热压用英语怎么说，热压的英文翻译

词语导航

基本信息

词语：热压

繁体：熱壓

拼音：rè yā

英语翻译

【计】 hot-press
【化】 hot-pressing

相关词条

1.hotpress  2.heatpressure  3.hotcompression  4.hotextrusion  5.hot-pressed  6.hot-press(ing)  7.hot-pressing  

分词翻译

热的英语翻译：

ardent; caloric; craze; eager; fever; heat; hot; warm
【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-

压的英语翻译：

intimidate; keep under control; press; push down; shelve; suppress
【医】 prelum; pressure

翻译例句

1. 研发出了两个横梁和一个水平成型模具，实现了热压三通支管高度的增加。

Developed excogitates of two decumbence and one horizontal molding die realized the increasing height of branch pipe of heat pressure tee.

2. 绝热压缩，的情况，与此相反。

In the opposite case, if you have a compression, then it"s the opposite of expansion.

3. 有些人面对来自热压的其它危险。

Some people face an increased danger from heat stress.

4. 而且，在热压过程中没有新相生成。

The results showed that no new phase is generated in the hot rolling .

5. 描述了热压预缩机的应用范围和作用。

The range of application and effect of compacting calenders are described.

6. 本厂拥有国内先进的热压板生产流水线。

Our factory has domestic and advanced hot pressing plate production lines.

7. 然后在热压机中压制两分钟，形成平板。

It is then pressed in a heat press for two minutes into a flat sheet.

8. 热锻、滚轧、热压等等。

Hot forging rolling extrusion etc.

9. 然后有另外一个绝热过程，绝热压缩到4点。

Then we"re going to have another isothermal step, a compression to some point four.

10. 产品铺装完成后，及时进入预压及热压工序。

After the completion of product pavement, the product will enter into the pre-pressing and heat pressing working procedure.

11. 所有的sigma板经热压处理从而成为稳定产品。

All SIGMA boards are autoclaved to become stable product.

12. 塑料卡，塑料卡制造方法，用于热压的板和制卡装置。WWW.wEnTiyI.Com

Plastic card, plastic card producing method, hot press plate, and car producing device.

13. 预估及预防在热处理过程中因热压释放导致的产品变形。

Consider and prevent the product deformation caused by thermal stress release in the process of heat treatment.

14. 风压，迎风面，背风面，上风，静压，动压，全压，热压。

Wind pressure, against the wind, leeward, windward, static pressure, dynamic pressure, overall pressure, thermal pressure.

15. 热压测试跟竣工：10%的劳动量和100%的累计劳动量。

Hydrotested and Complete: 10% of work and 100% of cumulative work.

16. 加热压床夹具的设备，具有这种设备的压床，以及制造方法。

Device for heating a press tool, press having such device, and method of manufacture.

17. 同时晶须取向也影响复合材料的热压缩应力-应变曲线的形状。

Meanwhile, the whisker orientation affects the shapes of the stress strain curves of the composites.

18. 对煤料的热压成型过程进行了分析，提出了改进挤压设备的途径。

This paper analyses the process of coal hot briquetting and points out the way to improve squeeer.

19. 该研究结果将为热压成型过程中气泡运动模型的建立提供实验依据。

These results will provide experimental bases for the establishment of bubble movement model in hot-compaction process.

20. 热压机是人造板生产的关键设备，液压系统是热压机的重要组成部分。

The key equipment of wood-based panel production is hotpress, the important component of which is hydraulic system.

21. 目的：研究国产陶瓷表面离子交换处理对热压铸瓷冠抗碎裂载荷的影响。

PURPOSE: To study the effect of ion-exchange treatment on the fracture resistance of hot pressable ceramic crown.

22. 当迅速开启在高压气源和低压气流回路之间的阀门时，会发生绝热压缩。

This can occur when a valve between a high-pressure gas source and a low-pressure flow circuit is opened quickly.

23. 这种材料是采用热压制和机械压制进行整体结合后形成的实心同质面板。

Material is integrally-bonded to form a solid homogenous panel with thermal and mechanically-applied pressure.

24. 热压烧结可以缩短烧结时间，有利于获得晶粒保持纳米尺度的烧结体材料。

Hot pressed sintering can shorten sintering time and be beneficial to attain nano grain size sintering materials.

25. 并且可为用户设计制造各种规格的热压板，也可代为维修各种规格的热压板。

And the user can design and manufacture of a variety of pressing plate, but also took the maintenance of a variety of pressing plate.

26. 竹材热压干燥过程中的水分移动，主要受温度梯度和含水率梯度的共同作用。

The moisture movement was mainly controlled by both temperature gradient and moisture gradient.

27. 座、背板：采用优质橡木经模具热压成型，经仿形打磨工序、做多层油漆饰面。

Block, backplane: high-quality oak molding by the mold pressing, grinding process by profiling, do the multi-layer paint finishes.

28. 试验验证表明，该传热传质模型基本能反映竹材在热压干燥过程中的传热传质规律。

The verification experiment of the model indicated that the model could approximately reflected the law of heat transmission and water transfers during the dryingprocess.

29. 试验验证表明，该传热传质模型基本能反映竹材在热压干燥过程中的传热传质规律。

The verification experiment of the model indicated that the model could approximately reflected the law of heat transmission and water transfers during the dryingprocess.