词语导航
基本信息
词语：复合断裂
繁体：復合斷裂
拼音：fù hé duàn liè
英语翻译
【化】 combined rupture
分词翻译
复合的英语翻译：
complex; composite; compound
【化】 recombination
【医】 combination; recombination
【经】 compound
断裂的英语翻译：
part; rupture
【计】 break-away; breakout
【化】 breakage; cracking; failure breaking; fracture
【医】 fragmentation
翻译例句
1. 当材料断裂，荚囊就会打开并释放出修复介体，介体变成实体的复合物填补裂缝从而恢复材料的特性。
When the polymer cracks, the capsules break open and release the healing agent, which becomes polymer solid and seals the crack and restores the material"s properties.
2. 在复合纱线反向加捻的情况下，通过试验分析了复合纱线断裂强力、断裂伸长率与单纱捻度、复合纱线捻度之间的关系。
With twist-against-twist composite yarn, the correlation between breaking strength, breaking elongation ratio and twist of single yarn, twist of composite yarn are analyzed.
3. 应用传统强度理论和细观力学方法对几种韧性材料在复合载荷条件下的断裂机理、启裂位置、开裂方向进行了实验分析和应力场计算。
In this paper, fracture mechanism, position and direction of crack initiation of mixed mode fracture in several ductile materials are tested, and stress distributions of which are analyzed.
4. 寿命经过4个大循环单元后，铅基合金腐蚀断裂，而复合钛拉网板栅仍然完好，没有明显腐蚀，只是活性物质有些脱落。
After 4 cycles, the Pbbased alloy grid is broken whereas the composite ti expand grid is in good condition and has no obvious corrosion except the little shedding of active material.
5. 复合材料常温和高温的拉伸断裂模式与基体相的形变强化特性有关。
The rupture mode of the composite at room and elevated temperature depends upon the work-hardening characteristics of the nickel alloy matrix.
6. 用权函数方法对中心裂纹巴西试样的对径加载作了-复合型断裂分析。
The mixed mode fracture of center cracked Brazilian disk specimen subjected to diametral compression is analysed by weight function method.
7. 本文的研究工作，为平面断裂力学特别是复合材料平面断裂力学的研究提供了一条新的有效途径。
Therefore, a new efficient path to research plane crack problems especially composite materials plane fracture mechanicals is found.
8. 测试了材料的室温与高温性能；通过SEM动态原位拉伸试验研究了复合材料的断裂过程；
The room temperature and high temperature mechanical properties of the composites were studied, and the fracture behavior of the composite was investigated by in-situ SEM observation.
9. 讨论了最大拉应力理论在V形切口中的应用问题；并探讨了复合型断裂准则的尺寸效应。
The application of the maximum tensile criterion to V-notch and the size effect of the fracture criterion of mixed mode are also discussed.
10. 利用垂直截面法测量了08f钢经不同形变氮化复合后冲击断裂表面的分形维数。
Fractal dimension of impact fracture surface of 08f steel was measured by vertical section method.
11. 探讨了自生复合材料凝固组织对力学性能的影响以及室温和高温复合材料的断裂机制。
The influence of the microstructure on mechanical property and rupture mechanism of the composite at the room and elevated temperature were discussed.
12. 考察了复合材料的组织形貌，检测了复合材料的硬度和耐磨性，分析了复合材料的断裂模式。
The structure morphology the hardness and wear resistance of composite have been investigated, and fracture model of the composites has been analyzed.
13. 复合材料的主要破坏机制为基体断裂，当复合材料中粗颗粒含量增加或者粗颗粒本身的缺陷增多时，粗颗粒的断裂也将成为重要的复合材料破坏机制。
The fracture mechanism of composites is matrix crack, but the particle crack will be the main crack mechanism when the content of coarse or the flaw in the coarse increased.
14. 并对复合材料剪切断裂机制进行了初步探讨。
The mechanism of the shearing crack of the composite was discussed.
15. 本文利用紧凑试样在拉-剪复合加载下进行了断裂试验。
A compact specimen is put to the fracture test under tension-shear combined loading.
16. 只有建立复合材料的桥连动力学模型，才能更好地研究复合材料的断裂动力学问题。
Only, a dynamics model of bridging fiber is built, fracture dynamics problems of composite materials are solved very well.
17. 分析内爆炸圆管膨胀破碎过程的应力，提出确定内爆炸圆管断裂半径的复合判据，从理论上预测不同材料圆管的破片初速度。
Stresses of the in-explosive cylinder were analyzed, compound criteria for determinating the fracture radius was put forward to calculate the initial velocity of cylinder fragment.
18. 复合材料内部渗流途径断裂引起导电性的下降。Www.wENtIyi.cOM
The decrease of electrical conductivity of the composite is attributed to the interruption of percolation path.
19. 力学性能测试结果表明，随着烧结温度的升高，70W_2B_5/C复合材料的断裂性与维氏硬度均增加。
The mechanical properties results show that the fracture toughness and Vickers hardness of the 70W_2B_5/C composite increase with the sintering temperature.
20. 采用拉伸屈服强度定量表征了界面相互作用的强弱，研究了界面相互作用对三元复合体系拉伸断裂形态的影响。
Tensile yield strength was used to quantitatively evaluate the interfacial interactions, which have significant influence on the tensile fracture morphology of the composites.
21. 目前很难对晶须增韧陶瓷复合材料的断裂韧性进行理论计算。
It is very difficult to compute fracture toughness for silicon carbide whisker reinforced ceramic composite theoretically so far.
22. 研究结果表明，该准则与一些试验结果吻合很好，它不仅可以广泛地用于分析岩土类材料的复合型断裂问题，而且也可以用于金属材料的断裂分析。
The consistence of the criterion with the test results indicates the criterion is suitable for analyzing mixed mode cracking not only of rock and soil but of metal as well.
23. 结合拉伸断口形貌分析，讨论影响铅基复合材料拉伸断裂过程的主要因素。
The main factor which affects on the tensile fracture of the C/Pb composites was given.
24. 复合材料的断裂形貌为韧窝加沿晶断裂。
The composite displays the fracture features of the dimple and intergranular fracture.
25. 渗透复合体在断裂过程中可见：裂纹偏转、晶体拔出和穿晶断裂。
In the rupture process of the composite, crack deflexion, crystal evulsion, and rupture through crystal could be observed.
26. 应用线弹性断裂力学的弹性能释放率及裂纹扩展阻力等基本概念和理论，建立起确定纤维增强高分子聚合物复合材料断裂韧性的能量方法。
An energy method for determining fracture toughness of fibrous composite laminates was based on the theory of elastic energy release rate and crack-growth resistance in this paper.
27. 早期重力滑动与晚期断裂深部挤压复合型；5。深断裂挤压与重力扩张复合型。
The early gravity sliding with the late fault compression 5. The deep fault compression with the gravity spreading.
28. 早期重力滑动与晚期断裂深部挤压复合型；5。深断裂挤压与重力扩张复合型。
The early gravity sliding with the late fault compression 5. The deep fault compression with the gravity spreading.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！