
词语导航
基本信息
词语:聚苯
繁体:聚苯
拼音:jù běn
英语翻译
【化】 polyphenyl
分词翻译
聚的英语翻译:
assemble; gather
【建】 poly-
苯的英语翻译:
benzene
【化】 benzene; benzol; benzole
【医】 benz-; benzene; benzol; phen-; phene
【经】 benzene
翻译例句
1. 通过循环伏安法合成聚苯胶膜电极。
Polyaniline film electrode was synthesised by cyclic voltammogram.
2. 研究分析了聚苯硫醚的成形工艺。
This article researches and analyzes its manufacture process of PPS.
3. 本文介绍了聚苯硫醚国内外最新进展。
This paper introduces new advance of poly(phenylene sulfide)(PPS).
4. 介质为聚酯、聚丙烯、聚苯硫醚薄膜等。
Medium for polyester, polypropylene, polyphenylene sulfide film and so on.WWw.wenTIyi.CoM
5. 石墨甚至其线性类似物聚苯,极不易溶解。
Graphite and even its liner counterpart, poly (p-phenylene) are too insoluble.
6. 本文报导了聚苯撑醚砜碱法缩聚动力学的研究。
The present paper reports the studies of the alkaline polycondensation kinetics of poly (phenylene ether sulfone).
7. 本文旨在探讨三聚氰胺对聚苯硫醚树脂的交联机理。
This paper approaches the effect of melamine on the cross-linking mechanism of polyphenylene sulfide resin.
8. 测试了对聚苯树脂碳电极组装的锂离子电池电化学性能。
The electrochemical behavior of the lithium ion battery using poly(p-phenylene) resin carbon materials as electrodes have been studied.
9. 先穿一层薄的化纤衣料比如聚苯烯,这样可以吸收身上的汗。
Start with a thin layer of synthetic material such as polypropylene, which wicks sweat from your body.
10. ZL聚苯颗料保温材料用于外墙外保温,可有效解决裂纹的产生。
The ZL polystyrene granule thermal insulation material used for exterior wall outer thermal insulation can solve cracking problem effectively.
11. 聚苯硫醚是一种具有许多优良特性的工程塑料,其应用十分广泛。
Polyphenylene sulfide is a kind of engineering plastic with many excellent characters, and it "s used widely.
12. 研究了喷涂工艺和碳化硅含量对聚苯硫醚复合涂层力学性能的影响。
The effects of paint-spraying process and silicon carbide(SiC)content on mechanical properties of polyphenylene sulfide (PPS) composite coating have been studied.
13. 聚苯颗粒保温料浆是由聚苯颗粒和保温胶粉料分别按配比包装组成。
Polystyrene particles insulation pulp by polystyrene particles and heat preservation is powder materials separately according to ratio of packing.
14. 通过微观观察及分形维数计算结果分析聚苯酯铝硅封严涂层失效原因。
Through microscopic observation and calculation of fractal dimension the seal coating failure of Al-Si.
15. 对聚苯硫醚合成工艺进展、新品种研制开发及PPS合金作了叙述。
The progress in the synthesis technology, the development of new grades of product and PPS alloy were also described in this paper.
16. 简要介绍了聚苯硫醚(PPS)与其他聚合物进行共混改性的研究进展。
It briefly introduced the research progress of the modification of polyphenylene sulfide (PPS) blended with other polymer.
17. 聚苯硫醚(PPS)是一种高性能的特种工程塑料,具有各种优异的性能。
Poly(phenylene sulfide) (PPS) is a high-performance engineering plastics with many excellent properties.
18. 对聚苯硫醚(PPS)共混是材料获得更优性能和特殊新功能便捷有效的办法。
Polymer blending is an effective method to obtain PPS (polyphenylene sulfide) of superior properties and with some special functions.
19. 研究碳纤维布的含量、表面处理方法及填料等对聚苯硫醚复合材料性能的影响。
The influence of carbon fiber cloth content, different surface treating methods and filler on the properties of PPScomposite is studied.
20. 研究了在高纯聚苯硫醚(PPS)树脂合成中,水量的变化对产品质量的影响。
The influence of water content on the quality of the product in the synthesis of Poly (phenylene sulfide) (PPS) with high purity was studied.
21. 本文采用正交试验设计法,成功地筛选出聚苯硫醚(PPS)泥浆干燥工艺参数。
This article studied dry process of PPS prepreg which is impregnated with slurry method through the use of orthogonal experiment method.
22. 并分别采用再生聚苯颗粒和原发性聚苯颗粒,对保温浆料性能影响进行了试验研究。
Experimental study is made on influence of different grain upon property of foamed EPS thermal insulation mortar using reclaimed grain and original grain separately.
23. 聚苯硫醚(PPS)纤维是一种具有优异的热稳定性、耐化学腐蚀性、阻燃性的高性能合成纤维。
Polyphenylene sulfide (PPS) fiber is a kind of high-performance synthetic fiber with excellent thermal stability, chemical resistance, flame retardancy.
24. 加入聚苯硫醚(PPS)的PTFE基复合材料的损耗因子曲线只出现一个明显的峰,峰值变大;
The loss factor curve of PTFE/PPS appears only one peak, and the loss peak value increases.
25. 并介绍聚苯酯填充聚四氟乙烯的三大特点:极大的权限PV值、极低的磨耗量和不损伤对磨偶件。
The three characteristics of PTFE filled with p-oxybenzoyl homopolyester are introduced, i. e. the biggest maximum PV value, the lest abrasion and outstanding kinetic friction.
26. 碳纤维布经过表面处理后与聚苯硫醚的粘接强度大大提高,其中用丙酮浸泡的效果好于高温热处理;
After the carbon fiber"s surface treated, the interfacial adhesive strength of the composites increased greatly and the effect of treating with acetone is better than that with heat.
27. 碳纤维布经过表面处理后与聚苯硫醚的粘接强度大大提高,其中用丙酮浸泡的效果好于高温热处理;
After the carbon fiber"s surface treated, the interfacial adhesive strength of the composites increased greatly and the effect of treating with acetone is better than that with heat.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
