
词语导航
基本信息
词语:焊铜
繁体:焊銅
拼音:hàn tóng
英语翻译
【机】 brazing solder
分词翻译
焊的英语翻译:
solder; weld
【电】 soldering
铜的英语翻译:
copper; cuprum
【医】 copper; Cu; cuprum
翻译例句
1. 传统上,任何接触焊铜镀锡热空气即(HASL)。
Traditionally, any exposed copper was plated with solder by hot air solder levelling (HASL).
2. 到目前为止,普通烙铁的焊嘴主要还是是铜,为了防止氧化,铜已经被处理加装铁皮或电镀。
So far, soldering iron tips have been made mainly of copper, and in order to prevent oxidization, the copper has been either iron-plated or chromlum-plated.
3. 锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。
Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.Www.WENtiYI.com
4. 不带软铜编织线的磁保持继电器,负载引出脚不能锡焊,不能随意扳动,且不能同时刚性固定两个引出脚。
Not with braided line relay, the load pin can not solder, not arbitrarily wrenched, two pins and rigid fixation.
5. 介绍了铜钨粉末烧结材料的性能特点,以及用此材料制成的电极和导电咀在焊按生产中的使用效果。
The performance features of copper-tungsten sintered materials and operating effects of electrode and nozzle made of the materials in welding production have been introduced.
6. 采用埋弧焊方法,通过改变焊丝铜含量来改变焊缝金属中的铜含量,研究铜对高强度低合金钢焊缝金属韧性的影响。
In this paper, the effect of copper content on the weld metal toughness in SAW of HSLA steels was studied by changing the copper content in welding wire.
7. 软铅焊使轻钢件、铜件或黄铜件的焊点非常好。
Soldering gives a satisfactory joint for light articles of steel, copper or brass.
8. 铜和铜合金具有优良的导电性、导热性和可焊性,是目前应用最广的金属材料之一。
Copper and copper alloys are one of the most widely used metals due to their excellent electric conductivity, heat conductivity, and welding ability.
9. 适用于铜材的焊接,例如铜和锡铜合金,尤其是用于铜锌合金和钢的连接焊。
Suitable for welding of copper materials, for example copper and tin bronzes , especially used for joining of copper zinc alloys and steels.
10. 介绍了应用于海洋油气管道施工的坡口机、带铜衬垫对口器、全位置自动焊等焊接装备和焊接工艺。
The applies in the ocean oil gas pipeline construction bevel machine article, the belt copper liner welds and pipeline auto welding machine, welding equipment and welding procedure were introduced.
11. 太阳能光伏焊带涂锡机经过多次的改良,克服了生产过程中锡渣多,表面不光亮,镀层不均匀,露铜等缺陷。
Solar photovoltaic welding tin-plate machine after manyimprovements, overcome the tin slag in the process of production, not shinysurface, uneven coating, defects such as copper.
12. 找出了用通常方法不能点焊纯铜的原因,介绍了纯铜点焊焊核形成的过程,指出以本文为依据正确地选择电极材料、电极形状、焊接设备和确定焊接规范,就可实现纯铜的直接点。
It points out that the direct spot welding of pure copper can be realized by the correct choice of pole material, pole form, welding equipment and criterion.
13. 铜及铜合金、镀锌铁皮的釬焊。
Soldering of copper, copper alloys and galvanized iron plain sheet.
14. FPC分敷铜和压延铜两种,敷铜板的铜箔是凸出来的,细看的话能从焊盘与FPC的连接处看出来。
FPC deposited copper and rolled copper two, copper clad plate of copper foil is convex and scrutiny to from the pads and the FPC connection point out.
15. 相反横点,锡环哪些是焊管交替16管组成,每个组成铜,铅和铁,铅。
Opposite the horizontal point, a ring of tin to which are welded tubes alternatively 16 tubes composed each composed of copper-lead and iron-lead.
16. 在AZ31镁合金待焊表面镀一层很薄的铜层来研究塑性材料的流动情况。
A thin Cu coating was deposited on both sides of AZ31 magnesium alloy to be joined to study the material flow in friction stir welding.
17. 全焊不锈钢CFXTM换热器可用于多种铜或其它材料不适用的用途。
All-welded stainless steel CFXTM heat exchangers can be used in many applications where copper or other metals are not suitable.
18. 介绍了铜与铜镶嵌片状钎料HL204点焊的工艺方法。
Spot welding procedure of copper with inlaid filler metal sheet HL204 is introduced, too.
19. 铜与低碳钢电阻扩散焊;静触头;电极形状;嵌料; 电位差;
Resistance diffusing soldering of copper and mild steel Static contact Electrode shape Inserting solder Potential difference;
20. 开裂主要原因为液相铜扩散进入奥氏体晶界引起晶界脆化,在应力作用下引起焊管开裂。
The main reason for cracking is liquid copper diffused into the austenite grain boundary and grain boundary embrittlement was caused, so the welded pipe cracked under stress.
21. 研制成功了一种新型铜基自熔性合金粉末,在高强度钢基体上采用等离子喷焊工艺制备焊层。
A newly developed self fusion Cu-based Cu-Ni-Sn alloy powder and the PTA coating technology are described.
22. 这些洞时被称为盲焊连接到一个内部铜层,要么埋葬外层焊连接两个或更多时,没有内部铜层外层。
These holes are called blind vias when they connect an internal copper layer to an outer layer, or buried vias when they connect two or more internal copper layers and no outer layers.
23. 年产钢带、无缝钢管、高频焊管及镍、金、铜、钴、铬铁等金属产品300万吨。
Ltd, etc. yearly output is 300ten thousand ton of steel brand, palte, seamless steel tubes, high frequency welded pipe and nickel, gold, copper, cobait, chromium iron etc.
24. 特别适用于铜铝镍材和钢材上的加层焊,加强抗磨损以及抗腐蚀性能。
Particularly suitable for copper aluminium nickel materials and overlay welding on steel, increased resistance to wear and abrasion.
25. 用途: 用途:适用低碳钢,不锈钢、铜软胶线等点焊和凸焊。
Usage: suitable for low carbon steel, stainless steel, copper soft glue wire etc spot and convex welding.
26. 由于原材料价格上涨,生产成本随之提高,制冷行业中“铝代铜”成为发展趋势。制冷管路中要有铜铝管接头,主要制造方法为焊接,其中电阻焊质量较好。
With increasing of raw material price and production cost as well, to employ aluminum pipe instead of cooper pipe in refrigeration field has become the trend.
27. 广泛用于电解片铜合金钢青铜生铁铜件之焊补。
Widely used in electrolytic copper alloy steel cast bronze pieces of copper pieces of weld-repair.
28. 广泛用于电解片铜合金钢青铜生铁铜件之焊补。
Widely used in electrolytic copper alloy steel cast bronze pieces of copper pieces of weld-repair.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
