雾化粉末用英语怎么说,雾化粉末的英文翻译


词语导航

基本信息

词语:雾化粉末

繁体:霧化粉末

拼音:wù huà fěn mò

英语翻译

【化】 atomized powder

分词翻译

雾化的英语翻译:

【化】 atomization; atomize; nebulization

粉末的英语翻译:

dust; farina; powder

翻译例句

1. 气雾化粉末触媒氧等杂质含量远低于水雾化。

The content of impurities in water - is greater than that in gas - atomization.

2. 对雾化粉末中各元素分布的分析表明,硅、铜等元素在晶界上有富积现象。

Analysis of element distribution shows that the enrichment of si and Cu exists on the grain boundary.

3. 国产氩气雾化粉末经热等静压或再经锻造的FGH95合金也出现多种夹杂,影响力学性能稳定。

The domestic alloy FGH95 made from argon atomized powder, then consolidated by HIP with or without forging, also contains various kinds of inclusions affecting the stability of mechanical properties.

4. 结果表明:在一定雾化条件下,氦气雾化粉末具有最高的有效雾化率、良好的粒度分布,且球形度最好;

The results show that the free-lead solder powder is best in the efficient atomization efficiency, size distribution and degree of sphericity with helium as the atomizing medium.

5. 本文介绍了用扫描电子显微镜和俄歇电子谱仪观察和分析雾化态和热等静压态高温合金粉末颗粒的表面。

An investigation of the surface of Ni-base superalloy powder particles in both as-atomized and as-HIP" ed conditions has been presented in the paper.

6. 从雾化工艺参数方面出发,研究了其对粉末粒度的影响,为工业生产提供了有益的参考。

In this paper the effect of processing parameters on the granularity of metal powder is discussed, it may provide some useful reference for practical production.

7. 本文介绍了雾化区温度分布、金属粉末粒度及速度分布的在线测量技术,它们包括图象技术与非图象技术两大类。

Some on-line available techniques for measurementS of temperature profile and distribution of velocity and size of droplet and powder are introduced in this paper.

8. 重点讨论了热喷雾化工艺参数对热喷铜锌粉末的粒度与颗粒表面性质的影响;

The TA parameters that influenced the particle"s size and the powder"s surface properties were emphatically discussed.

9. 研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。

The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.

10. 由于镁及镁合金的独特性能,其粉末及粉粒通常用球磨法、铣削法、雾化法生产,特别是铣削法用得最多。

The production technology for Mg and Mg alloy powders are:grinding milling, atomisation, melting and recycling, turning and chipping.

11. 采用超音速气体离心雾化技术,研究了不同工艺条件对银稀土合金粉末性能的影响。

The supersonic gas-centrifugal atomization Technology was used to study the influence of distinctive factors on the properties of AgRE alloy powders.

12. 研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。

Influences of carbon, silicon and aluminium on the surface reaction of austenite stainless steel powder during sintering have been studied.

13. 研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。

This paper analyzes the influences of carbon, silicon and aluminium on the surface reaction when sintering austenite stainless steel powder.

14. 介绍了水雾化-直接烧结粉末高速钢的研究和动向。

The research and development trend on high-speed steels sintered from water atomized powder ware discussed.

15. 对于大多数合金,只要在雾化时采取减少与氧的接触,就能达到降低合金粉末中氧的含量的目的。

Regarding majority alloy, so long as in atomization time adopts reduced and the oxygen contact, can achieve reduces in the powdered alloy the oxygen content goal.

16. 本文以紧耦合气体雾化技术对这一粉末进行研制,分别研究了导液管伸出量、雾化气压对粉末的平均粒度与微细(粉)末收得率的影响。

The effects of the protrusion length of the melt delivery tube and the atomization gas pressure on the average particle size and fine powder yield were studied.

17. 在合适的液流直径下,随着雾化压力、过热温度的增加,银稀土合金粉末粒径更细,但其颗粒形貌变得更加不规则。

With the increase of atomization pressure and at over heated temperature and suitable liquid flow diameter. , finer and irregular shape powders can be obtained by this technology.

18. 在气体雾化过程中,采用限制式喷嘴以实现超音速气流雾化,能有效细化粉末颗粒。

The spraying nozzle of controllable type is applied in gas atomization to realize ultrasonic atomization and ensuring particles finely granulated.

19. 本发明提供一种循环式雾化金属粉末制备方法和装置。

The invention provides a preparation method of circulating atomization metal powder and a device thereof.

20. 从国内外研究水雾化制粉的现状入手,在综合国内外研究资料的基础上,为实现高压水雾化制取不锈钢球形或类球形粉末,设计了一种高压水雾化、低压氮气保护的组合雾化喷嘴。

Based on this, a combination nozzle with high pressure water-atomizing and low pressure nitrogen protection functions is designed to manufacture spherical or quasi-spherical stainless steel powders.

21. 使雾化,使成微粒,使成粉末使成为极小颗粒或微小尘埃。WwW.WENTIyi.CoM

To reduce to tiny particles or a fine spray.

22. 介绍了气雾化微细金属粉末的生产工艺。

This paper discussed the process of the sas atomization of fine metal powder.

23. 对于雾化法得到的ZWC预合金粉末和ZSF预合金粉末组成的胎体锯片,金刚石浓度为18%时即能够保证有较好的锋利度、耐磨性以及加工质量。

Better sharpness, wearability and working quality of the saw blades can be ensured by using atomized prealloyed powder ZWC and ZSF at diamond concentration of 18%.

24. 研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。

The surface reaction of water atomized 304l austenitic stainless steel powder during sintering has been studied.

25. 研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。

The surface reaction of water atomized 304l austenitic stainless steel powder during sintering has been studied.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!