故障识别用英语怎么说,故障识别的英文翻译


词语导航

基本信息

词语:故障识别

繁体:故障識別

拼音:gù zhàng shí bié

英语翻译

【化】 failure recognition

分词翻译

故障的英语翻译:

breakdown; fault; hitch; malfunction; stoppage; trouble
【计】 booboo; F; failure; fault; malfunction
【化】 malfunction
【经】 breakdown; trouble

识别的英语翻译:

distinguish from; identify
【计】 awareness; ID
【医】 cognition; noesis
【经】 identification

翻译例句

1. 为了方便快速识别错误,故障识别通常采用新机制。

To facilitate rapid reaction times, fault recognition is usually carried out by newly developed mechanisms.

2. 通过分析广义似然比方法,指出该方法不能用于多星故障识别。

The generalized likelihood test method is studied, and the result shows that it is unable to identify the simultaneous multi-faulty satellites.

3. 旋转整流器故障识别是无刷励磁同步电机故障监测的难点之一。

Recognizing faults of rotating rectifiers is one of the difficult problems in monitoring synchronous machines with brushless excitation systems.

4. 本文从旋转失速的振动机理出发,归纳了旋转失速的故障识别特征。

Based on the study of mechanism of rotating stall, the distingushable character of rotating stall are summed up in this paper.

5. 提出了空调系统传感器故障检测、故障识别、故障重构的主成分分析方法。

The principal component analysis (PCA) approach for sensor fault detection, identification and reconstruction in HVAC system is presented.

6. 从而实现机组三维转速谱阵图瞬态振动特征的自动提取和故障识别与诊断。

Therefore, the automatic extraction of features of waterfall diagrams, and the identification and diagnosis of fault are realized.

7. 对信号进行局域波分解后,建立基于时频分布的信息熵,以此作为故障识别的参数。

After signal local wave decomposition, the information entropy according to time-frequency distribution was established, and it was used as characteristic parameter for fault recognition.

8. 神经网络所具有的学习与认识、信息加工等能力使得它在故障识别技术中独领风骚。

And neural network has many advantages in diagnosis, such as study by himself, the ability of information processing.

9. 针对带并联电抗器的超高压输电线路,提出一种单相自适应重合闸永久性故障识别的新方法。

A novel method of identifying permanent fault for single-phase adaptive reclosure in transmission lines with shunt reactors is proposed.

10. 选取好特征向量后,构建三层BP网络,训练后用其对样本进行故障识别,取得了良好的效果。

After choosing the characteristic vector, BP network of three layers is structured and trained, discern the faults to the sample, and made a good result.

11. 通过研究网络流量的时频分析,提出了一种新的基于平滑魏格纳分布(WVD)的故障识别算法。

A novel fault identification algorithm based on smooth pseudo Wigner-Ville distribution (WVD) is proposed, which focused on the time-frequency analysis of network traffic.

12. 实验数据表明:该算法收敛速度快,能有效地识别故障,对类似电气设备的故障识别有参考价值。www.weNtiyi.Com

The experiment data show that the algorithm converges quickly and recognizes faults efficiently. It has a reference value for faults recognition of similar electrical equipment.

13. 既然是人工进行的,就必然有疏漏和考虑不全面的地方,而且人工对故障识别与诊断的周期也很长。

It was through manpower to identify and diagnose the fault, and there were must oversight in the process and the periods was very long too.

14. 针对不同故障类型下的液压泵振动信号具有不同复杂性的特点,将多尺度熵引入到液压泵故障识别中。

The vibration signals of hydraulic pump with different fault types have different complexity. The multi-scale entropy is introduced into the fault identification of hydraulic pump.

15. 为了提高多元统计过程控制的故障识别能力,提出了一种基于多元统计过程控制的识别故障源的新方法。

To enhance the ability of fault recognition, a new method for searching the fault origin from the multivariate statistical aspect is presented.

16. 在对采集到的信号降噪后,利用“小波包-能量”法提取特征量,并将其输入到神经网络中进行故障识别。

After noise reduction in the signal, using "wavelet packet-energy" to extract the characteristic vector and input them to the neural network for fault identification.

17. 本文研究、设计的机车电传动电路故障诊断系统是一个集信号采集、数据传输和故障识别为一体的应用系统。

The fault diagnosis system of the locomotive electric transmission circuit described above is an application system, which include of signal sampling, data transmission and fault identification.

18. 接下来提出采用脉冲电流法完成定子放电故障信号的采集,应用基于最小距离法对定子局部放电样本进行故障识别。

And then a method of partial discharge monitoring based on pulse current and a technique of fault diagnosis based on the minimum distance method to stator winding are presented.

19. 通过仿真和空调系统模型试验证明了该方法在网络训练速度,抗干扰能力及各种传感器故障识别准确率等方面的有效性。

Effectiveness of the method in networks training speed, anti-interfering ability and identifying veracity of sensor faults are proved by simulation and model test of conditioning system.

20. 分析了数控机床故障诊断技术研究现状,阐述了数控机床故障诊断的原则、故障识别的方法以及故障的诊断与维修技巧。

The technique present of mechanical fault diagnosis for numerically controlled machine tool was discussed, principle and methods of nc machine tool fault diagnosis were described.

21. 本文根据粗糙集理论,对设备的振动故障诊断决策表进行属性约简,以提取故障识别的重要属性,降低决策表的冗余性。

Based on that theory, this paper deals with the attribute reduction for the fault diagnosis decision-making table of the vibration equipment.

22. 该方法将振动信号小波包分解后的频带能量作为特征向量,输入到由多个支持向量机构成的多故障分类器中进行故障识别和分类。

According to the method, the energy of different frequency bands after wavelet packet decomposition constitutes the input vectors of support vector machine as feature vectors.

23. 本文针对小波分析之后提取的特征向量,构建了与之相适应的神经网络进行故障识别,并对小波和神经网络的结合方式进行了设计。

After wavelet analysis extracts feature vectors, the paper constructs corresponding neural network for fault identification, and designs the combination of wavelet and neural network approach.

24. 将优化得到的复合特片作为故障识别的分类器,并根据不同的检测环境,选取不同的终端符集,从而降低检测环境对诊断结果的影响。

Then the optimal compound feature is searched by GP in the statistics and operators library. The compound feature is taken as classifier of fault diagnosis.

25. 此系统采用AT89S52单片机,利用红外线的直线传播与叠加原理实现,设计的硬件电路简单,具有高抗干扰能力、故障识别能力强的特点;

This system adopted the single computer AT89S52, the hardware circuit was very simple and it had the characteristics of high anti-jamming capabilities and a strong ability to identify.

26. 文中讨论了零序电流暂态分量的大小和提取方法,对数字仿真和混合仿真试验数据进行分析,结果表明零序电流暂态分量用于单相接地故障识别是可行性的。

We choose the transient zero current prior to others, for it is bigger than others mostly. This paper discusses the size of transient zero current and the method of analyzing it.

27. 提供一种识别故障的算法机制。

Provides an algorithmic mechanism for identifying the fault.

28. 发生故障时,让软件快速识别失败并重试请求。

When failures happen, have software quickly identify those failures and retry requests.

29. 识别、指定和解决常见交换网络的介质问题、配置问题、自动协商和交换硬件故障。

Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures.

30. 识别、指定和解决常见交换网络的介质问题、配置问题、自动协商和交换硬件故障。

Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!