
词语导航
基本信息
词语:机械载荷
繁体:機械載荷
拼音:jī xiè zǎi hé
英语翻译
【化】 mechanical load(ing)
分词翻译
机械的英语翻译:
engine; machine; machinery; mechanism
【化】 machine; machinery
【医】 mechano-
【经】 machine
载荷的英语翻译:
load
【化】 load
翻译例句
1. 对于机械载荷作用的细长梁,轴向伸长可以忽略。
For a slender beam subjected to mechanical loads, the axial extension can be neglected.
2. 叶片在气动和机械载荷作用下的结构动力学响应分析。
The dynamic response analysis of the rotating blade when the aerodynamic and mechanical loads are applied on the blade.
3. 评述了机械载荷下材料力学行为有限元模拟的先进技术。
Advanced finite element techniques for the simulation of materials behavior under mechanical loading are reviewed.
4. 因为这种扁平的配置,施加到电缆上的机械载荷分散在其总宽度上。
With this flat configuration, the mechanical load applied to the cable is distributed over the total width of the cable.
5. 研究了电磁场环境下机械载荷作用圆形导电薄板的磁弹性强迫振动问题。
Magnetoelastic forced vibration of a thin round plate subjected to mechanical loading in magnetic field is studied.
6. 结果还表明,电位移强度因子取决于材料常数和机械载荷,但与电载荷无关。
It is also found that the electric displacement intensity factor depends on both material properties and the mechanical loads, but not the electric loads.
7. 近期的研究认为种植体边缘骨吸收与吸烟、感染、机械载荷和代谢性疾病等有关;
Recent studies suggest that the risk factors for marginal bone loss around implants are smoking, infection, mechanical loading, bone quality and metabolic diseases.
8. 研究了功能梯度材料截顶圆锥壳在横向机械载荷与非均匀热载荷同时作用下的变形问题。
The deformation of functionally graded truncated conical shell subjected to transverse mechanical load as well as non-uniformly thermal load is studied.
9. 目的研制冷热循环机械载荷咀嚼模拟疲劳试验机来人工模拟口腔环境的温度变化和咀嚼负荷,检测口腔材料的疲劳寿命。
Objective to design a new kind of thermocycling and mechanical loading (TCML) chewing simulator and test the chronic fatigue characteristics of dental materials and prosthesis.
10. 井下使用的机械装置,用于向另一个井下部件传递一种冲击载荷,尤其当该部件被卡住时。
A mechanical device used downhole to deliver an impact load to another downhole component, especially when that component is stuck.
11. 除了控制的机械轴和轴承载荷,耦合进一步保护通过提供电力和热轴之间的耦合隔离高度编码器。
In addition to controlling mechanical shaft and bearing loads, the coupling further protects the encoder by providing a high degree of electrical and thermal isolation between coupled shafts.
12. 机械设计除了计算载荷和应力、选择合适的材料外,还包括许多其它因素。
The design of a machine includes many factors other than those of determining the loads and stresses and selecting the proper materials.
13. 象图23中所示的那种力矩载荷经常在机械零件中出现。
Moment loads, such as those described in Fig. 23, frequently occur in machine parts.
14. 在飞机结构中,机械连接是传递力学载荷的主要方式。
Mechanical joint provide the primary means for transferring load among components in the construction of aircraft structures.
15. 给出了小挠度下,在外界载荷作用下总应力表达式和薄膜机械灵敏度表达式,并分析了残余应力对二者的影响。
We present an analytical solution for the total stress and mechanical sensitivity of highly boron doped si diaphragm with small deflection considering effect to result from the residual stress.
16. 在研究承受冲击载荷的机械零件设计时,提出了一个新的设计原则,并将冲击问题转化为形状优化设计问题。
Some elements of a machine olden work under impact and this study represents a new design principle for impact, which could turn the design under impact into a shape optimal design.
17. 对于那些长期经受交变载荷作用的机械零件和工程构件,疲劳破坏是一种主要的破坏模式。
Fatigue damage is the main destroy mode for the machinery parts and engineering structures under alternate loading over a long period of time.
18. 空间机械臂在发射时承受极为恶劣的载荷环境,为确保机械臂在发射工况下不被损坏,利用包带式锁解机构对其进行了可靠锁紧。
For the sake of insuring the mechanical arm would not be damaged under the working condition of launching, a reliable locking was carried out by the use of belting typed lock-unlock mechanism.
19. 加载工程机械主要的两种加载模式正弦波载荷和阶跃载荷,试验台动态仿真的结果表明系统动态响应性能能够满足试验要求;
We put the two main engineering machine loading which are sinusoidal wave load and step load, and the results indicate that the dynamic responds are satisfied for the needs of the experiments.
20. 阐述一种大型采掘机械模拟截割试验载荷的性质、测试数据处理的理论、步骤和结果。 介绍了动态测试的方法和所用的仪器。
The load properties and the principle, procedure and results of data processing for cutting simulation of large excavating machines is described.
21. C设计评审通常建立在对载荷,转子,机械部件,塔架和基础的可行性全面检查上。
The c-design Assessment is usually based on a complete plausibility check of the loads, the rotor blades, the machinery components as well as of the tower and foundation.
22. 分析了疲劳试验系统中存在的普遍问题,即试验载荷的峰值和均值随着试验时间和试件的机械性能变化而发生漂移。
The general problem in the fatigue test system that the amplitude and mean of load signal will be changed with test time and change of mechanical characters of specimens is analyzed.
23. 由于机械系统在长时间的工作过程中,受到环境和载荷的影响,避免不了发生失效。
Because the mechanical systems work in the long time, affected by the environment and applied load, occurrence of failure is unavoidable.
24. 由于其工作载荷复杂多变,因此其机械性能、安全可靠性等备受关注。
Because of its complex and changing work loads, its mechanical properties, such as security and reliability, receive much concern.
25. 机械零件在随机载荷作用下产生疲劳失效。
The machine parts occurred fatigue failures under the actions of random loads.
26. 介绍机械密封常用的密封面载荷、比载荷和载荷系数。
The concepts of load, unit load and loading factor are introduced.
27. 载荷用螺旋式机械施加并保持不变,以保证打印出的位移能够和已知载荷相适应。WWW.WeNTiYi.COM
The load was applied and held constant by a screw-type machine to insure that the displacement printout could be paired with a known load.
28. 载荷用螺旋式机械施加并保持不变,以保证打印出的位移能够和已知载荷相适应。
The load was applied and held constant by a screw-type machine to insure that the displacement printout could be paired with a known load.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
