等溶胶用英语怎么说，等溶胶的英文翻译

词语导航

基本信息

词语：等溶胶

繁体：等溶膠

拼音：děng róng jiāo

英语翻译

【化】 isosol

分词翻译

等的英语翻译：

class; grade; rank; wait; when
【机】 iso-

溶胶的英语翻译：

collosol; sol
【化】 colloidal sol; collosol; sol; sol rubber
【医】 collosol; sol

翻译例句

1. 为了去除压缩空气中的微粒、液体或水、油溶胶等，对压缩空气进行过滤处理是非常必要的。

In order to remove the compressed air particles, liquid or water, oil, and sol, etc, to filtering compressed air handling is very necessary.

2. 霾在大气逆温等稳定气象条件下，由气溶胶和气体污染物造成的一种城市和区域性空气污染现象。

Under inversion and other weather conditions, haze is a form of urban and regional pollution, causing by aerosol.

3. PV C塑溶胶配制的密封胶具有单组分、无溶剂、贮存稳定及弹性好、耐化学介质优良等特点。

The fluid sealant formulated with PVC plastisol has the good characteristics of mono component, non-solvent, storage stability.

4. 激光雷达信号在大气中传输时，大气中的气体分子和大气气溶胶粒子、尘埃、雾、雨等对激光信号的吸收和散射导致光信号能量的衰减是影响激光雷达信号传输的重要因素。

When radar signals propagate in the atmosphere, the absorption and scattering of air molecule, aerosol particles, dust and cloud, fog and rain result in energy attenuation of ladar signals.

5. 应用元素富集因子、相关分析和因子分析等方法研究了西太平洋、东印度洋、南大洋、中国南极中山站邻近海域气溶胶中各元素的来源。

Source discrimination of the elements in the marine aerosol was discussed using the methods of enrichment factor, factor analysis and correlation analysis.

6. 在实验的基础上，研究了沙子、粘土等工程材料对单分散和多分散气溶胶的过滤特性。

The filtration characteristics of monodisperse and polydisperse aerosols are studied experimentally with engineering material, such as sand and clay.

7. 同时，研究了声压级、停留时间和气溶胶初始浓度等参数对声波团聚的影响。wwW.WEntiyi.COm

Besides, the influences of sound pressure level, residence time and initial total number concentration on agglomeration were investigated.

8. 大气校正的精确度主要取决于气溶胶光学特性和漫射透过率等参数的精度。

The accuracy of atmospheric correction was decided mainly by the accuracy of aerosol optical characteristics and atmospheric diffuse transmittance parameters.

9. 陶瓷薄膜的制备技术多种多样，如物理气相沉积、化学气相沉积、高温烧结和“溶胶-凝胶”法等。

There are many techniques for fabricating ceramic films such as PVD, CVD, high-temperature sintering and sol-gel method.

10. 应用TG-DTA、XRD和FT-IR等测试手段研究了凝胶热处理过程中的相变化以及非水解溶胶-凝胶的反应过程。

The phase transformation of xerogels during heat treatment and the process of nonhydrolytic sol-gel reaction are studied by TG-DTA, XRD and FT-IR.

11. 目的评价滤毒罐、高效滤材和高效过滤器等微生物气溶胶防护装备的防护效果。

Objective To evaluate the protective efficacy of protective equipment, such as gas-filtering can, high-efficiency filtering material and high-efficiency filter, against microorganism aerosol.

12. 在浮动式刮刀涂层机上进行溶剂型聚氨酯涂层，易产生溶胶胶粒、涂层剂渗入基布等疵病。

Defects such as gel particle and coating agent penetrating into base cloth will easily arise in solvent-based polyurethane coating with float knife coater.

13. 溶胶-凝胶技术是制备有机-无机杂化材料的重要手段，在光致变色、光纤传感和发光等光化学杂化材料制备方面应用前景广阔。

Sol-gel technique is an important experimental method for preparation of organic-inorganic hybrid materials which can be widely used to manufacture photochromic, optical fibre and emission materials.

14. 化学镀法、化学气相沉积法及溶胶凝胶法等。

Fabrication methods often include electroless plating, chemical vapor deposition, and sol gel technique, etc.

15. 这些观测系统对微量气体、气溶胶、挥发性有机物、温室气体、太阳辐射、干湿沉降、气象要素等进行连续观测。

Through this system, trace gases, aerosol, volatile organic components, greenhouse gases, solar radiation, dry and wet deposition and meteorological elements can be observed continuously.

16. 某些地区人为气溶胶的强迫在量值上可与CO2等温室气体引起的强迫相比拟。

The radiative forcing due to human activity in some areas can be comparable in magnitude with the forcing caused by greenhouse gases, such as CO2 etc.

17. 探讨了正硅酸乙酯的溶胶-凝胶过程中，氢氟酸，盐酸，氨水，硫酸和醋酸等催化剂对水解、聚合和胶凝时间的影响。

In the sol_gel process of TEOS (tetraethoxysilane), the effects of catalysts on hydrolysis reaction, condensation reaction and gelling properties were discussed.

18. 通过透射电镜、激光粒度分布仪等测定了纳米颗粒的粒径和分布情况，并对纳米金溶胶的紫外可见吸收曲线进行了研究。

The particle size and distribution were determined by transmission electron microscopy and laser particle size distribution analyzer, ultraviolet-visible absorption curve was also characterized.

19. 经溶胶-凝胶法制备的氧化铝气凝胶是一种新型耐高温的纳米多孔材料，在高温催化和高温隔热等领域具有广阔的应用前景，因而备受关注。

Synthesis of alumina aerogel via sol-gel has motivated a worldwide interest due to their application potentials in the high-temperature catalysts and high-temperature thermal insulation etc.

20. 涂料的粘结剂主要由硅酸乙酯、硅溶胶、水玻璃等组成。

The main constitution of the coating is silica sol sodium silicate ethyl-silicate silica sol, sodium silicate, ethyl-silicate.

21. 溶胶-凝胶法是一种有发展潜力的制备方法，采用溶胶-凝胶法可获得纯度高、粒度细的优质硬质合金粉末，可解决传统的CVD、PVD等涂层结合力不高的问题。

Sol-gel technology is an appealing preparation method. Using the method, fine and high purity powder can be prepared, higher binding force than CVD and PVD coatings can be achieved.

22. 目前钛酸锶粉末的制备方法主要有：高温固相烧结法、水热法、化学共沉淀法、溶胶-凝胶法等。

The methods of preparing SrTiO_3 powders include solid-state method, co-precipitate method, sol-gel method, hydrothermal method, etc.

23. 另外，使单体分散硅溶胶固化而得到的树脂成型体等的聚合物随时间发生变性、分解等。

In addition, a polymer of a resin formed article etc. obtained by curing a monomer-dispersed silica sol may be deteriorated, degraded, or the like with time.

24. 另外，使单体分散硅溶胶固化而得到的树脂成型体等的聚合物随时间发生变性、分解等。

In addition, a polymer of a resin formed article etc. obtained by curing a monomer-dispersed silica sol may be deteriorated, degraded, or the like with time.