
词语导航
基本信息
词语:计算机辅助机
繁体:計算機輔助機
拼音:jì suàn jī fǔ zhù jī
英语翻译
【计】 computer satellite
分词翻译
计算机的英语翻译:
adding machine; calculating machine; calculator
【计】 brain unit; computer; computing machinery; computor; FONTAC; ILLIAC IV
【经】 calculating machine
辅助机的英语翻译:
【机】 auxiliary
翻译例句
1. 根据模型,基于VB 6.0平台设计了连续采煤机滚筒的计算机辅助设计系统。
A computer auxiliary design system of continuous miner cutting drum is designed based on VB6.0 and the mathematical models.
2. 为验证本文研究的塔式起重机计算机辅助设计平台的正确性,对某厂生产的5012塔机的塔身进行了再设计。
For verifying accuracy of the investigative platform, we designed the tower crane mast again about the type of 5012.
3. 本文介绍了为满足六足步行机计算机仿真的需要,所开发的对其运动学进行计算机辅助研究的程序库。
This paper introduces the softwares developed for computer aided study on kinematics of the six-leg walking vehicle to meet the needs for the walking vehicle computer simulation.
4. 提出一种利用计算机辅助缝纫机机头造型设计的方法。WwW.WeNTiyI.cOM
An approach to computer aided modeling design for sewing machine is presented in this paper.
5. 以三维设计软件MDT为平台,对推土机转向离合器的计算机辅助设计系统的构成和功能特点进行研究,并分析使用这种系统的现实意义。
Computer aided design of steering clutch in the bulldozer based on three-dimensional design software MDT was studied in theories. And the realism significance of this method was discussed.
6. 为了辅助舰载直升机安全着舰,一种基于计算机视觉的助降技术被提出。
For assisting shipboard helicopter in landing safely, an assisted landing technology for shipboard helicopter was proposed based on computer vision.
7. 从制品设计、模具设计、成型工艺、专用注塑机、计算机辅助分析等方面对碱性蓄电池塑料壳进行了研究。
The design, molding techniques, special injection molding machine and computer assistance analysis of the alkaline storage battery plastic shell were discussed.
8. 阐述了塔式起重机附着装置的设计计算理论,建立了基于该理论的塔机附着装置计算机辅助设计系统。
It presents the designing principle of the attached member for tower crane, establishes the computer aided design system of this machinery.
9. 基于多操作机的排牙机器人是一套计算机辅助设计、机器人辅助操作的全口义齿制作系统。
The tooth arrangement robot based on multi-manipulator is a full denture manufacturing system of computer aided design and robot aided operation.
10. 本论文从数值分析的角度,以计算机编程为辅助手段,对掘进机装载机构的工作特性进行模拟研究。
The paper has tried to Simulate and analyse working characteristic of loading mechanism in excavating machine using numerical mathematics analysis by computer"s program.
11. 本文介绍了起重机立式回转机构计算机辅助设计的有关问题。
This paper introduces problems in regard to the CAD of the crane"s vertical revolving mechanism.
12. 介绍桥式起重机金属结构计算机辅助设计系统的软、硬件组成、主要功能和结构特点。
This paper mainly introduces the principle and composition properties of bridge crane CAD system for bridge structure.
13. 本文主要论述双速卷扬机的计算机辅助设计及软件开发。
The computer aided design procedure and relative software development about double-speed winch will be mainly described in this paper.
14. 本文介绍了起重机卷扬机构计算机辅助设计系统。
This paper introduces the computer aided design and drafting system developed by using the microcomputer for the hoisting mechanism of cranes.
15. 总结了计算机辅助设计和有限元方法在光机系统设计中的应用,并分析了评价镜面变形常用的数据处理方法。
The applications of the computer aided design technique and the finite element method were summed up. Computational algorithms were introduced to process datas of the surface deformation.
16. 本文介绍一种用电视摄像机、微型计算机以及一些辅助设备组成的简易光学多道分析器。
A simply constructed optical multichannel analyser is presented. The instrument includes a video camera, a microcomputer and some accessories.
17. 这是计算机辅助单片机系统设计软件工具的重要组成部份。
It is an important pact of the software tool of computer-aided single chip system design.
18. 根据液压系统设计和分析的需要,在VB的平台上开发了全液压推土机驱动系统计算机辅助设计软件。
By the request of the design and analysis of the hydraulic, based on the VB, the Computer-Aided-Software of the drive system of the full hydraulic bulldozers has been developed.
19. 介绍了AM— 50 0采煤机旁通阀的试验系统和成熟的计算机辅助测试( CAT)方法。
This paper introduces testing system and mature CAT method of AM—500 winning machine"s side through_valve.
20. 采用内点惩罚函数法寻求最优值,以小型拖拉机最终传动圆柱齿轮体积最小为目标函数对其进行计算机辅助设计。
The optimizing design model of cylindrical gear of tractor final drive is presented and its target function is min-volume.
21. 采用内点惩罚函数法寻求最优值,以小型拖拉机最终传动圆柱齿轮体积最小为目标函数对其进行计算机辅助设计。
The optimizing design model of cylindrical gear of tractor final drive is presented and its target function is min-volume.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
