涂料组分用英语怎么说,涂料组分的英文翻译


词语导航

基本信息

词语:涂料组分

繁体:塗料組分

拼音:tú liào zǔ fēn

英语翻译

【化】 coating composition

分词翻译

涂料的英语翻译:

coating; painting
【化】 coating

组分的英语翻译:

【化】 component; constituent; ingredient

翻译例句

1. 由HAR和六次甲基二异氰酸酯反应制备了性能优异的高固体分双组分丙烯酸聚氨酯涂料。

A double component coating, acrylic polyurethane with high solid and good performance, was prepared by the reaction of HAR and HDI.

2. 介绍了这种单组分石油沥青聚氨酯防水涂料的性能。

The properties of the one component asphalt based polyurethane waterproof coatings were introduced.

3. 通过调整丙烯酸组分的单体组成和涂料配方,研制出一种耐候性的IPN改性丙烯酸聚氨酯涂料。

A weather resistant IPN-improved acrylic polyurethane coating has been developed by controlling the composition of acrylic prepolymer and coating formulation.

4. LB 20 SBS单组分橡胶防水涂料是新型、高性能的建筑防水材料。

The LB20SBS single component rubber waterproof paint is a new high performance construction waterproof material.

5. 介绍了西安某酒店五楼的室内游泳池采用暴露型单组分聚脲涂料进行防水维修的施工工艺。

The article describes the way of waterproofing maintenance with exposure-type single component polyurea coating for an indoor swimming pool on the fifth floor of a hotel, Xian.

6. 以聚醚多元醇、石油沥青、甲苯二异氰酸酯、稀释剂及相溶化助剂等为原料,制备了一种湿固化单组分防水涂料。

A moisture curable one component waterproof coatings was prepared from polyether polyols, petroleum asphalt, toluene diisocyanate, diluent and a compatibility modifier, etc.

7. 介绍了光固化涂料体系几种重要组分:低聚物、活性稀释剂(单体)、光引发剂的研究进展。

The development of oligomer, active diluent(monomer), photoinitiator as major components of UV curing coatings system were described.

8. 考察了不同催化剂对双组分聚醚型聚氨酯防水涂料固化效果及固化后性能的影响。

The effects of different catalysts on the solidification and the mechanical properties of the casting film of two component polyether type polyurethane waterproof coating were investigated.

9. 介绍了本防火涂料的组分配比,生产工艺。

The technology as well as the component proportion of the fire -retardant coating was introduced.

10. 讨论了各组分对涂料性能的影响。

The effects of the ingredients of the formulation on the coatings properties were discussed.

11. 在此基础上,本研究制备了耐候性优良、热稳定性好、其他性能优良的双组分聚氨酯涂料。

On the basis of those studies, a kind of two-package acrylic polyurethane coating with excellent performance, such as excellent weatherability and thermal stability, etc, were manufactured.

12. 介绍了该涂料的组分选择、配方、生产工艺和性能指标。

The selection of ingredients, formulation, production process and technical specification were described.

13. 它具有在宽范围的溶剂中的溶解度高,增强印刷油墨及涂料配方与其它组分的相容性的PU。

Its high solubility with a wide range of solvents enhances the compatibility of the PU with other components of printing ink and coating formulations.

14. 采用T-80聚醚多元醇与煤焦油为主要原料,合成了双组分聚氨酯防水涂料,对涂膜性能进行了测试,并对其影响因素进行了研究。

The bi component polyurethane coating of water proofing was synthesized by T 80 polyether polyol and coal tar. The properties of the coating film were tested and the effect factors were studied.

15. 讨论了发泡剂、成炭剂、脱水成炭催化剂、颜填料的选用,及各组分在防火涂料中的作用;

Selection of fireproofing coating components, such as forming agent, carbonforming agent, dehydration and carbonforming catalyst and colourant, were discussed.wWw.wenTiyI.com

16. 根据涂层的要求,选择了锌黄环氧底漆和双组分高固体丙烯酸聚氨酯漆作为厢体的涂料。

According to the requirement of coatings, yellow zine epoxy primer and two - pack high solid acrylate polyurethane coating are chosen to be containers paints.

17. 涂装时涂料的各组分应在喷涂罐或其他容器内混合均匀同时应连续或间断的进行混合。

Paint ingredients should be kept uniformly mixed in spray POTS or other containers during painting and the paint is continuously or intermittently mixed mechanically.

18. 由上述组分混合制成的涂料由有机物构成,涂于金属底材上,其涂层耐化学品特性是耐高温下化学品的腐蚀。

Since the coating made from the mixed components consists of organic substances, when being coated on a metal substrate, the coating can resist the corrosion of chemical under high temperature.

19. 综述了单组分常温自交联建筑乳胶涂料这一研究热点的进展情况。

This article summarizes the research hot-points and the development of one-can architectural latex coatings self cross-linked at room temperature.

20. 从反应速度、适用时间等方面研究了几种交联剂对水性双组分氟涂料漆膜性能的影响。

The influence of several cross-linking agents on the performances of film of two-pack waterborne fluorocarbon resin paint is studied, in terms of reaction rate and pot life.

21. 聚氨酯涂膜防水材料是双组分化学反应固化型弹性防水涂料。

Polyurethane coated waterproof material is a type of elastic waterproof material solidified in bi-component chemical reaction.

22. 有机硅组分的引入可以改善和提高粉末涂料涂膜性能,特别是耐候性及耐热性能。

The introduction of silicone composition to the powder coatings improves some properties and performance of the cured film especially in the thermal stability and weather resistance.

23. 在此采用封闭不饱和异氰酸酯与常用的丙烯酸酯类单体共聚制备单组分丙烯酸阴极电泳涂料。

Monocomponent acrylic cathodic electrophoretic coating was prepared by copolymerization of blocked unsaturated isocyanate and acrylate monomers.

24. 所得漆膜的机械性能达到溶剂型双组分聚氨酯涂料的性能,并具有优异的防腐蚀性。

The mechanical property of the film reached up to that of two-components solvent based PU coatings, and the coatings possessed excellent anti-corrosive property.

25. 研究了粉煤灰填充双组分聚氨酯防水涂料的效果。

The influence of fineness of fly ash on film-forming of two-component polyurethane waterproof coating was studied.

26. 本文叙述的水性环氧树脂涂料是以环氧树脂为主体、水为分散剂、改性聚酰胺为固化剂的双组分涂料。

The so described water-base epoxy resin coating is a two-components coating with epoxy resin as the main component, modified polyamide as curing agent and water as dispersion medium.

27. 该涂料制备方法将制得的组分1按8∶1的重量配比与组分2的固化剂混合后,即得到该涂料。

The method for preparing the coating comprises the following steps of mixing the prepared component 1 and the component 2 with the weight ratio of 8:1, thus preparing the coating.

28. 双组分环氧煤焦油厚浆型涂料。用于保护被水浸泡的钢结构或混凝土结构。

A heavy-duty, high-build coal tar epoxy coating for the protection of steel and concrete in immersion service.

29. 光引发剂是紫外光固化涂料的关键组分,它对光固化涂料的光固化速度和固化膜的性能起主要作用。

As an important component of UV-curing system, the photoinitiators have significant effect on curing rate and film function of UV-curing.

30. 光引发剂是紫外光固化涂料的关键组分,它对光固化涂料的光固化速度和固化膜的性能起主要作用。

As an important component of UV-curing system, the photoinitiators have significant effect on curing rate and film function of UV-curing.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!