词语导航
基本信息
词语：铝基合金
繁体：鋁基合金
拼音：lǚ jī hé jīn
英语翻译
【机】 aluminium base alloy
相关词条
1.aluminumbasealloy分词翻译
铝基的英语翻译：
【机】 aluminium base合金的英语翻译：
alloy; metal【化】 alloy
【医】 alloy
【经】 alloy
翻译例句
1. 是一家专业铸造锌基合金、铝基合金鞋模的厂家。
It is the manufacturer that a major casts model of shoe of zincic radical alloy, aluminium radical alloy.
2. 铝和铝基合金的铜焊是用铝—硅铜的合金来完成的。
Brazing of aluminum and aluminum-base alloys is accomplished with the aluminum-silicon brazing alloys.
3. 冷坩埚感应熔炼技术提高了钛铝基合金的熔体质量。
Distribution characteristic of magnetic field in cold crucible for induction melting;
4. 对于研究电解低钛铝基合金的细化机理提供了数值基础。
The modeling results can be used to investigate the grain refinement mechanism for the electrolytic low-titanium aluminium alloy.
5. 其中以铝基合金、铁基合金、高温合金及铜合金方面的研究最为活跃。wwW.WeNtIyi.Com
The most active research has been applied to aluminium, iron, copper based alloys and superalloy.
6. 某些金属合金，例如铝基合金，其密度低，可用于航空航天以节约燃料。
Some metal alloys, such as those based on aluminum, have low densities and are used in aerospace applications for fuel economy.
7. 目前常用的保护钢铁设备的牺牲阳极材料有铝基合金、锌基合金和镁基合金三大类。
At present, the sacrificial anode materials used for the protection of iron and steel, which are based of aluminum, zinc and magnesium alloy.
8. 试验研究了钛铝基合金离子渗碳后的渗层组织结构、渗碳温度和时间对渗层厚度、表面硬度的影响。
The surface hardness, carburized structure and thickness of the carburized layer on the TiAl-alloy obtained through the different carburization technologies was studied.
9. 箱体类主要部件（立轴箱、分动箱、卷扬机等）材质采用压力铸造高强度铝基合金替换原有普通钢材；
Box main components (vertical axle box, transfer case, hoist, etc. ) adopts the pressure casting of high strength aluminum alloy to replace the original ordinary steel;
10. 对铝基非晶合金的应用进行了评述。
The application of Al-based amorphous alloy was reviewed.
11. 铝基非晶合金的研究在最近些年得到了重视，这缘于人们对高强度低密度材料的需求。
The research of Al-based amorphous alloy is regarded in recent years because of the demand in high strength-low density materials.
12. 结合产品试验了高铝锌基合金的离心铸造工艺。
The centrifugal casting process of high aluminum-zinc alloys was investigated through products.
13. 利用挤压铸造技术生产高铝锌基合金直齿圆锥齿轮，齿面精度能够得到保证。
The high al, Zn base alloy conical gear with straight tooth in squeezing casting can ensure an accuracy of tooth face.
14. 对铝及铝合金在磺基水杨酸槽液中及另一有机酸槽中进行二次氧化，获得了装饰效果良好的瓷质氧化膜。
Aluminum and its alloy with decorate ceramic oxide coating were developed by secondary oxidation process in sulfa-salicylic acid bath and an organic acid bath.
15. 主要介绍了铝基非晶合金的研究历史、主要性能、制备、成型以及发展前景等。
This paper mainly introduces the D&R history, primary properties, preparation, manufacture and foreground of Al-based amorphous alloy.
16. 高铝锌基合金具有优良的力学性能、耐摩性能、机加工性能、以及密度小、熔点低、原材料来源丰富和成本低等优点。
The Zn-Al alloy has many advantages, such as good mechanical property, strong antifriction property, processable property, small density, low melting point, affluent raw material, low cost and so on.
17. 用原位合成法制备了纳米颗粒增强铝基复合材料，研究了复合材料微观组织、室温拉伸强度、塑性，并与基体合金进行比较。
Microstructure, plasticity and mechanical properties at room temperature of the nano particle reinforcement aluminum matrix composites fabricated by in situ reaction and matrix alloy were studied.
18. 利用该工艺在钢基表面上得到了不同配比的锌镍以及锌铝镍合金镀层。
By using this new process, Zn-Ni and Zn-Al-Ni alloy coatings with different proportions on steel substrate are obtained.
19. 本文采用无机盐料浆渗铝法，在K4104镍基铸造高温合金表面制备渗铝涂层。
At this paper, the aluminized coating on K4104 was prepared by pack cementation.
20. 如木材、玻璃、硬塑料、建筑材料、碳纤维、陶瓷、耐火材料、铜、铝基复合材料及镁锌合金等。
Such as wood, glass, hard plastic, building materials, carbon fiber, ceramic and refractory materials, copper, aluminum and zinc magnesium alloy composite material, etc.
21. 结果表明，镍基高温合金经电解渗铝后；其抗高温氧化性能和耐热腐蚀性能大为提高。
The results obtained have shown that the thus processed Ni-base superalloys possess both greatly enhanced oxidation resistance and highly improved hot-corrosion resistance.
22. 采用火焰原子吸收光度法直接测定铝合金中的铁时，溶液的酸度、共存的铝基及硅等元素严重干扰铁的测定。
The direct determination of iron in aluminum alloy with atomic absorption spectrometry is greatly interfered by acidity of solution, presence of aluminum and silicon elements.
23. 形状记忆合金增强的铝基复合材料的情况进行了介绍。
Especially, the shape memory alloy (reinforced) aluminium matrix composites have been introduced.
24. 本发明提供了一种高铝锌基合金磁化供料装置，属于合金制造技术领域。
A kind of magnetization charging equipment of high aluminium zinc group alloy, and it belongs to alloy manufactory field.
25. 高铝锌基合金是近年来应用日益广泛的价廉、节能、优质的新材料。
The high aluminum content Zn-based alloys are widely used because of the advantages of low cost, saving energy and high quality in the recent years.
26. 铝基牺牲阳极合金具有理论电容量大、电位适中、原料丰富等优点而普遍受到人们的重视。
Aluminum base anodes materials have been extensively researched for their advantages of high theoretical capacities, moderately potential and abundance.
27. 铝基钎料适用于铝合金、铝合金与不锈钢之间的钎焊。
It is applicable to the various brazing between aluminum alloy and aluminum alloy, aluminum alloy and Stainless steels.
28. 全文共分两部分，下半部分主要介绍在铁铬铝系合金、铁铬硅基系合金和非晶态铁基系合金特性研究方面的进步。
The paper includes two parts, and the focal point of this part is the Fe-Cr-Al, Fe-Cr-Si andnoncrystalline Fe alloy.
29. 通过气喷气冷法制取合金粉末，用压制后真空烧结的方法制备高铝锌基合金粉末冶金材料。
The alloy powder was produced by gas atomization. P/M material samples were made by pressing and sequent vacuum sintering.
30. 通过气喷气冷法制取合金粉末，用压制后真空烧结的方法制备高铝锌基合金粉末冶金材料。
The alloy powder was produced by gas atomization. P/M material samples were made by pressing and sequent vacuum sintering.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！