搅拌轴用英语怎么说,搅拌轴的英文翻译


词语导航

基本信息

词语:搅拌轴

繁体:攪拌軸

拼音:jiǎo bàn zhóu

英语翻译

【化】 mixer shaft

相关词条

1.hogshaft  

分词翻译

搅拌的英语翻译:

agitate; beat up; churn; mix; stir; whip; whisk
【化】 agitate; agitating; agitation; stir; stir up; stirring
【医】 stir

轴的英语翻译:

axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core

翻译例句

1. 搅拌轴上的搁圈装置限制了搅拌轴的下坠。

A loop placement device on a stirring shaft limits the falling of the stirring shaft.

2. 水泥土的加固,可用调节搅拌轴回转速度来控制搅拌效果。

Fastened by cement, the agitation effection can be controlled by adjustment the rotation rate of agitation axis.

3. 在搅拌装置中,搅拌轴的结构设计直接影响到搅拌混合质量。

For an agitating device, the structure design of agitating shaft directly influences the mixing qualities of chemicals.

4. 某化工厂反应釜搅拌轴运行中经常出现异常现象,轴头部位磨损严重。

Abnormal phenomenon of stirring shaft in a chemical plant often occurs in operation. The shaft head is seriouslv worn.

5. 高速大长径比搅拌轴密封可靠性问题,一直是从事密封工作者探索的问题之一。

The question about the seals of high speed churn shaft with large ratio of length to diameter is one of the difficult problems.

6. 这为差速搅拌捏合机搅拌轴的结构设计及进一步的系统动力分析提供了理论依据。

It provides foundation for further systematic dynamic analysis and structure design of mixer shafts of differential velocity stirring kneader.

7. 高速大长径比压力反应釜搅拌轴密封性能问题一直是设计者与使用者研究的难题。

The sealing property problem for the stirring shaft of high-speed pressured reaction axe with large length to diameter ratio is always a difficult problem to study for designers and users.

8. 对该搅拌轴的受力、结构选型以及该槽材质、衬里的选取和结构进行了详细的论述。

Not only the forces that the stirring shaft are analyzed, but also a choice of materials, lining, and a structure of the tank are expounded.

9. 当搅拌轴旋转时,搅拌叶片强迫物料上下左右翻腾对揉,因而能在短时间内搅拌得非常均匀。

When the mixing axis revolve, the laminas can force materials to writhe up and down and double-knead at the same time, so it can mix uniformly in a short time.

10. 该搅拌机主要由搅拌筒体、搅拌轴及其轴端密封装置,以及主传动机构和卸料机构等部分组成。

Tthe mixer is primarily composed of mixing silo, mixing axis and their axle end seal device, main drive gear and discharging mechanism etc.

11. 用数学方法对搅拌捏合机搅拌轴螺杆外形曲线的形成过程进行了详细的推导,得出了主搅拌轴截面曲线形状公式。

The section curve equation of main stirring shaft is obtained by deducting the screw profile curve formation process of the stirring kneader.

12. 搅拌轴的设计,必须进行强度、刚度和临界转速的校核,还要正确选择轴的公差配合,只有这样,才能保证轴既能正常运转,又能追求最低的加工成本。

Checking its strength, rigidity and critical speed, correct selecting its tolerance and fit are necessary in a mix axle"s design, by which the axle"s normal operation and least cost can be ensured.

13. 笔者采用研制的双卧轴强制式搅拌装置,通过正交试验对其参数优化问题进行了比较深入的试验研究。

Parameters optimization of mixing mechanism is studied on the basis of twin-shaft mixer designed by the author and orthogonal experiment.

14. 通过很多工程的实践证明,在基坑围护方面,三轴水泥搅拌桩确实具有许多其他工艺所没有的优点。

Practice has proved that through a number of projects, in the foundation pit, the axis of cement mixing pile does have a number of other processes does not have advantages.

15. 双轴分散机适用于二种或多种液体和粉状物料搅拌和分散。

It is applicable for agitation and dispersion of two or more kinds of liquids or powders.

16. 可拆卸的混合轴可以被淹没在汤盆或搅拌碗来创建一个平滑的一致性。

The detachable blending shaft can be submerged in soup POTS or mixing bowls to create a smooth consistency.

17. 利用正交试验,对双卧轴搅拌机搅拌装置的结构参数进行了研究。

Based on orthogonal test, structural parameters of mixing mechanism for twin shaft mixer are researched.

18. 参照以往的成果,提出了双卧轴振动搅拌机的设计方案,并详细阐述了振动参数和搅拌参数的设计。

On the basis of past production , puts forward the designing project of double horizontal shaft vibrating mixer, and concretely explicates the vibrating and mixing parametric design.

19. 混合轴,搅拌碗和打蛋器洗碗机。

Blending shaft, mixing bowl and whisk are dishwasher safe.

20. 实验结果表明:随着距轴肩和搅拌针距离的增大,速度场开始减弱,焊缝金属由顶面向底面、由搅拌区向旋转区的流动也随之减弱。

The result shows that the velocity field changes with the increase of space from shoulder and stir tool and the flow of weld metal from top to bottom and stir zone to rotation zone also weakens.

21. 也正是因为这样,近几年来三轴搅拌桩已经越来越多的应用于基坑用护工程,并且也取得了很好的经济效益。

Is precisely because of this, in recent years has been three-axis mixing pile more and more used in Foundation Pit Support Engineering, and also achieved good economic results.

22. 本文对卧式双轴气相聚合搅拌床反应器的混合特性进行了实验研究。

The study on mixing characteristics in a horizontal stirred bed reactor with double parallel axes was carried out.

23. 在轴的一端安装齿轮,通过与安装在排种器上的齿轮外啮合,使搅拌轮随排种器反向转动。

One end of the shaft is provided with a gear wheel which is externally engaged with a gear wheel on a seeding unit, so that the stirring wheel is reversely rotated following the seeding unit.

24. 坚固耐用的平面轴斜齿轮传动,能够经济、有效的完成搅拌任务。

The robust parallel helical gearing allows for a rugged, economical agitation solution.

25. 本文在对双卧轴搅拌机工作装置参数理论分析的基础上,设计了试验样机。

On the basis of theory analysis of the working device"s parameters about the twin-shaft mixer, the paper designed a twin-shaft mixer for test research.

26. HLS系列混凝土搅拌设备,采用意大利SICOMA系列或国产JS系列双卧轴强制式搅拌主机。

HLS series of concrete mixer adopts Italian SICOMA or domestic JS series of compulsory dual-axial mixing console.Www.WENTIyi.coM

27. 双轴搅拌机适用于二种或多种液体和粉状物料进行搅拌和分散。

Dual shaft disperser suitable to stir and disperse two many kinds of liquid and power materials.

28. 为分析搅拌头轴肩底面轮廓对材料流动的影响,分别建立了平面轴肩和凹面轴肩。

The flat and concave shoulder was set up to study the influence of the profile of concave shoulder on the flow of aluminum.

29. 为分析搅拌头轴肩底面轮廓对材料流动的影响,分别建立了平面轴肩和凹面轴肩。

The flat and concave shoulder was set up to study the influence of the profile of concave shoulder on the flow of aluminum.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!