
词语导航
基本信息
词语:固件实现
繁体:固件實現
拼音:gù jiàn shí xiàn
英语翻译
【计】 firmware realization
分词翻译
固件的英语翻译:
firmware
【计】 firmware
实现的英语翻译:
come true; implement; realize; carry out; achieve; actualize
bring into effect; carry into effect
【计】 enablement
【化】 make good
【医】 realization
【经】 realize
翻译例句
1. 讨论了场导向控制以及如何用硬件和固件实现场导向控制。
This paper is mainly concerned about the field steering control and how to realize it with hardware and firmware.
2. 这是一个从抽象到具体的转换,分别在硬件、软件、固件、数据和工作者的一些组合中实现。
This is a transformation from the abstract to the concrete, with the realization partitioned in some combination of hardware, software, firmware, data, and workers.
3. 在下一个详细级别,团队开始在一些软件、硬件和固件还有系统工作者实体的组合中实现分析级元素和规格说明。
At the next level of detail, the team begins to realize the analysis-level elements and specifications in some combination of software, hardware, and firmware, as well as system worker entities.
4. 今天的更丰富的性能使服务和功能能够在硬件、固件、软件或者这三者的一些组合中被实现。
Today"s richer capabilities enable services and functions to be implemented in hardware, firmware, software, or some combination of the three.
5. 如果你实现了上述两点,你还需要一个控制每个二极管的驱动,这意味着需要更多的电路和固件。
Once you"ve got that, you also need a driver to control the individual diodes, which means additional circuitry and firmware.
6. XC10固件中的优化实现了3倍的性能提升。
Optimizations in the XC10 firmware have shown up to a 3x boost in performance.
7. 示例概念文件和BMCip地址perl脚本1 es - linuxclusterintro . zip 3 KB HTTP方案的实现如表1所示,在设置BMC固件ip地址时使用并不受支持的示例perl脚本。
Implementation of scheme depicted in Table 1, and an unsupported sample Perl script used when setting BMC firmware IP address.
8. 目前,很多五金产品的大部分功能是在产品发布以后,运用网络对产品的嵌入式软件——固件升级实现的。
Easy updates. Today, much of the functionality in many hardware products is accomplished through firmware — embedded software that can be updated over the Internet after a product ships.
9. 写固件的功能还没有实现,将来也不会实现。
Writing to the firmware is not implemented, and will not be implemented.
10. 阐述了系统的硬件、固件、设备驱动程序和应用软件的设计与实现方法。
This paper introduces the realization of the image sampling system in hardware, firmware, device driver and application software.
11. 在实际应用领域中,我们通常使用专用硬件、软件或固件来实现如asic、FPGA、DSP或智能卡等密码算法芯片。
Currently, in the practical application fields, we usually use specialized hardware, software or firmware to realize cryptosystems, such as ASIC, FPGA, DSP or smart CARDS.
12. 本文利用集成接口芯片EZ - US B在硬件及软件方面进行设计开发,实现了对心电信号的采集,并对电路设计和固件设计部分进行了详细说明。
This paper USES the EZ-USB integration interface chip to develop hardware and software, realizing the collection of ECG signal, and makes a detailed account for the designs of circuit and firmware.
13. 根据测试流程,给出了主机控制程序设计及部分实现代码,并针对开关矩阵硬件构成,分别给出了各个组成部分的固件程序代码。
According to test flow, the host program and its partial code are given, and according to the hardware structure of switch matrix, the firmware of each part is also given.
14. 洋细论述了系统的总体结构、部分硬件设计和相应固件程序的实现,给出了主程序和中断服务程序流程图。
Then, the whole systematic architecture, some hardwares and firmware program were detailed, finally, the main program and interrupt service program were provided.
15. 对嵌入式巡线仪中固件体系结构、GUI、数据结构、通信协议、程序进行了设计与实现。
The design of architecture of firmware, GUI, data structure, communication protocol, and program of the instrument of line patrol are presented in the thesis.
