空间曲线用英语怎么说,空间曲线的英文翻译


词语导航

基本信息

词语:空间曲线

繁体:空間曲線

拼音:kōng jiān qū xiàn

英语翻译

【计】 space curve

分词翻译

空间的英语翻译:

airspace; interspace; space; vacuum; void
【化】 space
【医】 keno-; space

曲线的英语翻译:

curve
【医】 curve
【经】 curve

翻译例句

1. 提出一种新的空间曲线匹配算法。

A novel space curve matching algorithm was presented.

2. 如果是空间曲线的话,这就应该多出第三个分量。

If you have a space curve then you will have a third component here.

3. 输送线路可按空间曲线布置。

Conveying line can be arranged according to the curve of space.

4. 平面和空间曲线的运动有着广泛的应用。

The motions of plane and space curve have a wide range of applications.

5. 对于空间曲线上的第二类曲线积分也有类似的公式。

Similar formulae hold for a line integral of the second type taken over a space curve.

6. 还介绍了软件设计中碰到的实际空间曲线的计算方法。

The paper has recommended the calculation methods of space curves in the software design.

7. 文章主要讨论了空间曲线在一般平面上的射影柱面方程的求法。

This paper discusses the solutions of the equations of a class of projective cylinders formed by space curves onto general planes.

8. 论证了两曲面的交线为空间曲线,其方程为一元四次隐函数关系式;

It is proved that the intersecting line of the two curved surface is space curve, and the equation is quartic implicit function with one unknown.

9. 该机螺旋体心轴为可挠曲的,因此输送线路可根据需要按空间曲线布置。

The spiral mandrel is flexible, so the transmission line can be arranged according to the space curve.

10. 研制了一套基于旋转电弧传感的弧焊机器人空间曲线焊缝智能跟踪控制系统。

A space curve welding seam tracking sys-tem on welding robot with rotating arc sensor is devel-oped.

11. 讨论空间曲线的表达和描述方法,提出用矩和傅里叶描述符描述空间曲线的方法。

The expression and description methods of space curve are demonstrated. The methods of using moment, Fourier to describe the space curve is proposed.

12. 由于水平曲率的存在,空间曲线预应力束的摩阻损失与规范计算的结果存在差异。

As the existence of the horizontal curvature, the result of friction loss is different from "standardize".

13. 其二为一种修整的线接触,展成的等螺距齿面与理论轨迹曲面沿某一空间曲线近似相切。

The new tooth surface can be prolonged by the normal profile of the internal toroidal surface, or replaced by an equal pitch helical surface.

14. 提出了一种应用于非开挖管线测量,在已知离散点曲率的情况下进行空间曲线重构的方法。

A reconstruction method of using the discrete curvature data for space curve was proposed on underground pipeline detection.

15. 小范围焊缝模型定义为一条空间曲线,通过控制结构光传感器运动,来获取焊缝的三维信息。

The weld seam is a space curve and it gets information from structured laser sensor by user"s controlling.

16. 通过若干经典算例,说明在工程设计中利用三维技术求解空间距离、空间曲线以及实体惯量的方法。

Through several typical calculating-examples, the methods of solving space distance and curve, and entity inertia by three-dimensional technology in engineering-design field were explained.

17. 结果表明,该方法不仅具有较高的插值精度,而且通用性强,可适用于平面和空间曲线的参数化插值。wWW.wENtiYi.cOm

The computation results show that the presented interpolation approach has better precision and versatility. And it can be used in parametric interpolation both for planar and spacial curves.

18. 对插削等距型面孔的插刀进行了设计,对其平均半径、前角、后角、刀刃的空间曲线作了分析和研究。

The equation of the edge curve of the slotting tool for machining the hole of the isometric profile cylinder (IPC) is developed by the principle of contact of the gears.

19. 据此,推出具有空间曲线的异型截面构件的三维造型数学公式,可供产品设计及绘图软件二次开发使用。

And then the math formulae for three dimensional moulding of a special section member with space curves have been derived which could be used for product design and development of drawing software.

20. 由于弹性杆的中心线或弹性细丝可以抽象成空间曲线,然后根据空间曲线论和微分几何的知识进行处理。

The centerline of elastic rod or elastic filament can be abstracted as space curves to deal with them by the knowledge of the theory of space curve and differential geometry.

21. 莫比乌斯带连接这两个部分,在整个空间曲线中很明显,包括墙壁、天花板衬里和地板都引用了莫比乌斯带。

Linking the two parts, the mobius reference is manifest in the curved lines throughout the space, including the walls, ceiling lining and floor.

22. 特别的,文中给出了证明单项式空间曲线都是集合论完全交的第三种方法,从而简化了这一结论的证明过程。

In particular, the thesis points out that the third method to show that all monomial space curves are set-theoretic complete intersections, thus simplifying the process to come to this conclusion.

23. 其次,本文在前期研究建立的空间曲线啮合方程基础上,结合空间坐标变换,推导出空间曲线啮合轮的啮合轨迹;

Secondly, the meshing path of the contact point of SCMW is deduced based on the meshing function of space curve and the space coordinate transformation.

24. 该算法对离散的曲线进行光顺、拟合和采样,使用空间曲线微分几何性质计算各采样点的曲率和弗朗·内特标架。

After smoothing, fitting and sampling the discrete space curves, the algorithm calculated Frenet frame and curvature for each sampling point.

25. 本文就此进行了讨论,对有弧长约束的空间曲线及有面积约束的旋转曲面问题,分别给出了相应的算法及误差估计。

In this paper, this constraint is discussed. For the space curve with length constraint and the surface of revolution area constraint, algorithms and estimation of the error are given.

26. 本文介绍了一种空间曲线轨迹的铣削加工方法,适用于加工各种圆柱面上的空间圆形、椭圆形,以及一些其它形式的曲线轨迹。

A milling method of curves in space is introduced in the paper, which can be applied to the processing of space circular, elliptic and other curves on various cylinders.

27. 本文以实际的工程项目为背景,针对船舶建造工业中常遇到的空间曲线切割问题,设计了此四自由度机器人,用于圆管端头切割。

With the background of practical projects, aiming at cutting problem of space curve in shipbuilding industry, four axis robot system is designed. And it is used to cut the ends of the steel tubes.

28. 本文提出了一种适用于一般空间曲线、曲面数控加工的离线插补原理,并探讨了书这一原理应用于主从式数控系统的理论和实战问题。

This paper introduces a theory based on off-line interpolation suitable for NC machining to generate curved line or face, with a primary-secondary computer NC system.

29. 本文提出了一种适用于一般空间曲线、曲面数控加工的离线插补原理,并探讨了书这一原理应用于主从式数控系统的理论和实战问题。

This paper introduces a theory based on off-line interpolation suitable for NC machining to generate curved line or face, with a primary-secondary computer NC system.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!