extend to raise up the crane do not push on the boom, but instead on a pivoting link-bar.

22. 对平面六杆瓦特型机构中间杆固定铰链中心位置的调节进行了分类,并给出了约束方程。

The adjustment of pivot position of the middle link in planar 6-link Watt-type linkage is classified. The corresponding constraint equations of each mechanism are presented.

23. 对平面六杆瓦特型机构中间杆固定铰链中心位置的调节进行了分类,并给出了约束方程。

The adjustment of pivot position of the middle link in planar 6-link Watt-type linkage is classified. The corresponding constraint equations of each mechanism are presented.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!