
词语导航
基本信息
词语:加劲板
繁体:加勁板
拼音:jiā jìn bǎn
英语翻译
【化】 plate stiffener; reinforced plate; stiffened plate; stiffening plate
分词翻译
加劲的英语翻译:
【化】 stiffening板的英语翻译:
bat; board; plank【计】 board
【医】 assula; bar; board; disc; disci; discus; disk; lamella; lamellae
lamina; laminae; plasue; plate; table; tabula; tile
翻译例句
1. 大跨度钢桥加劲板件由于板件幅面较大,一般采用正交异性加劲板件。
With greater width, the stiffening plate on a large span steel bridge is usually of the orthotropic type.
2. 加劲板模型可包含多种加劲肋形状,推导过程中计入焊接残余变形的影响。
The panel can be composed of various shapes of stiffeners. Post-weld initial deflection is considered during the process.
3. 计算了飞机机翼加劲板和飞机起落架旋转臂在复杂谱载荷作用下的疲劳裂纹扩展寿命。
The fatigue lives of the stiffened panel of a wing and the landing gear of an aircraft under spectrum loadings also have been predicted.
4. 另外两个节点分别考虑了连接在梁翼缘的水平加劲板的作用和连接上下两个翼缘的垂直三角板的作用。
Another detail considers the addition of horizontal reinforcing plates (cover plates) to the beam flanges; a third adds vertical triangular (fin) plates to both beam flanges.
5. 对有端板加劲肋的外伸端板连接节点进行了循环荷载作用下试验研究,分析加劲肋对外伸端板连接节点性能的影响。wWW.WeNtiyi.COm
Research on extended end-plate connection with end-plate stiffer under cyclic load by test, discuss the effect of stiffer on the capability of the connection.
6. 本文介绍了几种加固方法,如内置加劲环加固、环口板加固、内置插板加固和主管壁厚加固等。
Several strengthening methods, including stiffened internal ring reinforcement, collar plate reinforcement, internal plate reinforcement and chord thickness reinforcement, are introduced here.
7. 分析了节点端板厚度、螺栓类型、端板的加劲肋等因素对节点刚度以及抗弯承载力的影响。
The factors, such as end -plate thickness, bolt"s types , beam and column " flank , that can effect on the joint rigidity and moment capability, are analyzed.
8. 本文介绍了梁柱端板连接的一种满足某种建筑要求的加劲方法,即采用槽钢代替传统的加劲方式作为加劲肋。
This paper based on the theory of Cold Roll Forming for groove steel, discuss the methods for confirming the figures and the dimension for groove steel.
9. 刚性横梁(8)的高度在侧边加劲肋板(2)顶部之上。
The height of the rigid crossbeam (8) is arranged above the top part of the side stiffening rib plate (2).
10. 刚性横梁(8)的高度在侧边加劲肋板(2)顶部之上。
The height of the rigid crossbeam (8) is arranged above the top part of the side stiffening rib plate (2).
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
