
词语导航
基本信息
词语:可靠性测量
繁体:可靠性測量
拼音:kě kào xìng cè liáng
英语翻译
【计】 reliability measure
分词翻译
可靠的英语翻译:
credibility
【电】 confidence
测量的英语翻译:
guage; measure; meterage; scale; survey
【化】 measurement
【医】 measurement; mensuration; survey
【经】 calibration; take the gauge of
翻译例句
1. 这种对本地资源的竞争确实会影响被测量的响应的可靠性。
Such competition for local resources does affect the reliability of the measured responses.
2. 风险观念的测量仅依赖一个可靠性无法证实的条款。
The risk perception measure relied on a single item whose reliability cannot be confirmed.
3. 基于该数学模型,优化设计了高可靠性、高稳定性的信号调理电路,并在聚焦元件自动测量系统中得到了实际应用。
Based on this mathematics model, the optimum signal-processing circuit, having high reliability and high stability, is designed and applied to the automatic measurement system of the focusing units.
4. 系统的标定精度直接决定了系统的实际使用精度,而标定方法又直接影响着视觉测量系统的使用方便性和可靠性。
The actual accuracy is due to the calibration accuracy. Calibration methods affect the convenience and dependability of an optical measurement system directly.
5. 本研究的目的是评估现有方法的可靠性及取得正常人应用这些方法的测量值。
The aims of this study were to evaluate the reliability of the current methods and to derive normal population values with these methods.
6. 如何提高视觉检测技术的测量精度、速度及可靠性是其主要研究内容。
How to improve the precision, speed, and reliability of vision inspection system is its important research aspect.
7. 评述了高激发核的激发能及核温度的测量方法,以及这些测量方法的可靠性。
The methods measuring excitation energies and temperature of highly excited nuclear matter and their reliability have been summarized.
8. 线结构光的标定精度直接决定了测量系统的实际测量精度,而标定方法又直接影响着测量系统使用的方便性和可靠性。
The actual accuracy of an optical measurement system is due to the calibration accuracy. The calibration methods should possess the property of convenience and dependability.
9. 采用软件校正,提高了测量精度和整机的可靠性。
Software calibration method is used to increase measuring accuracy and reliability.
10. 接触式测量可靠性高,但是精度低。
Contact measure has high reliability but low accuracy.
11. 此次试验再次验证了带电测量的可行性与可靠性。
This test further verifies the feasibility and reliability of live line measurement.
12. 系统通过直流放电法测量单体电池内阻,保证了在线监测的可靠性。
The battery inner resistance is measured by DC discharge, which guaranteed the reliability of online monitoring.
13. 目的评价颈前路减压融合术后椎间高度变化的四种测量方法的可靠性。
Objective To study the reliability of four methods for the measurement of intervertebral height after anterior cervical decompression and fusion.
14. A 10流动式绝对重力仪通过近几年来的改进与实用研究,已说明其观测结果的稳定性、可靠性及具有较高的测量精度。
The A10 mobile absolute gravimeter provides us with high stability, high reliability and high measurement precision observed data after years improving and practicing in researches.
15. 以系统的可靠性为目标对扩散硅液位变送器测量系统进行综合设计和技术改进。
The measure system of diffuse silicon liquid level transmitter is designed and improved to meet the reliability requirements.
16. 与传统的磁敏传感器比较,巨磁阻传感器具有灵敏度高、可靠性好、测量范围宽、体积小、价格低等优点。
Compared with conventional sensors, giant magneto resistive (GMR) sensor has the advantage of high sensitivity, high reliability, wide measurement range, small volume and low price.
17. 本系统具有可靠性高、系统配置灵活、测量精度高等特点。
This system has some specific properties including high reliability, flexible configure and high precision of measure.
18. 与传统的磁敏传感器比较,巨磁阻传感器具有灵敏度高、可靠性好、测量范围宽、体积小、价格低等优点。
Compared with conventional magneto sensors, giant magneto resistance (GMR) sensor has the advantages of high sensitivity, high reliability, wide measurement range, small volume and low price.
19. 提出了从加工产品的最终测量数据分析工艺系统可靠性主要影响因素的方法。
The new method of analyzing the main influence factors of the technological system"s reliability from the final measuring data of machining products is presented.
20. 与传统的磁性传感器相比,巨磁阻传感器具有灵敏度高、可靠性好、测量范围宽、体积小、价格低等优点。
Compared to most conventional sensors, giant magneto-resistance (GMR) sensor has the advantage of the high sensitivity, high reliability, wide measurement range, small volume and low price.
21. 用DD 8000多道分析器和3路计数器的测量验证了它的可靠性。
The experiment reliability is verified by the measurement of DD8000 type multichannel analyser and 3-routes counter.
22. 针对传统油耗仪可靠性差、测量精度低的问题,设计了一种浮球式发动机油耗仪。
Concerning on the problem of poor reliability and low measurement precision of traditional volumetric fuel consumption meter, a ball float fuel consumption meter is designed.
23. 重点说明了提高测量精度、可靠性的原理、方法和技术实现。
The principle and method of increasing measurement precision and reliability, as well as the technology implementation are also described.
24. 最后通过实验表明了采用这些措施之后,测量仪器的可靠性和稳定性得到了很大的提高。
The experiments show that the reliability and the stability of inductive micrometer are highly improved by using these measures.
25. 本文主要描述如何进行电子测量仪器可靠性鉴定试验。
The paper mainly describes the work how we should do on reliability qualification test for the electronic measuring instruments.
26. 系统采用微机进行控制,因此可靠性高,测量准确,检查辊缝方便,可改善连铸钢坯质量。
Its control system utilizes microcomputer to control, so the results are of high reliability and measuring accuracy, handy to inspect and able to improve the quality of continuous casting.
27. 目的:评价数字标记点质心跟踪法在骨盆位移测量中的可靠性。
Objective: To evaluate the reliability of the digital marker tracing method combined with center-of-mass algorithm in measuring human pelvic displacement.
28. 为保障航空发动机的可靠性,要求精确测量发动机叶片不同界面处的内、外表面法线方向的厚度。Www.wEnTiYI.cOm
Precision measurement of blade wall thickness along the common normal of inner and exterior surfaces is required to guarantee the reliability of air engine.
29. 我们提出了闭合误差的概念,作为仪器测量精度的判据,测量仪器的瞬时均方差,以表征测量的重复性和可靠性。
We suggest "error of closure" asa criterion of measuring accuracy and use transient root-mean-square error to ex-press repeatability and reliability of measurement of the instrument.
30. 我们提出了闭合误差的概念,作为仪器测量精度的判据,测量仪器的瞬时均方差,以表征测量的重复性和可靠性。
We suggest "error of closure" asa criterion of measuring accuracy and use transient root-mean-square error to ex-press repeatability and reliability of measurement of the instrument.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
