
词语导航
基本信息
词语:加工性
繁体:加工性
拼音:jiā gōng xìng
英语翻译
【化】 workabilityWWw.wenTiYi.COm
分词翻译
加工的英语翻译:
machining; process
【化】 processing
【医】 elaborate; elaboration
【经】 extra work; process; processing; transform
翻译例句
1. 它的可机加工性和不锈钢相同。
Their machinability is similar to that of stainless steels.
2. 超硬脆材料的难加工性制约了其推广应用。
Hard machinability of hard-brittle material is crucial for its application.
3. 优异的高低温循环稳定性并有良好的机械加工性。
Excellent high and low temperature cycle stability and has good mechanical processing of.
4. 试图用指标体系来描述和评价材料的切削加工性。
The material cutability is described and evaluated with a target system and the fuzzy comprehensive evaluation method.
5. 改善硫化锰和氟化钙的分布,将会改善切削加工性。
To improve the homogeneity of manganese sulfide and calcium fluoride, the machinability could be enhanced.
6. 对轿车发动机缸体的材质和加工性进行了实验研究。
The structure, property and machinability of materials of sedan-car engine block was tested and studied.
7. 钨及其合金是非常好的工程材料熏但其切削加工性差。
Tungsten and its alloy are very good materials in engineering, but their machinability is worse.
8. 但由于聚噻吩的加工性差、力学性能低等缺陷,使其应用受到制约。
But until now, its application is limited for several defects as poor working abilities and poor mechanical performances.
9. 辽宁岫玉以颜色鲜艳,质地细腻,硬度适宜,加工性好而驰名国内外。
Xiuyan jade is famous at home and abroad in bright-coloured, fine-grained, favourable hardness and processing.
10. 探讨晶体材料的切削加工性,重点分析切削条件对实现镜面车削的影响。
The paper presents the machinability of crystal materials, and emphasizes the influence of cutting conditions on the mirror finish.
11. 本文对聚乙烯醇的水溶性、成膜性、热塑加工性等使用性能进行了讨论。
In this article, the water-soluble ability, film forming ability and thermoplastic treatment ability of the polyvinyl alcohol are discussed.
12. 本文探讨了晶体材料的切削加工性,重点分析了切削条件对表面粗糙度的影响。
The machinability of crystal material is studied, and the influence of the cutting condition on surface roughness is analyzed.
13. 现场和研究工程师们的进一步目的是阐明如何才能改进成形操作时材料的加工性。
The further aim of both plant and academic engineers is to understand how it is possible to improve the workability of materials in forming operations.
14. 探索了AN/MAA共聚物泡沫塑料夹层结构复合材料的成型加工性和力学性能。
At last, we tested the processing and mechanical properties of AN/MAA copolymer foam sandwich core material.
15. 分析了钛合金的类型与特性,并结合BT20钛合金对其切削加工性进行了探讨。
The types and features of Titanium alloys are pointed out and the machining features of BT20Titanium alloys are also analyzed and discussed in this paper.
16. 分析了颗粒复合对氮化硅基陶瓷复合材料的火花放电加工性及切削性能所起的作用。
The effect of particles on the electrical discharge machining (EDM) and cutting property of silicon nitride-based composites was analyzed.
17. 通过陶瓷自身显微结构设计来增强陶瓷材料的可加工性是解决陶瓷难加工问题的关键。
Improving machinability of engineering ceramic materials via microstructural design is the key to resolving the problem of difficult machining of ceramic materials.
18. 过渡金属离子掺杂微晶玻璃结合了玻璃的易加工性和透明晶体具有高效宽带发光的优点。
Transition metal ion-doped glass-ceramics can combine the advantages of easy process ability of glass and high emission efficiency in broadband of transparent crystal.
19. 流变特性表明共混物可加工性,添加淀粉母料的共混物的力学性能有所降低而降解性加快。
The rheological property indicates the machinability of the blend and the mechanical property of the blend after the addition of starch decreased but the degradation property speeded up.
20. 经渗碳及淬火后,具有表面硬度高、心部韧性好的特点、冷变形塑性中等,切削加工性好。
Carburizing and quenching, with high surface hardness, good toughness characteristics, the heart of cold plastic deformation of medium, cutting is good.
21. 通过钙的变性处理,B30钢中的氧化物被硫化物所包裹,从而进一步改善钢的切削加工性。
The oxide inclusions can be enveloped by sulfide inclusions thus improving machinability of B30 steel through calcium treatment.
22. 箱体类零件特征映射的过程包括特征筛选、特征分类、特征匹配、特征分解和可加工性评估。
The principle of feature mapping for box components has been discussed. It consists of feature selection, classification, match, decomposition, and machining judgement.
23. 为了客观评价陶瓷材料的可加工性,建立了可加工陶瓷材料可加工性评价的数据包络分析模型。
In order to evaluate machinability of ceramics materials objectively, data envelopment analysis (DEA) model for machinability evaluation of machinable ceramic materials was established.
24. 文中主要针对玻璃钢件切削加工性较差的问题,采用带有金刚石磨粒磨头对玻璃柱件进行加工。
According to the problem that the remove of fiberglass is worse than metal material, grinding head with diamond abrasive is used to process the fiberglass column in this paper.
25. 针对复杂箱体多层同轴孔的分解和加工性判断进行了研究,并应用于CAPP -NC系统中。
The method of decomposition and machinability evaluation used for multi-layer and concentric holes of complex box-shaped parts is discussed and it has been applied to CAPP-NC system.
26. 用于橡胶中,可增加橡胶的体积,改善橡胶的加工性,起半补强或补强作用,并可调节橡胶的硬度。
Used in rubber, can increase the volume of the rubber, to improve the rubber processability, half reinforcing or reinforcing effect, and can adjust the hardness of rubber.
27. 结果表明:苯胺与带有极性或可溶性基团的苯胺衍生物共聚可有效提高聚苯胺的溶解性和可加工性。
The results showed that: the solubility and processability of polyaniline can be increased through aniline copoly with aniline derivative with polar or soluble group.
28. 结果表明:苯胺与带有极性或可溶性基团的苯胺衍生物共聚可有效提高聚苯胺的溶解性和可加工性。
The results showed that: the solubility and processability of polyaniline can be increased through aniline copoly with aniline derivative with polar or soluble group.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
