
词语导航
基本信息
词语:活塞头
繁体:活塞頭
拼音:huó sāi tóu
英语翻译
【机】 piston head
相关词条
1.pistonhead 2.cylinderhead分词翻译
活的英语翻译:
alive; exactly; live; product; vivid; work【医】 vivi-
塞头的英语翻译:
【机】 stopper end翻译例句
1. 检查和更换活塞头的O型圈。
Check and replace the O-ring of the piston head.
2. 活塞头、缸头和连杆拆除;
Remove cylinder head & piston, and con-rod;
3. 所述凸台全部置于所述活塞头右端的环状槽内。
The lug boss is completely arranged in an annular groove at the right end of the piston head.
4. 检查活塞头o型圈是否有粘性,使得活塞头堵死。
Check that the piston head is blocked due to the stickiness of the O-ring on it.
5. 应彻底清洗所有和物料接触的部件,包括活塞缸、活塞头、O型圈、单向阀、灌装头、料桶、料斗等,发现破裂损伤的密封应及时进行更换。
Thoroughly clean all parts exposed to material, including piston barrel, piston head, O-ring, one-way valve, filling head, feeding tank, hopper, etc. Damaged seal shall be immediately replaced.
6. 在十字头型发动机中,活塞连接在一根垂直的活塞杆上,活塞杆的下端又连接在一个叫做十字头的滑动构件上,十字头在导轨中上下滑动。
In crosshead-type engines, the piston fastens to a vertical piston rod whose lower end is attached to a sliding member called a crosshead, which slides up an down in guides.
7. 对阀盘、耳轴活塞杆头的染料渗透剂测试。
Dye-penetrant testing of the disc trunnions and piston rod heads.
8. 在打击活塞(3)上结合螺丝批头(4)。
A striking piston (3) is connected to a driver bit (4).
9. 由压缩机的结构和工作原理可知,压缩机的振动信号基本上都是非平稳信号,如气阀,十字头、活塞等振动信号。
The vibration signals of reciprocating compressor are basically non-balanced from its configuration and work principle, such as the vibration signals of air-valve, crosshead and piston.
10. 配置有高强度烤漆钢板水箱,SUS304不锈钢活塞杆及双头均可活动的高压管。
Equipped with the steel water tank which is of high strength baking finish, stainless steel plunger (SUS304) and pressure pipe with two moveable ends.
11. 分析了活塞杆与铲头碰撞点的选择方法和氮气室的初始压力和初始容积的确定方法。
Analyse choice method of collision point of cylinder and shovel head and confirm initial pressure and volume of nitrogen chamber.
12. 密闭取心工具主要由外螺纹接头、平衡活塞、限位接头、内外筒、卡箍岩心爪、定位销、密封头、及取心钻头等部件组成。
Sealing coring tools mainly consists of external threaded adapter, balance piston, limit joint, inner and outer barrel, core catcher, locating pin, sealing head and coring bit.
13. 根据需要,密封头采用锥形活塞或球体。
The seal head adopts a conic piston or a ball to meet the need.
14. 活塞杆运行时严禁向送料口伸入头手或送料。
Avoid put hands or head into the feed port when the piston rod is running.
15. 本机为L型、两列、两级、双作用、水冷、有十字头的固定式往复活塞空气压缩机。
This machine is of LV model, double-row, double-step, double function, water-cooling, and intercrossing, fixed, no basic reciprocating piston type air compressor.
16. 一种新十字头连接结构,由活塞杆、球面垫圈、十字头、十字头销和连杆组成。WWW.WeNtiYi.COm
The utility model relates to a novel crosshead connecting structure which is composed of a cylinder rod, a spherical washer, a crosshead, a cross pin and a connecting rod;
17. 一种新十字头连接结构,由活塞杆、球面垫圈、十字头、十字头销和连杆组成。
The utility model relates to a novel crosshead connecting structure which is composed of a cylinder rod, a spherical washer, a crosshead, a cross pin and a connecting rod;
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
