
词语导航
基本信息
词语:热腐蚀
繁体:熱腐蝕
拼音:rè fǔ shí
英语翻译
【化】 heat erosion; thermal etching
相关词条
1.thermaletching 2.heaterosion分词翻译
热的英语翻译:
ardent; caloric; craze; eager; fever; heat; hot; warm【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-
腐蚀的英语翻译:
canker; corrode; corrupt; decadent; degenerate; erode; erosion; cauterizationcorrosion; corruption; degeneration
【计】 corrosion; erosing
【化】 corrosion
【医】 causis; causticize; corrode; corrosion; decay; diabrosis; erode; erosio
erosion; exesion
翻译例句
1. 受化学或热腐蚀严重环境的金属表面。
The coating can be used on metal surfaces in the environment with severe chemical or heat corrosion.
2. 观察了热腐蚀的形貌。
The morphology of hot corrosion was observed.
3. 在热腐蚀环境中应用的高温合金会过早地失效。
Superalloys operated in an hot corrosion environment will be failed earlier.
4. 采用水热腐蚀技术制备的铁钝化多孔硅表面具有可调超结构。
Tunable superstructures were obtained in hydrothermally etched iron-passivated porous silicon (IPS).wWW.WEntIyI.cOM
5. 此外,“等效铬含量”概念可以在一定程度上预测此类合金的热腐蚀抗力。
In addition, the concept of "effective chromium content" seemed to give a correct prediction of the hot corrosion resistance of such alloy systems.
6. 利用热腐蚀法制备出用于环境扫描电镜(ESEM)研究反转电畴结构的样品。
The samples used for examining the reversal domain with ESEM were prepared by heat erosion.
7. 本文分析了热腐蚀的机理及燃油时钒在热腐蚀过程中所起的作用,并由此而得出了防治措施。
This paper analyzes heat corrosion mechanism and the effect of vanadium during heat corrosion, and therefore presents the preventive measure.
8. 通过改变溶液的组成成份,用水热腐蚀技术原位制备出具有不同表面钝化状况的四类多孔硅样品。
Through varying the components of the hydrothermal solution, four kinds of PS (porous silicon) are prepared by the hydrothermal method.
9. 根据热腐蚀的特点,吸收盐熔模型的合理成分,并考虑到热腐蚀与高温气体腐蚀的共性,提出热腐蚀的电化学模型。
The rational aspects of the fluxing model as well as the general characteristics existing in high temperature gaseous corrosion and hot corrosion are considered in the electrochemical model.
10. 利用X射线衍射(XRD)和扫描电镜(sem)等手段,对高温熔盐热腐蚀后的组织形貌、元素分布及物相进行了分析。
The microstructure? Element distribution and phase after hot-corrosion were analysed by means of X-ray diffraction (XRD) and scanning electron microscope (SEM).
11. DZ40M合金表面纳米和垂直裂纹结构热障涂层的抗燃气热腐蚀性能[J]。材料工程,2014,(5):66-72。
Gas hot-corrosion resistance of nanostructure and segmentation thermal barrier coatings on DZ40M superalloy[J]. Journal of Materials Engineering, 2014, (5):66-72.
12. 用高能激光束和电子束轰击实验材料,模拟聚变堆面对等离子体材料在等离子体破裂时的工作状态,考察了4种掺杂石墨材料在热冲击下的热腐蚀规律。
The thermal shock behavior of 4 kinds of impurity doped graphites was investigated under a simulated plasma disruption condition using high-energy laser and electron beam.
13. 该泵为两级、轴向吸入,卧式安装的后拉式泵,适用于热的、磨蚀的和腐蚀的介质。
The pump has a two-stage, end suction, horizontally mounted back pull-out design for hot, abrasive and corrosive liquids.
14. 热绝缘、声绝缘、防腐蚀绝缘和油漆材料。
Heat and sound insulation and anticorrosion insulation and painting materials.
15. 主要是由于冷凝器表面严重积灰堵塞,或者是受腐蚀影响而减弱了换热效果。
The main reason of which is the heat transfer efficiency is weakened by jamming heavily or corroding the surface of the condenser.
16. 分析了造成锅炉煤气管道系统腐蚀的主要原因,提出并实施了采用聚四氟乙烯钢覆热滚塑内衬管道的解决办法。
This paper analyzes the main causes of corrosion on boilers" gas pipelines, puts forth the measure of teflon-steel coated thermoplastic inner-cased pipe, which was implemented.
17. 随着热强碱腐蚀时间的延长,高锰钢的冲击韧度明显降低,碱脆开裂是造成高锰钢冲击韧度下降的主要原因。
With increasing corrosion time the impact toughness of high Mn steel obviously decreased. The major mechanism was effect of the caustic embrittlement cracking.
18. 对反应器壳体在热壁条件下可能发生的腐蚀和回火脆性进行了分析。
The corrosion and temper embrittlement of reactor shell probably occurred under hot wall condition were analyzed.
19. 结果表明,热自组装膜改善了镁基生物材料的腐蚀抗力和生物活性。
The results showed that the corrosion resistance and bioactivity of the bio-magnesium materials with heat-self-assembled monolayer were improved.
20. 热浸镀技术是防止钢铁材料在自然环境中受腐蚀的最经济有效的防护技术。
Hot dipping is the most economic and efficient technology to protect iron material from corrosion in nature circumstance.
21. 这种特别耐用的合金能够成功地抵抗长时间高温、硬水、酸、腐蚀物和热冲击所产生的破坏作用。
This tough alloy successfully resists the effects of prolonged high operating temperatures, hard water, acids, corrosion, and thermal shock.
22. 主要讨论阀控铅蓄电池故障主要原因,包括板栅腐蚀、水损失、早期容量损失、热失控。
The major cause of failure of VRLA batteries, including grid corrosion, water loss, premature capacity loss and thermal runaway, are discussed in this .
23. 该变色涂料具有较好的耐水性、耐腐蚀性、 耐候性和热变色效果。
The chameleon paint shows good water resistance, anti-corrosion, weatherability and chameleon effect.
24. 主要讨论阀控铅蓄电池故障主要原因,包括板栅腐蚀、水损失、早期容量损失、热失控。
The major cause of failure of VRLA batteries, including grid corrosion, water loss, premature capacity loss and thermal runaway, are discussed in this paper.
25. 介绍了在不拆除现有保温层的情况下,管体腐蚀检测系统在稠油热采注汽管道中的应用。
The application of tube body corrosion detection system in the steam injection pipelines for hot extraction of thick oil is introduced when the existing insulation layer is not dismantled.
26. 锌及锌基合金主要用于热浸镀锌,提高钢制件的耐腐蚀性能。
Zinc and Zinc-based alloys are used mainly in hot-dipping galvanizing to improving the corrosion-resistance of steel.
27. 并研究了高温析出对焊接热影响区及后处理应力腐蚀性能的影响。
The effects of high temperature pre-precipitation on the stress corrosion properties of the heat affected zone were also studied after welding.
28. 实验表明,采用新方法对阴极尖端进行腐蚀后得到的尖端阴极,同样可保证热发射束流的稳定性要求。
Our experiments showed that it can ensure the same stability of thermal emission current by use of a new method of corroding cathode point.
29. 结果表明,表面热浸镀铝进行表面合金化的材料具有很好的抗冲刷腐蚀能力。
The results show that surface alloying materials with thermal coated aluminium has excellent resistance to erosion corrosion.
30. 结果表明,表面热浸镀铝进行表面合金化的材料具有很好的抗冲刷腐蚀能力。
The results show that surface alloying materials with thermal coated aluminium has excellent resistance to erosion corrosion.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
