输出位用英语怎么说,输出位的英文翻译


词语导航

基本信息

词语:输出位

繁体:輸出位

拼音:shū chū wèi

英语翻译

【计】 carry-out bit

分词翻译

输出的英语翻译:

export; output
【计】 output; out-fan
【化】 export; output; turnout
【经】 export; exports

位的英语翻译:

digit; location; place; potential; throne
【计】 D
【化】 bit
【医】 P; position
【经】 bit

翻译例句

1. X111提供了一个线性输出位移成正比。

X111 provides a linear output proportional to displacement.

2. 清除命令会删除建置输出位置中的所有档案。

Clean command deletes all files in the build output location.

3. X100更为提供了一个线性输出位移成正比。

The X100 provides a linear output proportional to displacement.

4. 通过试验得到了实测阶跃响应曲线和输出位移曲线。

The experimental curves of step response and output displacement were obtained.

5. 叠层结构的输出位移因粘结层的变形而小于理论输出值;

The displacement output of multilayer was less than the theoretical output because of the deformation of the adhesive layer between each two layers of PLZT.

6. 通过实验研究了激光光束质量对PSD输出位置精度的影响。

In the experiment, the effects of laser beam quality on the output position precision of the PSD are analyzed.

7. 还必须能够选择输出位数,以便适应各种用途和应用程序的需要。

The number of output digits must also be selectable in order to accommodate the needs and requirements of a variety of purposes and applications.

8. 厨房打印机故障时,系统自动提醒报警以及转移打印输出位置。

System automatically reminds and shifts to the other printer when kitchen printer is out of order.

9. 测试指定的字符串是否可以成功设置,然后输出位置和描述性信息。

Tests whether the specified string could be set successfully, and then outputs position and descriptive information.

10. 而局部反馈可以是结合输出位移技术,也可以结合新的下层迭代方案。

As far as the method of local feed-back is concerned, either the output shift approach or the lower level iterative scheme can be used.

11. 提出了一种实现固定空间输出位置同步辐射双晶单色器的方法及联动机构。

A novel mechanism for the fixed-exit double crystal monochromator of Bragg-Bragg diffraction case used widely in synchrotron radiation was presented.

12. 将指定输入字符添加到带格式字符串的末尾,然后输出位置和描述性信息。

Adds the specified input character to the end of the formatted string, and then outputs position and descriptive information.

13. 像所有Positek传感器,X113提供了一个线性输出位移成正比。

Like all Positek sensors, the X113 provides a linear output proportional to displacement.

14. 配套型控制仪的最大输出位数是固定的,它适用于相应规格的脉冲袋式除尘器。

The maximum output digits of supporting type control device are fixed, which is suitable for the pulse bag house of the corresponding specification.

15. 将指定输入字串的字元加入至格式化字串的结尾,然后输出位置和描述性资讯。

Adds the characters in the specified input string to the end of the formatted string, and then outputs position and descriptive information.

16. 调节机构是将执行机构的输出位移变化转换为控制阀阀芯和阀座间流通面积变化的装置。

Adjusting mechanism is the executive body converts the output of displacement control valve spool and valve seat area change between the flow of the device.

17. 计算输入位元组阵列指定区域的转换,并将产生的转换复制到输出位元组阵列的指定区域。

Computes the transformation for the specified region of the input byte array and copies the resulting transformation to the specified region of the output byte array.

18. Location包含一个文件名和一个标记,该标记可以表明该位置是源代码还是一个输出位置。

A JavaFileManager.Location contains a file name and a flag that indicates if the location is a source or an output location.

19. 利用模糊自整定PID控制算法对压电陶瓷驱动器进行了闭环控制,提高了驱动器的输出位移精度;

Second, the control algorithm of self-tuning fuzzy PID was developed to realize high precision control on piezoelectric actuators.

20. 通过试验得到了输出位移曲线和压力曲线,同时较详细地讨论了影响液压伺服系统压力跃变的主要因素。

The displacement curve and pressure curve of outputting were got through test, the influences on servo hydraulic system about pressure jump were discussed in detail.WwW.wEntiYI.Com

21. 不过,本部分将描述影响输出位流(从而可能需要在消息流中进行显式设置)的SOAP . Context方面。

This section, however, describes those aspects of the SOAP.Context that affect the output bitstream and may, therefore, need to be set explicitly in your message flow.

22. 建立了超磁致伸缩执行器基于输入电压-输出位移的控制模型,实验测得系统频率响应曲线与仿真结果一致。

The control model based on input voltage and output displacement was built up, the frequency response curve of experimental measurements were exactly coincident withs…

23. 大多数地理处理系统工具都要获取数据集合输入并产生数据集合输出,大部分工具对话框都会询问数据集合输出位置。

Most geoprocessing tools take datasets as input and produce new datasets as outputs, so most tool dialogs ask you where you want to write the output dataset.

24. 由于要处理的代码模块有成百上千个,因此最佳起点是显示找到错误的输出位置,然后从该位置开始逆向查找来隔离问题。

With hundreds of code modules to deal with, a good place to begin is where the output revealing the bug is found, then work your way backward from there to isolate the problem.

25. 采用正交试验的方法对基于柔性悬臂梁的一维柔性结构进行了参数优化设计以获得最大的输出位移:对最优结构进行了强度校核、模态分析。

The geometry of the flexible cantilever based one dimension compliant mechanism is optimized to get the biggest output displacement by using orthogonal arrays and analysis variance.

26. 采用正交试验的方法对基于柔性悬臂梁的一维柔性结构进行了参数优化设计以获得最大的输出位移:对最优结构进行了强度校核、模态分析。

The geometry of the flexible cantilever based one dimension compliant mechanism is optimized to get the biggest output displacement by using orthogonal arrays and analysis variance.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!