
词语导航
基本信息
词语:变滑
繁体:變滑
拼音:biàn huá
英语翻译
【医】 glabrification
分词翻译
变的英语翻译:
become; change
【医】 meta-; pecilo-; poecil-; poikilo-
滑的英语翻译:
slide; slip; slippery; smooth; crafty; cunning
翻译例句
1. 知道下了雪地面变滑给他带来严重的困扰时,他开始选择15分钟跳绳。
No problem until snow came down and made the surface slippery, causing him some serious problems. "…or take a rope and jump for 15 minutes. ", he remembered. So he did.
2. 建立了电子节气门体的数学模型,并以此被控对象在MATLAB/SIMULINK中设计并验证了改进型PID与变滑模控制器算法。
A mathematical model was set up for the ETB system. Based on it, an improved PID control algorithm and a varying sliding mode control algorithm were proposed and verified in MATLAB/SIMULINK.
3. 它需要柠檬汁来让已变干的扁豆入口更加爽滑。Www.weNTiYI.cOm
It needed lemon juice to sharpen the flatness of the dried lentils.
4. 仿真结果表明:开关磁阻电机的智能滑模变结构控制方法简单,有良好的动态性能,较好的鲁棒性。
The simulation results show that the method of intelligent sliding mode Variable Structure Control is simple, with good dynamic performance and robust property.
5. 利用变结构控制的不变性,使受控系统在滑模面上与满足匹配条件的系统不确定性无关。
By using the invariance property of VSC, the controlled system independent of the uncertainty which satisfies the matching condition on the sliding surface.
6. 仿真结果表明,滑模变结构控制的性能优于常规的PID控制,在系统参数变化时表现出更强的鲁棒性。
Simulation results show that the controller is better in comparison with traditional PID controller, and it has stronger robustness for the change of system parameters.
7. 针对数控机床的位置伺服系统,为其控制器设计了一种复合滑模变结构控制算法。
Aiming at the position servo system of NC machining tool, this paper designs a kind of control arithmetic on compound sliding variable structure for its controller.
8. 滑模变结构控制是一种非线性控制方法,对系统的参数变化和扰动具有安全的自适应性。
Sliding mode variable structure (SMVS) is a nonlinear control method, which is adaptive to disturbance and parameter variations.
9. 因而,本文研究滑模变结构控制在永磁同步电机控制中的应用。
Thus, this paper mainly researches the application of SMC to PMSM control.
10. 针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题,将边界层法用于滑模变结构控制器的设计。
This strategy combines the fuzzy logics with the method of sliding mode control, thus can reduce the chattering without decreasing the robustness of system.
11. 仿真结果表明,所设计的滑模变控制器使助力电机具有很好的动态性能,系统基本无抖动现象,实现了助力电机输出电流对目标电流的跟踪特性。
The simulation results show this control system has good dynamic property and negligible vibration, and efficiently makes the output current of direct motor trace the intent current.
12. 运用变结构滑模控制理论和多模型切换,使车辆转向控制具有良好的跟踪性能和鲁棒性。
The use of variable structure control theory and multiple-model conversion makes the vehicle steering control have favorable tracking capability and robustness.
13. 针对开关磁阻电机存在磁场严重的非线性且数学模型不精确等问题,提出了一种滑模变结构控制方法。
Aimed at the nonlinear magnetic field and the imprecise model of switched reluctance motor, the variable-structure control method with sliding mode is presented.
14. 本文论述了滑模变结构控制方法在列车自动控制系统中的应用研究。
The paper discusses the approach of variable structure control using in the automation train control system (ATCs).
15. 文章将灰色预测理论引入到滑模变结构控制中,设计了一种新型的灰色滑模变结构控制器。
In this paper, the grey predicting theory is introduced in sliding mode variable structure control and a novel grey sliding mode variable structure controller is designed.
16. 运用滑模变结构控制理论,设计了车辆操纵稳定性的控制器。
A vehicle handling stability controller is designed using variable structure control theory of sliding mode.
17. 针对磁悬浮系统的非线性和不确定性,设计了基于反馈线性化的滑模变结构悬浮控制器。
Aimed at the nonlinearity and uncertainty of magnetic suspension system, a slide mode variable structure controller is designed based on feedback linearization.
18. 针对一类不确定非线性受扰动系统,提出一种基于非线性迭代滑模变结构的增量反馈控制算法。
An increment feedback control method based on nonlinear iterative sliding mode variable structure control is presented for a class of uncertain nonlinear perturbed system.
19. 本文讨论了惯性平台稳定回路的变结构滑模控制规律的设计问题。
This paper discusses the design problem of the variable structure sliding mode control for the inertial platform stabilizing circuits.
20. 针对倒立摆的位移控制,提出一种非线性滑模变结构控制方法。
A nonlinear sliding mode control method is presented for single inverted pendulum position tracking control.
21. 模糊变结构滑模控制提供了跟踪的快速性和稳定性,PI控制则消除稳态抖动,提高了稳态精度。
The fuzzy variable structure sliding model control provides rapidity and stability for tracking, while PI control eliminates steady-state vibration and improves steady-state accuracy.
22. 针对滑模变结构控制的抖振问题,提出一种用于异步电动机矢量控制系统的积分滑模变结构速度控制方法。
A strategy of speed control for vector-controlled asynchronous motor drive system using sliding mode variable structure control with an integral action was proposed.
23. 在多输入系统控制中提出了全程滑模变结构控制方案和利用等效滑模方程进行的递阶滑模变结构控制方案。
A global sliding model variable structure control approach and a sort of hierarchical switching scheme used with equivalent equation are proposed for a class of multi-input systems.
24. 提出了一种滑模变结构滚转驾驶仪的设计方法。
Sliding mode control method for the design of roll autopilot was proposed.
25. 针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题,将边界层法用于滑模变结构控制器的设计。
To solve the chattering problem caused by general Sliding Mode control in active magnetic bearings control, a Boundary Layer Approach was used in the controller design.
26. 针对常规滑模变结构控制方法在电磁轴承控制当中引起的抖动问题,将边界层法用于滑模变结构控制器的设计。
To solve the chattering problem caused by general Sliding Mode control in active magnetic bearings control, a Boundary Layer Approach was used in the controller design.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
