平面应变用英语怎么说,平面应变的英文翻译


词语导航

基本信息

词语:平面应变

繁体:平面應變

拼音:píng miàn yīng biàn

英语翻译

【化】 plane strain

分词翻译

平面的英语翻译:

flat; plane; surface
【医】 flat; plane; planum

应变的英语翻译:

meet an emergency
【化】 strain
【医】 strain; straining

翻译例句

1. 在平面应变拉伸的情况下仿造了板形的失效过程。

Failure processes of sheet metals are modeled under plane strain tension.

2. 新的结果还解释了平面应力和平面应变问题的区别。

The new result here explains the difference between the cases of plane strain and plane stress.

3. 隧道支护结构应力分析习惯于采用平面应变问题来处理。

In the tunnel support construction stress analysis, it is conventional to use two dimensional strain principle.WWw.weNtIyI.CoM

4. 由有限变形理论推导出单向压缩和平面应变有限元模型。

The corresponding constitutive equations based on finite deformation theory are presented.

5. 文章根据平面应变假设,建立了合理的数值模拟研究模型。

This paper use the plane strain hypothesis to build a reasonable study model of numerical simulation.

6. 本文介绍了一种确定平面应变中最大主应变方向的新方法。

This paper introduces a new way for defining the maximum principal strain direction in plane strain condition.

7. 分析包括了平面应变、平面应力和出平面应变剪切三种情况。

The analysis covers plane strain, plane stress and anti-plane strain shear cases.

8. 并发现在平面应力状态下,梁的梯度效应略强于平面应变状态。

Results also show that the scale effect in plane stress state is slightly stronger than that in plane strain state.

9. 模型中使用两种位移边界条件,并采用平面应变条件进行计算。

Two types of displacement boundary condition are considered in the numerical model.

10. 维护边坡稳定的挡土墙设计,都是按弹性力学平面应变问题分析的。

The retaining wall for remaining stability of slope are all designed as plane strain problem in elastic theory.

11. 本文运用平面应变有限单元法,分析了不同沉降量对路面结构的影响。

By using plane strain FEM in this paper, the affection is analysed about differential settlements value to pavement structure.

12. 推导了当考虑热效应时十次对称二维准晶体平面应变问题的通解表示。

The general solution for plane strain problems in decagonal quasicrystals accounting for thermal effect is derived.

13. 试验表明沿滚轮和轨道的侧向存在变形,不满足平面应变问题的条件。

It is found that lateral deformation exists, which implies the condition of plane strain does not fulfill.

14. 将盐层作为马克斯威尔体,建立了平面应变问题的粘弹性体力学模型。

The salt formation is regarded as Maxwell model, and a viscous elastic mechanical model for plane strain features is established.

15. 分析了平面应变压缩过程中金属的非对称流动方式的进展以及产生原因。

The development and reason of asymmetric flow pattern during plane strain compression was analyzed.

16. 所以本文将介绍平面应变断裂韧度KIC的测试试样、方法及步骤等。

So the method and steps of the testing for the plane fracture toughness K IC are explained.

17. 第4章对平面应变状态下应变软化岩石试件的孔隙压力效应进行数值模拟。

In chapter 4, the influences of pore pressure on shear bands and on complete stress and strain curves have been modeled.

18. 原状粘性土在平面应变条件下量测侧向局部变形的试验研究国内外鲜见报导。

Study of tests for measuring lateral strain localization of undisturbed clay in the condition of plane strain compression was rarely reported at home and abroad.

19. 平面应力条件下裂端的约束水平远低于相应条件下平面应变时裂端的约束水平。

The restraint level of plane stress is lesser than that of plane strain at the same mixed condition.

20. 采用平面应变有限元方法,对土体运动作用下的被动桩桩土相互作用进行分析。

The pile-soil interaction behavior of passive pile under soft soil movement action was analyzed using plain strain finite element analysis including the plasticity and large strain of soil.

21. 应用上限元方法分析了可压缩材料平面应变挤压问题,并与致密材料进行了比较。

The extrusion of compressible material in plane strain is analysed in use of UBET and compared to fully dense material.

22. 土的平面应变是岩土工程中常见的状态,其中零应变方向的主应力是十分复杂的。

Plane strain state is familiar in geotechnical engineering, and estimating the principal stress in the plane strain state is very complicated.

23. 目前在相似材料模拟试验中,常采用平面应力模型与平面应变模型两种受力状态。

At present, two stress states — the planar stress and the planar strain are usually adopted in the modeling experiment of the equivalent materials.

24. 本文对平面应变情况下不可压缩橡胶类材料裂纹尖端弹性场进行了有限变形分析。

This paper contains an asymptotic finite-deformation analysis about the elastostatic field near the crack-tip in an incompress rubber-like material.

25. 该方法按平面应变问题求解横向温度应力,在此基础上用解析公式计算纵向温度应力。

With this method, the transversal stresses are solved as a plane strain problem, and consequently the longitudinal stresses are calculated with an analytic formula.

26. 同时,多域边界元法也从细观力学的角度被用来探索这种不连续系统的平面应变问题。

In the point of view of meso - mechanics, the multi-zone boundary element method is used to analyze the behavior of the discontinuous system.

27. 研究了超高强度板条马氏体钢的平面应变断裂韧性与缺口韧性、拉伸塑性之间的关系。

The relationship between fracture toughness and notch toughness, tensile ductilities in lath martensite steel has been investigated.

28. 通过引入应力复数和应变复数的概念,提出了平面应力分析和平面应变分析的复数方法。

Complex number method for plane stress analysis and plane strain analysis is proposed by means of introducing the concepts of stress complex number and strain complex number in this paper.

29. 把匀质地基中的桩、土之间力传递问题当作两种不同介质相互接触的平面应变问题来研究。

The force transmission between pile and soil in homogeneous base is studied as plane strain occurred by mutual contact of two different media.

30. 采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响。

The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!