回转窑用英语怎么说,回转窑的英文翻译


词语导航

基本信息

词语:回转窑

繁体:回轉窯

拼音:huí zhuǎn yáo

英语翻译

【化】 rotary kiln

分词翻译

回转的英语翻译:

circumgyrate; gyre; gyrus; slew; turn; circumgyration; gyration
【计】 gyro
【化】 gyrate; revolution; rotate; swing; whirl

窑的英语翻译:

kiln; stove
【化】 kiln

翻译例句

1. 回转窑是新型干法生产的中心设备。Www.weNtIyI.Com

Rotary kiln is the central equipment of NSP production line.

2. 利用水泥回转窑消纳处理可燃废弃物。

Disposal of combustible waste materials by using cement rotary kiln.

3. 而最重要的是水泥行业做水泥回转窑来使用。

And the most important is applied in cement industry as rotary kiln.

4. 本文介绍应用这种系统自动控制回转窑喂煤量的体会。

This article introduces the application of such an automatic system for rotary kiln coal feeding.

5. 介绍了处理回转窑焙烧含砷物料所产烟尘的试验研究。

This paper describes experiments on treating arsenic bearing dust resulted in rotary roosting kiln.

6. 介绍了炼钢红泥在链篦机回转窑球团生产中的应用情况。

In this paper, the application of steeling mud in the grate-kiln pelletizing production was introduced.

7. 当回转窑安装完毕,需要对回转窑进行试运转和调试工作。

When rotary kiln installation ends, need to rotary kiln commissioning and debugging.

8. 回转窑给料量恒定是保证回转窑热工平衡和物料平衡的基础。

Stable feed flow is the basic factor of ensuring heat and material balance of rotary kiln and it becomes a necessary condition of optimizing calcination technique.

9. 论文的最后给出了一个工业回转窑烧结温度专家控制器的设计。

Finally, an expert controller"s design of sintering temperature of industrial rotary kiln is discussed.

10. 采用回转窑加热的方法对高杂质钼铁合金氧化焙烧进行了研究。

The oxidizing roast of high impurity ferromolybdenum was studied by using rotary kiln.

11. 论述了低水泥用量耐火材料的优越性和球团回转窑的烘炉制度。

The superiority of low cement refractory material and the heating-up system of rotary palletizing kiln are discussed.

12. 实验室高温回转窑适用于冶金、地质、矿山、化工、建材等部门。

Laboratory rotary kiln is used in metallurgy, geology, mining, chemical industry, building materials and other departments.

13. 介绍一种回转窑机械运行状态计算机在线监测系统的设计与应用。

This paper describes the design and application of supervision of mechanic parameters on rotary kiln.

14. 因此对次氧化锌在工业中采用回转窑焙烧的方式脱砷是完全可行的。

It is completely feasible to remove Arsenic using the methods of smelting secondary zinc oxide in rotary kiln.

15. 回转窑是水泥厂的关键设备,轮带发生剥落掉块是窑中的常见故障。

Rotary kiln is key equipment in cement plants, and tyre peeling is the common faults during operation.

16. 结合生产实践,对本钢回转窑生产供转炉炼钢用高质量石灰进行研究。

Combined production practices, research is done on the high-quality lime which produced through rotary kiln for converter steel making at Bengang.

17. 回转窑火焰图像的正确分割对于提取回转窑工况参数具有重要的意义。

Accurate segmentation of flame image in rotary kiln is very important for the extraction of working parameters.

18. 文章提出了一种在回转窑火焰图像中自动分割物料区和火焰区的方法。

In this paper, I provide the auto-segment materiel section and flame section method of flame image of the rotary kiln.

19. 回转窑运行中由于轴线偏移,支承载荷分配不均导致托轮轴疲劳断裂。

Axis line deflection and asymmetric load distribution of the rotary kiln induce the cracking of supporting shaft frequently.

20. 在回转窑和磨机的修理中,用焊接的方法处理开裂问题是相当普遍的。

It"s quite common to deal with crack by welding in repair of kiln and grind mill.

21. 对回转窑传动扭矩的实测结果进行了分析,对现有的计算公式进行了修正。

It is analysised of some survey results of rotary kiln driving torque and revises the calculation formula now available.

22. 本文介绍了通过窑尾密封改造,解决了影响链篦机回转窑生产的诸多问题。

The modification of charge end sealing was presented in this paper, through this modification, many production problems were solved.

23. 分析结论与实际生产一致,为回转窑最佳运行状态的调整提供有效的理论依据。

The analysis results are consistent with practical production, which can provide effective theoretical guidance for adjusting rotary kiln into best operation state.

24. 针对复杂的水泥回转窑热工过程,提出了一种基于系统运行模式的智能控制算法。

For complex heating processes of cement rotary kilns, an intelligent algorithm based on system running pattern is proposed.

25. 通过对回转窑滚圈的应力分析,探讨了其断裂的原因,并提出了相应的改进措施。

The fracture cause of a rolling ring of a rotary kiln was studied through a stress analysis and some improvements were proposed.

26. 本文就回转窑的筒体大修、托轮调整以及托伦部件的装配做简要的论述供同行们参考。

The overhaul of kiln shell, adjustment of carrying roller and assembly of roller parts are briefly stated in this paper.

27. 滚圈是回转窑最重要的支承部件,运转中弯曲应力造成的疲劳开裂是其主要失效形式。

Fatigue cracking of a roller is the main failure form due to the alternate bending stress in operation.

28. 利用水泥工业回转窑处理城市污泥是可行的,具有传统处理方法无法相比的优点和前景。

It is feasible to treat city sludge in cement rotary kilns, which have excellent advantages and prospects compared with traditional governing method.

29. 利用水泥工业回转窑处理城市污泥是可行的,具有传统处理方法无法相比的优点和前景。

It is feasible to treat city sludge in cement rotary kilns, which have excellent advantages and prospects compared with traditional governing method.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!