
词语导航
基本信息
词语:胶膜
繁体:膠膜
拼音:jiāo mó
英语翻译
【化】 rubber film
相关词条
1.adhesivefilm 2.pliofilm 3.filmadhesive分词翻译
胶的英语翻译:
glue; gluey; mucus; pastern; sticky【医】 gloea; glue
膜的英语翻译:
film; membrane; theca; velamen; velum【化】 membrane
【医】 coat; envelope; film; lemma; membranae membranae; membranae membrane
panniculus; theca; thecae; tunic; tunica; velamen; velamenta
velamentum
翻译例句
1. 可能没有一套橡胶膜制成的蝙蝠侠衣服,也没有一个可靠的管家。
There may not be a rubber-nipple-equipped Batsuit, nor a trusty butler.
2. 通过循环伏安法合成聚苯胶膜电极。
Polyaniline film electrode was synthesised by cyclic voltammogram.
3. 橡胶膜贮存有电荷,遇到外力时电荷量改变。
The rubber stores an electrical charge, and when it is compressed, the amount of charge is changed.
4. 穿好胶膜后用胶布将胶膜牢牢的贴在收料纸管上。
Use the adhesive plaster to connect the film and paper pipe tightly after fixing.
5. 我司生产的热熔胶形态包括:胶膜、胶粉、胶粒。
Our production of hot melt adhesive patterns include: film, powder, particles.
6. 脱胶膜,是烤版的温度和时间不够,胶膜薄所致。
De-rubber film, a version of temperature and time thin enough, and cutan.
7. 考察了有机硅含量对胶膜耐水性和力学性能的影响。
The influences of AEAPS contents on water resistant and mechanical properties of the polyurethane films were investigated.
8. 利用辐射接枝改性技术,制备了医用硅橡胶水凝胶膜。
Grafting hydrogels onto silicone rubber membranes were prepared by radiation technique for medical application.
9. 稳定的制膜液是制备出完整、无缺陷溶胶膜的首要条件。
Suspension stability is the primary factor to prepare integrated membrane without defect.
10. 研究结果表明该菌所产凝胶膜的主要成分是细菌纤维素。
The findings indicated that the principal constituent of this strain producing gelatinous membrane is bacterial cellulose.
11. 目的观察硅凝胶膜对增生性瘢痕的影响,探索其作用机制。
Objective To investigate the effects and mechanism of silicone gel sheeting on hypertrophic scar.
12. 对二甲醚与瓶装lpg调压器用橡胶膜片的相容性进行研究。
The consistency between dimethyl ether and rubber diaphragm in bottled LPG regulator is studied.
13. 胶膜的AT R红外光谱表现为水性聚氨酯典型的红外特征。
The ATR IR spectrum of the membrane was demonstrated to be that typical to waterborne polyurethanes.
14. 通过疲劳实验,观察燃油压力调节器中橡胶膜片受腐蚀的情况。
The corrosive thing of rubber film is observed in fuel press adjuster.
15. 四氟乙烯隔膜由橡胶膜片加固,保证了灵活性,增加了使用寿命。
The PTFE diaphragm is backed with an elastomeric diaphragm to enhance flexibility and improve longevity.
16. 硬段含量提高,胶膜硬度增加,拉伸强度增加,胶膜耐水性降低。
An increase of the content of hard segmer will increase film hardness and elongation strength, and lower water resistance.
17. 对制得的聚氨酯胶膜进行了红外分析、DSC测试和形状记忆性能测试;
The properties of polyurethane film were studied by using IR, DSC, and its shape memory properties were studied.
18. 目的对交联透明质酸衍生物制备的载药水凝胶膜进行体外药物释放研究。
OBJECTIVE To evaluate drug release properties in vitro of the hydrogel films made of cross-linked hyaluronic acid derivatives.WWw.WEnTiYi.COM
19. 分析了橡胶膜密封储气罐及曼型稀油密封储气罐用于高炉煤气储存的性能比较。
This paper analyses the function and characteristic of M. A. N gasholder and flexible seal gasholder in blast furnace gas storage.
20. 通过这种方法制备的改性胶乳的硫化胶乳胶膜具有优良的物理性能和热力学性能。
The results showed that the obtained films of modified latex provided excellent physical properties, dynamic properties and thermal stability.
21. 实验结果显示,PEO接枝水凝胶膜的凝胶分数主要依赖于辐射剂量和聚合物浓度。
The experimental results showed that gel fraction of the PEO graft hydrogel films depended mainly on irradiation dose and concentration of the polymers.
22. 本研究基于细胞生长更新和产物原位分离的概念设计了细胞循环硅橡胶膜生物反应器。
A silicone membrane bioreactor with cell recycling was constructed based on concepts of cell regeneration and product separation in situ.
23. 还需要致使留心的是,全部翻开的边沿应封上恰当的胶膜防止水、尘土或其它杂质侵入。
Also need the attention, all opened the seal the edge should be of the appropriate film to prevent water, dust, or other intrusion.
24. 这种油漆包括涂料,它的特性受合成的树脂影响很大。并且塑胶膜也可以被层压在钢带上。
These finishes include paints, whose properties are strongly influenced by the resins used in the formulation, and plastic films that may be laminated to the metal strip.
25. 主要集中在以明胶膜和醋酸纤维素为载体的固定化脲酶及无载体的交联脲酶聚集体固定化脲酶。
Concentrate on glutin and cellulose acetate as carrier to immobilization and cross-linked urease congeries to immobilization, which have no carrier.
26. 新鲜人硬脑膜的柔度最小,冻干人硬脑膜、新鲜人颅骨膜、硅橡胶膜、涤纶片的柔度依次增大。
Fresh human dura is the least compliant and then in increasing order are lyophilized human dura, fresh human pericranium, Terylene and silicon membranes.
27. 探讨了乳化剂种类和用量、聚合温度及加料方式对乳胶粒大小、胶乳稳定性和胶膜耐水性的影响。
Effects of emulsifier types and amounts, polymerization temperature and feed methods on particle size, stability of latex and water proofing property of films were investigated.
28. 探讨了乳化剂种类和用量、聚合温度及加料方式对乳胶粒大小、胶乳稳定性和胶膜耐水性的影响。
Effects of emulsifier types and amounts, polymerization temperature and feed methods on particle size, stability of latex and water proofing property of films were investigated.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