16. 介绍了USB2.0芯片配合FPGA共同工作的固件设计方法及各个工作模式的特性,实现了满足需要的固件设计和工作模式设置。
Studying firmware design method by USB2.0 CMOS chip working in collaboration with FPGA cooperation and per work model characteristic, Realizing reasonable firmware designing and working model.
17. 其中固件层主要基于89C2051单片机来探讨底层测控系统软件的实现;WWW.weNTIYi.COM
The firmware layer mainly discusses the realization of bottom layer in software based on 89C2051 SCM;
18. 本论文从硬件和固件两个方面详细介绍了基于USB技术的GPIB控制器的实现方案。
In this paper, the hardware and firmware of the USB-GPIB controller are mainly studied.
19. 尤其对有关usb通信的实现部分进行了详细地论述,其中包括USB固件程序开发与usb设备驱动程序开发。
Specially, it describes the key technology USB communication realization, which includes USB firmware develop and USB device driver develop.
20. 提出了一种用us b块传输方式进行实时信号数据采集的方法,并详述了采用EZ- USB芯片实现这种方法的软件及固件设计。
A method using USB bulk transfer for real time acquisition is proposed and the software and firm - ware design of this method using EZ-USB chip is intro - duced.
21. 单片机的固件程序设计部分主要介绍了固件的结构以及实现,HID类设备的开发及报告描述符的建立和ADS7843的采样程序设计。
MCU firmware design focuses on the structure and the realization of firmware, HID class devices developing, report descriptors establishment and ADS7843 sampling program design.
22. 软件设计主要是嵌入式系统的固件设计,包括实时操作系统(RTOS),实现MAC功能的程序,接口硬件C程序三部分。
The software part, which is also as firmware, mainly includes real time operating system (RTOS), MAC application program and C code for interface modules.
23. 提供了用于防止固件缺陷干扰逻辑时钟的计算机实现的方法和数据处理系统。
A computer implemented method and data processing system are provided for preventing firmware defects from disrupting logic clocks.
24. 介绍了AT 89s51和PDIUSBD12固件的特点,以及采用AT 89s51单片机结合PD IUSBD12和TLC2543芯片实现USB数据传输的硬件设计,对固件编程的具体实现给出了详细说明。
The hardware design using AT89S51 micro-controller and PDIUSBD12 and TLC2543 chips to achieve USB data transfer is carried out. And the firmware program design is introduced in detail too.
25. 我们目前还有一些问题仍然没有解决,诸如:目前还无法实现3.0固件与02.28基带之间的通讯,后者是黄雪能够工作的基带。
There are unresolved problems that we"re still working on. It"s currently impossible to get the 3.0 firmware to talk to baseband 02.28 where yellowsn0w lives, for instance.
26. 文中介绍了基于PDIU S - BD 12芯片的USB接口的硬件电路设计,并介绍了USB固件编程的实现。
In this paper, the hardware circuit design of USB interface based on PDIUSBD12 chip is introduced, meanwhile implement of USB firmware program...
27. 它所做的是努力捕获旗舰级智能手机的精髓:表现无可挑剔、软件贴心好用,固件质量一流,然后尽量降低价格,实现物美价廉。
What it does try to do is capture the essence of a flagship smartphone - impeccable performance, smart software and top-notch build quality - and squeeze it all into an affordable package.
28. 介绍了中继器固件的模块化设计方法,以及CAN模块初始化、双fifo转发等软件模块的具体实现。
The firmware of repeater is designed in modular design method. The key technology of CAN module initialization and dual FIFO transforming are discussed in detail.
29. 介绍了中继器固件的模块化设计方法,以及CAN模块初始化、双fifo转发等软件模块的具体实现。
The firmware of repeater is designed in modular design method. The key technology of CAN module initialization and dual FIFO transforming are discussed in detail.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
