油孔用英语怎么说,油孔的英文翻译


词语导航

基本信息

词语:油孔

繁体:油孔

拼音:yóu kǒng

英语翻译

【化】 oil hole

分词翻译

油的英语翻译:

paint; fat; grease; oil
【化】 oil
【医】 elaeo-; eleo-; oil; Ol; olea; oleo-; oleum

孔的英语翻译:

aperture; bore; foramen; hole; os; ostium; vulva
【化】 hole; opening
【医】 apertura; aperturae; aperture; bore; coel-; foramen; foramina; hiatus
mesh; opening; pore; Pori; porosity; porus; trema

翻译例句

1. 汽车加油时每打开加油孔,就会有汽油挥发。

Avoid small fuel fills – Fuel evaporates every time you open the fuel cap.

2. 注意气分内回油孔尺寸,还有气分的设计容积。

Pay attention to their fair share of oil gas hole size, and the design of the gas points capacity.

3. 利用定油孔起落架的落震试验对该模型进行了校验。

The model is verified by the drop tests of fixed orifice landing gear.

4. 气缸体斜油孔加工对准系统为实现上述方法的装置。

The air cylinder body inclined oil hole machining alignment system is a device for realizing the method.

5. 介绍了油孔螺塞拼接式热锻模具的设计及其应用效果。

Finally the design and application achievement of this hot forging die are described.

6. 注油孔为设在电机轴侧面的凹槽形或平面形注油孔。

The oil injection hole is a concave channel shape or planar oil injection hole which is arranged on the side surface of the motor shaft.

7. 本发明公开了一种气缸体斜油孔的加工方法及对准系统。

The invention discloses a machining method and an aligning system for an inclined oil hole of an air cylinder body.

8. 标准型抽油泵柱塞上阀罩的工作缺陷是出油孔壁磨损断裂。

The shortcoming of top valve housing for standard type oil well pump plunger is wear and rupture of oil flow pore wall.

9. 是否完好、油孔是否堵塞、浮子是否粘连、清洗调节器的浮子孔。

Whether the oil hole plug, Whether the float adhesion, you can also clean the regulator float hole.

10. 或为设在电机壳体侧壁或端面上对应于轴承部位的圆形或方形注油孔。

Alternatively, the oil injection hole is the round or square oil injection hole which is arranged at the positions of the side wall or end surface of the motor shell corresponding to the bearing.

11. 油孔附近的油束上边缘处具有合适的燃料浓度和较高的温度,最先发生自燃;

The upper edge of spray near the nozzle would ignite first for its appropriate fuel concentration and higher temperature.

12. 主要介绍在加工发动机曲轴斜油孔时,用解析法计算曲轴装夹时所倾斜的角度。

This article introduces mainly calculation of a slanting Angle of crankshaft clamping with the analysis method in machining crankshaft oblique oil hole.

13. 为了满足安装的要求,对国产齿轮泵的旋向、内油孔位置和花键轴等进行了改造。

The revolving direction, internal oil hole position and spline shaft of the domestic pump are modified to meet the installation requirement.

14. 量油孔分带锁式和脚踏式,安装于油罐顶部,用于测量管内油品的标高和温度及取样等。

The oil hole zoning and pedal locks, set on the tank tops, used for measuring the elevation and oil tube temperature and sampling, etc.

15. 一种大型洗衣机主轴的密封装置,它是由支承装置、密封介质、注油孔、密封件等组成;

The utility model provides a main shaft sealing device for a large-size washing machine, comprising a supporting device, sealing medium, an oil feeding hole, a sealing element, etc.

16. 针对加工六缸曲轴主轴颈孔、连杆颈直油孔的需要而设计的卧式双面多工位数控钻削组机。

Horizontal double sided NC combined drilling machine is specially designed for the machining of main shaft journal hole and crank arm journal straight oil hole of crankshaft with six cylinders.

17. 抽油杆与控制器组成的控制杆柱下入到丢手管柱内,控制杆柱上部与杆式泵的进油孔相连。

The control rod string which is consisted of pumping rod and controller is tripped into the release string.

18. 当泄油孔数达到一定值后 ,泄油孔长度较短的油井与较长油井的预测产量比值为一常数 ;

The results show that crude production rate is increased as more length of drain holes is drilled.

19. 应注意,带上油孔的摇臂轴座是摇臂的前端,装配时应注意以这一端和缸盖摇臂轴上油孔对齐。

Note that the rocker arm shaft supporting seat with upper oil hole is at front end of the rocker arm and this end should align with upper oil hole on cylinder head rocker arm shaft when assembling.

20. 通过对轴承钻油孔夹具结构的改进,使钻油孔夹具内径与外径定位兼备,扩大使用范围,降低制造成本。WwW.wENTIYi.cOM

The fixture used for oil hole drilling has both ID and od location by improving the structure of the fixture, so as to expand application scope and reduce production cost.

21. 在换润滑脂时应用洁净的汽油或煤油仔细清洗滚柱轴承的滚道等部位,清洗时应打开轴承座下的放油孔。

Use position, such as one, etc. Of rolling that clean petrol or kerosene wash the roller bearing carefully while changing the lubricating grease, should open to put the oil-hole pedestal when washing.

22. 在测量油膜轴承锥套内部圆度误差过程中,由于内表面有许多油槽和油孔,测量过程中产生了大量无效数据。

In the roundness error measurement of inside sections of the oil film bearing, because of the oil slots and the oil holes, a large amount of invalid data can be brought.

23. 本实用新型可防止抽油泵在采油过程中上排出阀罩出油孔筋柱裂断,提高抽油泵的使用寿命,降低采油成本。

The utility model can prevent the discharge-orifice steel columns of the upper draining valve cover from cracking, increase the service life of oil-well pumps, and lower oil-production cost.

24. 本例活塞特殊的回油孔结构特征对有限元分析结果产生了巨大的影响,因此不能简单地简化掉这一细微结构进行有限元分析。

It shows that features oil return holes is also important and have great impact on fea results, so it is sensed that any simple simplify should not be done in modeling in fea.

25. 本例活塞特殊的回油孔结构特征对有限元分析结果产生了巨大的影响,因此不能简单地简化掉这一细微结构进行有限元分析。

It shows that features oil return holes is also important and have great impact on fea results, so it is sensed that any simple simplify should not be done in modeling in fea.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!