
词语导航
基本信息
词语:缓冲存储区
繁体:緩沖存儲區
拼音:huǎn chōng cún chǔ qū
英语翻译
【计】 buffer storage device
分词翻译
缓冲的英语翻译:
amortize; buffer; cushion
【计】 buffering
【化】 buffer
【医】 buffer; buffering
【经】 buffer
存储区的英语翻译:WWW.weNTiyI.cOM
【计】 memory area; memory block; storage area; storage zone
翻译例句
1. 这一信息存储在已经为每个处理器分配的追踪缓冲区中。
This information is stored in trace buffers that have been allocated for each processor.
2. 可以连续地将跟踪数据写到文件中,作为存储内跟踪的扩展;但是在这种情况下不是为每个线程分配一个缓冲区,而是至少分配两个。
You can write trace data to a file continuously as an extension to the in-storage trace, but instead of one buffer per thread, at least two buffers per thread are allocated.
3. 日志缓冲区——为存储更改数据的前后映像而分配的内存。
Log Buffer - Memory allocated for storing before and after image of changed data.
4. 图1描述了一个存储了一些数据的抽象缓冲区。
Figure 1 illustrates an abstract buffer when stored with some data.
5. 通常好的做法是至少保留百分之一的空间,以便在完全用尽存储空间之前,提供最低限度的缓冲区空间。
It is generally a good idea to reserve at least one percent to give you a minimal buffer before you completely run out of space.
6. 缓冲区缓存——为存储从物理数据文件读取的数据块而分配的内存。
Buffer Cache - Memory allocated for storing data blocks read from physical data files.
7. 当浏览器调用微型云时,大多数缓冲区指针被分配了存储。
Most of the buffer Pointers are allocated storage when a browser calls the tiny cloud.
8. 对DMAGETB进行排队,从而在将现有数据存储回去之后,用更多数据重新填充缓冲区。
Queue a DMA GETB to refill the buffer with more data after the existing data is stored back.
9. 这会强制传输由MFC本身进行序列化,因此总会等待,直到当前的转换被 PUT到系统存储中,然后才会 GET更多数据到缓冲区中。
This forces the transfers to be serialized by the MFC itself, so it will always wait until the current conversion is finished being PUT into system storage before GETting more data into the buffer.
10. 更改缓冲区大小将会增加队列管理器的存储需求。
The impact of changing the buffer sizes is to increase storage requirements for the queue manager.
11. 如果存储过程被注册为FENCED,那么数据库管理器就禁止过程访问它的内部资源(比如数据缓冲区)。
If a stored procedure is registered as FENCED, the database manager protects its internal resources (for example, data buffers) from access by the procedure.
12. 逻辑日志缓冲区是用来存储最后一次备份开始的逻辑日志记录的。
Logical-log buffer is used to store logical log records since last backup.
13. 实现一个函数来返回当前存储在抽象缓冲区中的字节数目,这样可能会带来好处。
You may benefit by implementing a function that returns the number of bytes currently stored in an abstract buffer
14. 现在,需要决定如何存储当前为“filling”的缓冲区,并能够设置这些标志;同样,不使用分支。
Now you need to determine how to store which buffers are currently "filling," and be able to set these flags without branching.
15. Rico在初始装载期间取出150行数据,并使用缓冲区存储该数据。
Rico fetched 150 rows of data during the initial load and used buffering to store the data.
16. totalLoength记录当前存储在缓冲区中的字节数。
The totalLoength records the number of bytes currently stored in the buffer.
17. 等待、处理并将数据存储回缓冲区。
Wait for, process, and store back the data in the buffer.
18. 但是,如果总的缓冲区大小太大,并且没有足够的存储器可用来分配给它们,那么将为每种页大小分配最少的缓冲池,性能就会急剧下降。
However, if the total buffer size is too large, and there is not enough storage to allocate them, a minimum system buffer pool for each page size is allocated, and performance is sharply reduced.
19. 它还创建了用于存储响应数据的数据缓冲区。
It also creates the data buffer that holds the response data.
20. 存储方面的增长将依赖于缓冲区的大小和其应用到的队列的数量。
The increase in storage depends on the size of the buffers and the number of queues to which it applies.
21. 使用基于结构的IO方法时,RPG将为输入和输出缓冲区创建初始存储空间,并为空指示符映射创建存储空间。
When using the structure based IO method, RPG will create the initial storage for the input and output buffers, along with storage for the null indicator map.
22. 日志缓冲区——在将所有对数据库的更改刷新到磁盘上的日志之前,用来存储这些更改的内存。
Log Buffer - Memory used to store all changes to database before it is flushed to the logs on disk.
23. 而当在单独的内存段中创建F CM缓冲区时,在同一物理节点上的不同逻辑分区的FCM守护进程间的通信将通过共享存储器进行。
When the FCM buffers are created in a separate memory segment, the communication between FCM daemons of different logical partitions on the same physical node occurs through Shared memory.
24. VM初始化过程用一小组跟踪点启动跟踪,这些跟踪点被捕捉到回绕式存储内缓冲区中。
VM initialization starts trace with a small set of trace points that are captured to wrap around in-storage buffers.
25. 要计算最大的缓冲区大小,DB 2、操作系统以及其它任何应用程序都必须考虑其它所有存储器的利用率。
To calculate the maximum buffer size, DB2 considers all other storage utilization, the operating system, and any other applications.
26. 这种统计信息存储在一个循环缓冲区中,DBA可以设置该缓冲区的大小。
The statistical information is stored in a circular buffer, which the DBA can resize.
27. 下面是一些缓冲区,用于存储返回的XML、消息列表和看到的最新ID。
Below that is the buffer to hold the returned XML, the list of messages, and the last ID seen.
28. 这指明了为每个处理器创建的追踪缓冲区的大小,追踪缓冲区用于存储tprof运行过程中生成的追踪信息。
This refers to the size of the trace buffers that are created for each processor to store the trace information that is generated while Tprof is running.
29. 这指明了为每个处理器创建的追踪缓冲区的大小,追踪缓冲区用于存储tprof运行过程中生成的追踪信息。
This refers to the size of the trace buffers that are created for each processor to store the trace information that is generated while Tprof is running.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
