设计因数用英语怎么说，设计因数的英文翻译

词语导航

基本信息

词语：设计因数

繁体：設計因數

拼音：shè jì yīn shù

英语翻译

【经】 design factor

分词翻译

设计的英语翻译：

design; devise; contrive; project; engineer; frame; plan; programming; scheme
【化】 design
【医】 project
【经】 projectionwWw.WeNTIYi.cOM

因数的英语翻译：

factor
【电】 factor

翻译例句

1. 研究团队以身高、体重及行走距离为因数设计了一个计算步行能量消耗的方程序。

The team produced an equation to calculate the energetic cost of walking that will factor in your height, weight and distance walked.

2. 仿真结果表明，DSP控制器可以获得较高的功率因数，且具有快速的电路动态响应、灵活的控制方法以及简洁的硬件设计等特点。

The simulation result shows that the DSP controller has very fast dynamic response and unity power factor, flexible control and simplified hardware design.

3. 由多口井数据的统计计算和分析，可得某一油田或区块的水平井设计轨道各井段的摩阻因数放大因数。

Modified factor of frictional coefficient of different sections of designed path of one field or area is obtained by statistical computing and analysis of more Wells.

4. 本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。

In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.

5. 这些方法经实际应用的检验，被证实是可行的，对功率因数自动补偿设备的设计、调整有一定的指导意义。

These methods have been proved to be feasible by the tests of practical USES, and they have certain guiding significance for the design and adjustment of power factor automatic compensate equipments.

6. 介绍一种以邓8031单片机为核心构成的功率因数自动补偿控制器的工作原理、测控硬件电路及测控软件的设计。

This paper introduces the theory of operation, measurement and control circuit design, software design of a power factor automated compensator, which is mainly designed with 8031 micro - controller.

7. 详细分析了CIC-CPPFC电子镇流器的工作原理、 单位功率因数的条件和参数设计。

The operation principle, unite power factor and parameters designing of CIC-CPPFC electronic ballast are explained in detail.

8. 而变频调速电机的设计重点是在调速范围内的效率、功率因数、温升，以及动态响应性能等。

But the emphases of the design for an inverter-driven induction motor are the efficiency, power factor, elevated temperature in the variable speed range, and dynamic response.

9. 设计了可进行静摩擦因数测定的实验装置。

In this paper, an experimental device for measuring the static coefficient of friction was designed.

10. 建立了对基于电压空间矢量pwm的三相高功率因数整流器实现电流稳态无差拍控制的设计准则。

Set up the circuit design criterion for the steady - stage deadbeat control to the line current of a three - phase high-power-factor rectifier based on voltage space-vector PWM.

11. 设计工程中忽略中压网络、牵引机组对功率因数的影响。

In design process, however, the influence of medium voltage supply network and traction unit on power factor is often ignored.

12. 功率因数校正(PFC)是电源设计中的关键内容之一。

PFC is one of the key points in the design of power supply.

13. 分析了该电路的基本工作原理、关键参数的设计计算，仿真结果表明这种新型的单级大功率开关电源功率因数可达到0 . 995。

Moreover, its operation process principles and critical parameters are analyzed, its simulation results proved that the novel single stage high power switch source"s power factor can achieve 0.995.

14. 试验结果表明，本文提出的设计方法能有效地提高电网的功率因数，因此其具有广泛的应用前景。

The result of testing indicates that the design method can be used effectually to the improve the power coefficient of the electric power system. So it can be widely used.

15. 本文设计出一款高功率因数、高效率、低性能-价格比的开关电源，为32寸LCD电视作稳压电源用。

This paper attempts to design a novel switching power supply with high power factor, high efficiency and low cost performance, to providing the power supply to LCD TV of 32 inch.

16. 设计了用于电流输入连续型电荷泵功率因数校正电子镇流器的调频电路，以减小电路的峰值系数。

Have designed the frequency modulation circuit in the CIC-CPPFC electronic ballast circuit, which would decrease the crest factor of circuit.

17. 本文主要介绍数字钳形功率因数表的设计原理以及实际电路的设计。

This paper presents design theory of digital clamp-shape power factors and applicable circuit.

18. 介绍一种以8031单片机为核心而构成的功率因数自动补偿控制器的工作原理及硬件电路设计、软件设计。

The paper introduced the work principle, hardware circuit design and software design of a power factor automated compensator composed mainly of 8031 single chip computer.

19. 以PSPICE通用电路分析软件在高功率因数电子镇流器设计中的应用为例，分析了计算机辅助分析软件在工程应用中的作用。

The paper discusses the action of computer aided analysis program in the research on high power factor electronic ballast by using PSPICE.

20. 在设计中考虑了安全因数，实现了无障碍设计与关爱性设计。

Considering security factors, the researcher achieves an obstacle-free caring design in the project.

21. 分析了硅橡胶硫化过程的主要影响因数，设计了硅橡胶模具硫化工艺规范的优化系统。

Analyzed the main affecting factors of silicon rubber during the curing period, designed the optimizing system of curing criterion for the silicon rubber mold.

22. 因此，合理设计滤波器，可使牵引变电站的功率因数及谐波同时满足要求。

Hence, a filter could be designed to increase power factor of traction substation and decrease the harmonic currents.

23. 分析了有源功率因数校正电路的工作原理，详细介绍了关键电路参数设计方法，并给出了设计实例。

The operation principle of APFC circuit is analysed, the design method of the key circuit parameter is particularly introduced, and a design example is also given.

24. 通过此关系，设计了基于恒功率因数的节能型异步电动机矢量控制系统。

According to this relationship, vector control system with energy-saving based on constant power factor was formed.

25. 本文设计了一种适用于中大功率、便携式逆变焊机，具有电源输入侧功率因数高，主功率器件实现软开关等特点。

In this paper, a multifunctional welding machine is designed with the characters of high power factor, soft switching and portable remove.

26. 电机功率因数的提高，定子侧的无功功率逐渐下降，从而达到了节能降耗的设计目标。

With the elevation of the power factor, reactive power on stator descends gradually, so the aim of saving energy and reducing wastage can come true.

27. 对该功率因数校正电路进行了分析和设计，试验结果表明，该直流电源电路达到了很高的功率因数。

This paper analyse and design the boost PFC, the experiment result show that DC circuit attain high high power factor.

28. 分析了交错并联功率因数校正电路的工作原理，并进行了建模分析及控制电路的设计。

The working principle of interleaving PFC converters is analyzed, small-signal model analysis is conducted, and control circuits are designed.

29. 分析了交错并联功率因数校正电路的工作原理，并进行了建模分析及控制电路的设计。

The working principle of interleaving PFC converters is analyzed, small-signal model analysis is conducted, and control circuits are designed.