零检验用英语怎么说,零检验的英文翻译


词语导航

基本信息

词语:零检验

繁体:零檢驗

拼音:líng jiǎn yàn

英语翻译

【计】 null check

分词翻译

零的英语翻译:

zero; nought; fractional; nil; nothing; wither and fall
【计】 Z; zero
【医】 zero

检验的英语翻译:

check up; examine; inspect; proof; prove
【计】 CH; checkout; V; verify; verify check; verifying
【化】 checking; examine
【医】 analysis; coroner"s inquest; docimasia
【经】 inspection; monitoring; proof; test; verification; verify

翻译例句

1. 零检验是检验计算是否正确的方法。

Zero proof is a procedure of checking computations.

2. 一个西班牙衣服零售店,在国家检验机构发现其产品未能通过关之后,被曝光有质量问题。

Zara, a Spanish clothing retailer, was exposed as having quality problems, after the state inspection authority found out that its products failed to pass the quality threshold.

3. 检验计划有助于确定更换零件的时间。

Inspection programs help to determine when to replace parts.

4. 你们应将所提供的零部件运到我们的仓厍,所提供的装配工具需在我们这儿重新检验,以确保其符合标准。

You shall deliver the supplied parts and components to our warehouse, and the supplied assembly tools shall be reinspected at this end to ensure that they correspond to standards.

5. 按任务要求完成智能视觉系统的流程编辑,实现工件流水线上的零件的缺陷检验和工件形状种类的识别。

Finalize the process editing of machine vision system according to the task requirements, realize defect inspection and identification of machinery parts.

6. 零部件成品检验及整车检验。组织检验员按检验标准对成品及整车进行检验;

Finished products inspection, assign the inspectors to test the finished products and trailers based on the inspection standards and methods.

7. 硝酸酒精腐蚀检验:通过使用一系列的酸性或中性溶液检查磨削后零部件表面是否有裂痕或磨削烧伤。

NITAL ETCH : Process of checking surfaces of ground product for cracks or burns by use of a series of acids and neutralizers.

8. 为检验算法的抗干扰能力,在试验图像上叠加了零均值的伪随机噪声。提出了实施这些算法方面的一些考虑。

To examine noise immunity of algorithms, pseudorandom noise mean of which is zero is added to the test image" Some considerations the for implementing these algorithms are presented.

9. 最新的文献表明这个提出的修正似然比检验统计量在零假设下的渐近分布是比较简单,并且是容易应用的。

It is shown that the asymptotic null distribution of the modified likelihood ratio test proposed is derived and found to be relatively simple and easily applied.

10. 本研究以大卖场为刺激物,采用改进的消费者民族中心主义倾向量表,检验在零售店选择上的中国消费者民族中心主义倾向。

This research USES an improved consumer ethnocentrism scale to test the tendency of Chinese consumer ethnocentrism in the choice of hypermarket.

11. 通过对该烟度仪进行静态零漂试验和发动机校验试验,以此来检验该仪器的各项性能。

Steady excursion experiment and engine verified experiment were done in order to test the performance of this instrument.

12. 不少兵器在设计和生产定型时都需要进行成套的尺寸链计算,以便对零件的可装配性进行检验,保证系统的精度要求。

Many arms demand dimensional chain calculation in process of design and finalize the design in order to test the assembly characters of the parts and assure the system precision requirement.WWw.wEnTIyI.coM

13. 开发了加工轨迹预览功能,能检验零件加工程序的正确性。

Exactness of machining program can be checked with the function of preview machining contrail.

14. 尺寸标注是绘制零件工作图的一项重要内容,零件图中的尺寸是加工和检验零件的重要依据。

Dimensions mark is an important part of drawing spares mapping, and dimensions of spares mapping is the ruler of machining and checking spares.

15. 按照等速采样的瞬时压力零点平衡法,结合现场应用实践,检验了采样装置的密封和传动机构性能。

The sealing and drive mechanism performance of the sampling device are examined in accordance with the transient pressure zero balance method and in combination with the field practice.

16. 质检员负责抽样检查、分类、测试、称重、测量和检验原材料、零件、成品并跟进售后服务。

Inspectors sample, sort, test, weigh, measure and inspect raw materials, manufactured components or completed products or service delivery processes.

17. 承包人应进行检验,并稽查建设工厂所需的一切设备,机械和材料,其中包括各种备用零部件。

The Contractor shall perform the inspection and examination of all equipment, machining and materials including spare parts required for the construction of the plant.

18. 零部件外观检验的结果如何?

How about the components for visual check?

19. 所谓“零基线”检验,就是将两台GPS接收机通过“功率分配器”连接到同一副gps接收机天线上,并进行差分定位测量。

"Zero-baseline Test" refers to the experiment that links two GPS receivers with the same antenna element through a "Power distributor" and conduct the difference positioning.

20. 按照公司的图纸、检验指导书等完成零件检验工作,确保检验的零件质量合格。完成检验记录。

Implement incoming inspection according to the component drawing, inspection instructions, etc. and ensure the inspected components are qualified. Finish inspection record.

21. 分析了参数的显著性检验中由于零假设的不同选择所出现的问题,探讨了零假设的选择原则。

This paper analyzes the problem appearing in the parameter significance testing based on different choice of null hypothesis and discusses the choice principles of null hypothesis.

22. 检验产品达到零售商规范说明。

Verify that products meet retailer specifications.

23. 负责零部件检验记录的收集、汇总和保管,并定期对零部件质量状况进行分析,提出改进建议;完成部门安排的其他工作。

Collect and keep the relevant records during inspection, analysis the quality status periodically and recommend improvements; execute other works assigned by department.

24. 该方法可以在对移相器零点校正同时进行移相器相序检验,方法简单,具有实用价值。

This method can test phase sequence of phase switcher while rectifying the zero point of phase switcher. This method is simple and value in practice.

25. 通过总装的虚拟化样机设计,检验了零部件的结构设计中是否存在干涉,零件间的定位和装配关系是否合理,总体结构是否美观。

After the virtual reassemble, the part is intervene whether or not, the position and reassembled relation is reasonable or not and the overall structure is looked beautiful or not.

26. 熟悉ISO质量体系,会看模具图纸检验,熟悉零部件标准,能操作2.5D投影仪,三次元,和各种量具;具有良好的沟通协调能力。

Familiar with ISO quality system and tooling standard components, able to read tooling drawing and operate 2.5d projector, CMM, each type of measuring instruments; good coordination ability.

27. 经检验,时序为白噪声的零假设被拒绝。

The null hypothesis to be white noise has been rejected.

28. 检验员把所有不好的零件都给淘汰了。

The inspector threw out all the parts that didn"t work.

29. 检验员把所有不好的零件都给淘汰了。

The inspector threw out all the parts that didn"t work.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!