铸器用英语怎么说,铸器的英文翻译


词语导航

基本信息

词语:铸器

繁体:鑄器

拼音:zhù qì

英语翻译

【医】 casting machine

分词翻译

铸的英语翻译:

casting; founding

器的英语翻译:

implement; organ; utensil; ware
【医】 apparatus; appliance; crgan; device; organa; organon; organum; vessel

翻译例句

1. 学问便是铸器的工具,抛弃了学问便是毁了你自己。

Knowledge is the tool for casting. If you give up the pursuit of learning, you may ruin yourself.

2. 易卜生说:“你的最大责任是把你这块材料铸造成器。”学问便是铸器的工具。抛弃了学问便是毁了你们自己。

Henrik Ibsen says, "It is your supreme duty to cast yourself into a useful implement." learning is the casting mould. Forsake learning, and you will ruin yourself.

3. 本文应用水力学及数学模型的方法研究了超低头板坯连铸结晶器内钢水流动特征。

This paper studied liquid steel flow property in mould of super low head slab CC with hydraulic model and mathematics model.

4. 在分析攀钢大方坯连铸现行结晶器冷却能力的基础上,优化调整了结晶器冷却制度。

The existing cooling ability of bloom continuous casting mold at PZH Steel was evaluated, then, the mold cooling process was optimized.

5. 针对电磁铸轧系统中的电加热炉,采用了EPEC3g系列微处理器建立了电加热炉恒流量控制系统。

Constructed a control system of the electric stove with constant flow based on EPEC 3g microprocessor for the electric stove in the electromagnetic roll-casting system.

6. 本文介绍了LB-352液位计在连铸结晶器钢水液位测量与自动控制中的应用。WWw.wEnTiYi.Com

This article presents the application of LB - 352 level detector in measuring and automatic controlling steel level in mold in continuous casting machine.

7. 电磁场快速铸轧技术中的核心部件—电磁感应器和辊套在铸轧过程中起关键作用。

Inductor and roller shells which play an important role in the course of roll-casting are the key parts of the technology of high speed electromagnetic roll-casting.

8. 使用这种结晶器后,连铸的产量及铸坯质量大大提高。

The results used the mould show that the quality and volume of production of cast billet were greatly improved.

9. 电机散热应该通过热传导流体的循环流动来完成,这些流体从一体式贮存器流经内铸管道,进入电机定子外壳。

Motor heat dissipation shall be accomplished by circulating a heat transfer fluid from an integral reservoir through channels that are internally cast into the motor stator housing.

10. 结晶器振动装置的运动精度对铸坯的表面质量有很大影响。

The movement locus precision of mould oscillation equipment does much influence on strand surface quality.

11. 钙处理不当时不仅影响钢水的浇铸性能,而且还会影响钢水在连铸结晶器内的凝固行为。

Improper calcium treatment will not only affect the casting properties, but also affect the solidification process of molten steel in mould.

12. 介绍了一种在钢铁连铸结晶器连续液位仪上使用的BGO闪烁体探测器电路的设计。

Introduced BGO scintillator detector electric circuit design which used in the Continuous metal cast crystallizer in the steel and iron company.

13. 计算表明,电磁制动对于抑制涡旋、改善薄板坯连铸结晶器中的流场有明显效果。

It showed that EMBR could control vortex and improve the flow field in the thin slab continuous casting mould effetely.

14. 应用流场计算软件PHOENICS及水力模型,模拟了方坯连铸结晶器内钢液的流场和流动分布。

Using flow field software PHOENICS and water model, this paper describes the flow field of molten steel in continuous casting billet mold.

15. 讨论了钢包、中间包及连铸结晶器所用渣相对夹杂物的吸附,对钢水的氧化,以及保护浇注的效果。

Absorption of inclusions to slag, steel reoxidation by slag, and protective effect of the slag at ladle, continuous tundish and nold are discussed.

16. 本文用一段录像显示一个带有一定锥度的薄板坯连铸结晶器内的钢液流动在使用了电磁制动后是如何受到影响并逐渐减弱的。

A video will be presented showing how steel flow in a thin slab caster with a tapered mold is influenced and calmed down when using the EMBR.

17. 介绍了连铸拉矫机变频器装置之间负载平衡的计算、控制和实现方法。

The calculation, control and realization method of load balance between inverters on the straightener of continuous caster are presented.

18. 本文采用不可压缩MHD方程及零方程湍流模式,数值计算了加电磁制动器的二维薄板坯连铸结晶器中的流场。

Using incompressible MHD equations and zero equation turbulent model, the paper calculated the flow field in two dimension thin slab continuous casting mould with the electromagnetic brake(EMBR).

19. 结果表明,矩形软接触电磁连铸结晶器角部存在明显的磁场叠加现象;

The results show that the electromagnetic flux overlap aooears distinctly at the corner of rectangular soft-contact mold.

20. 从梅山钢铁公司连铸结晶器现场的压力和流量检测的需求出发,对压力和流量检测问题进行了研究。

Pressure and flow measurement is studied with the requirement of the field pressure and flow measurement in the continuous casting mould in Meishan Iron and Steel Corporation Ltd.

21. 采用水模实验以及电脑影像技术,对连铸结晶器内钢液弯月面进行了模拟研究,对不同工艺条件下的钢液弯月面进行了数值模拟。

The simulation study for crescent-moon surface of molten steel in mold is conducted with water simulating experiment and computer video according to different process conditions.

22. 连铸坯与结晶器间摩擦力是反映铸坯表面质量、优化工艺参数和进行拉漏预报的有效参数。

The friction between billet and mold is an effective parameter reflecting billet surface quality, optimizing technologic parameters and predicting breaking out.

23. 尝试性地将基于主元分析的多变量统计方法应用于连铸结晶器过程的监测。

The authors try to use multivariate statistics method based on principal component analysis (PCA) to monitor continuous casting mould process.

24. 通过对连铸结晶器保护渣渣圈形成原因的剖析,结合生产实际分析并讨论了影响渣圈形成的因素及对保护渣使用性能的影响。

This paper analyzes the cause of formation of the slag-ring in the crystallizer and discusses the influencing factor of forming the slag-ring and effects on the functional performance of the powder.

25. 剖析了连铸结晶器粘结性漏钢的基本特征,利用热电偶,提出一种新的漏钢诊断预报模型。

The basic feature cohesiveness steel leakage of crystallizer in continuos casting process is analyzed. By using thermocouples, a new model of steel leakage diagnosis forecast is stated.

26. 对连铸过程结晶器液面控制提出一种新的模糊控制方法。

A new kind of fuzzy control is proposed for mold level control in continuous casting process.

27. 本文介绍了一种铝带坯铸轧机结晶器液位控制用气动装置的工作原理及应用效果。

This paper introduces a pneumatic device controlling metal level of the mound in an aluminum strip. caster, and describes its working principle and application effect.

28. 介绍了连铸结晶器液位控制系统中FUZZYPID的设计和应用。

The design and application of FUZZY PID in level control of continuous casting crystallizer are introduced.

29. 本文对连铸小方坯结晶器的设计和操作参数作了一些说明。

This paper gave some remarks to the design and operational parameters of billet continuous caster mould.

30. 本文对连铸小方坯结晶器的设计和操作参数作了一些说明。

This paper gave some remarks to the design and operational parameters of billet continuous caster mould.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!