编程脉冲用英语怎么说，编程脉冲的英文翻译

词语导航

基本信息

词语：编程脉冲

繁体：編程脈沖

拼音：biān chéng mài chōng

英语翻译

【计】 programming pulse

分词翻译

编的英语翻译：

plait; raddle; weave

程的英语翻译：

order; rule
【化】 range

脉冲的英语翻译：

impulse; pulse
【计】 pulse
【化】 pulse
【医】 pulse

翻译例句

1. 可编程脉冲延时是由EPLD来实现的。

The programmable pulse delay is implemented by EPLD.

2. 在编程脉冲之间的时期中，实施检验操作。

In the periods between the program pulses, verify operations are carried out.

3. 图14描绘施加于循环存储器装置的编程脉冲。

FIG. 14 depicts programming pulses applied to a cycled memory device.

4. 文中讨论了基于EPLD的可编程脉冲延时单元。

In this article, a programmable pulse delay unit based on EPLD is discussed.

5. 编程脉冲具有恒定的脉冲宽度和增大的幅度，直到达到最大电压。

The programming pulses have a constant pulse width and increasing magnitudes until a maximum voltage is reached.

6. 该仪器由可编程脉冲发生器、高压可调稳压电源、高压功率开关和保护电路组成。

It mainly consists of a programmable pulse generator, adjustable high voltage regulator, high voltage switch and protection circuits.www.WENtIyi.CoM

7. 在另一实施例中，在脉冲达到最大幅度之后，在验证操作之间施加多个编程脉冲。

In another embodiment, after the pulses reach the maximum magnitude multiple program pulses are applied between verification operations.

8. 此外，利用反向偏置所述存储器单元的二极管的编程脉冲对所述存储器单元进行编程。

Further, the memory cell is programmed utilizing a programming pulse that reverse biases the diode thereof.

9. 在脉冲多普勒数字化引信的基础上，详细设计了可编程脉冲发生器、数字化接收机和数字信号处理机。

In the basis of pulse Doppler digital fuze, the programmable pulse generator, digital receiver and digital signal processor are designed in detail.

10. 用可编程脉冲信号发生器控制激光脉冲的频率、脉宽和功率，使激光脉冲在微机控制下可组成各种激光脉冲序列。

A programmable pulse signal generator is used for controlling laser frequency, pulse width and power, when the laser pulse is controled by a computer, it can generate a series of laser pulses.

11. 它们是模拟计数器，经编程后可以计算脉冲。

They are the analog counter, programmed to calculate pulse.

12. 本控制系统由交互式绘图编程、加工控制、大功率脉冲电源三部分组成，主机采用奔腾586计算机。

This system consists of interactive-drawing programming system, control of working, power source with large power pulse, the main unit uses pentium 586 chip.

13. 本文采用VHDL硬件描述语言对FPGA编程实现了高精度脉冲发生器。

In this thesis, VHDL hardware description language was applied to program FPGA to realize high accurate pulse generator.

14. 介绍了一种新型数字化终端，他利用数字信号处理器（DSP）及现场可编程门阵列（FPGA）能够实现脉冲应答测距和指令数据接收双重功能。

This paper introduce a sort of new numeric terminal which can use DSP and FPGA to realize double functions, they are distance measure by pulse responsion and incept of dictate data.

15. 现场可编程逻辑器件FPGA以一种新的数字细分技术为原理对计数脉冲做辨向和计数。

FPGA is designed to take count of the counting pulses and distinguish the direction by using a brand new digital subdivision technology.

16. 在恶劣电磁环境下，对现场可编程逻辑阵列（FPGA）工作稳定性影响较大的是外界杂波脉冲和毛刺信号。

This paper introduces that some measures of restraining pulse jamming and enhancing the stability of FPGA chips in bad electromagnetic circumstance.

17. 在数控雕刻机控制软件中用直接函数计算法取代脉冲增量插补，能够满足高速高精度的要求，并用C语言编程实现。

It is used on the control software of the nc carver instead of the pulse increment interpolation and realized by C-language.

18. 以现场可编程门阵列（FPGA）作为触发脉冲生成器，精确性高，并具有相序自适应性。

The digital trigger to silicon controlled rectifier based on field programmable gate array (FPGA) has high accuracy and the ability of phase self-adjusting.

19. 为解决大齿轮在机测量过程中采用比例驱动跟踪测量技术时转角脉冲当量过大的问题，研究开发了可编程动态倍频器。

To solve the problem of exaggerated angle pulse in the ratio driving and tracing measuring technique in testing in situ for large gears, the programmable dynamic frequency doubler has been developed.

20. 详细说明了用BC D码拨盘开关控制步进电机步数和速度的方法及可编程序控制器编程软件实现脉冲分配器功能的方法。

It explicates the ways of stepping motor"s stepping count and speed in the control of the BCD-code dial switch, and the function of pulse distribution with the programmable soft of PLC.

21. 调制器输出由三个级联的有限脉冲响应（FIR）滤波器及后置的一个用户可编程后处理器处理。

The output of the modulator is processed by three cascaded finite impulse response (FIR) filters, followed by a user-programmable post processor.

22. 高性能，可编程的超声波脉冲发生器和宽频接收器。与仪器配套软件一起使用。

High performance, programmable ultrasonic pulser and broad band receiver. For use with virtual instrument software.

23. 提出一款基于大规模可编程逻辑器件设计的具有多种功能的电力电子设备通用脉冲发生专用集成电路(ASIC)。

This paper presents a general pulse generator application specific integrated circuit (ASIC) for power electronics devices designed with the large-scale programmable logic devices.

24. 数字脉冲压缩技术可靠性高，灵活性好，可编程，在现代雷达中广泛应用。

The digital pulse compression technology is of high reliability, good flexibility and programmability, so that it is widely used in modern radar.

25. 基于IS A总线的微秒级同步器采用可编程硬件定时，由晶振发出脉冲经分频后送入8254计数。

Programmable hardware timing was used in design of microsecond synchronizer based on ISA bus, after pulse generated by oscillator was divided frequency, it was sent to 8254 to count.

26. 该驱动板以现场可编程逻辑门阵列为DSP与编码器、脉冲命令和功率模块等电路之间的接口，以最新的智能功率模块(IPM)作为功率输出驱动芯片。

FPGA is used as interface between the DSP and the encoder, pulse command and power module. The latest intelligent power module (IPM) is used to provide the function of power stage.

27. 介绍了可编程控制器在脉冲反吹袋式过滤器控制系统中的应用，重点探讨了袋式过滤器节能降耗的改进方案。

The application of PLC in the control system of the pulse blow bag filter is described. Lays stress on the new way of energy saving of the bag filter.

28. 本文介绍了一种用于距离门脉冲多卜勒雷达的可编程序数字信号处理机。

A programmable digital signal processor for ranging gate pulse Doppler radar is presented.

29. 利用PLC高速计数模块直接将外部编码器发出的脉冲读入，在PLC内部编程，通过程序控制完全能取代位置控制器的所有功能，从而省出位置控制器这一环节。

The pulse is directly read out by utilizing PLC high-speed counting module, the function of the locating controller can be achieved by program, thus the locating controller are saved.

30. 通过使用可编程控制器中的专用脉冲输出指令和高速计数器，实现了对辐照仪步进电机的精确控制。

The accuracy control of the motors in Gamma-ray irradiation of blood is realized by means of the inner pulse output code and the high-speed counter in PLC.