耐油性用英语怎么说,耐油性的英文翻译


词语导航

基本信息

词语:耐油性

繁体:耐油性

拼音:nài yóu xìng

英语翻译

【化】 oil resistance; oil-proofness

分词翻译

耐油的英语翻译:

【化】 oil proof

翻译例句

1. 极佳的耐油性、耐溶剂性、耐海水性。

Excellent solvent, oil and seawater resistance.

2. 良好的耐油性、水性、油、交替腐蚀性。

Good water, oil, alternating water and oil resistance.

3. 但抗拉强度较一般橡胶差且不具耐油性。

However, the tensile strength is worse than that of the general rubber and does not have oil resistance.

4. 具耐热,耐油性,防磨损,耐冷等特性。

Resistant to heat, oil, abrasion and cold.

5. 试验结果表明,该聚合物有较好的耐油性能。

The test results showed that the polymer has excellent oil resistant performance.

6. 有什么材料方案可帮助实现超高温耐油性能?

What are the material solutions that can help to achieve extra high temperature oil resistance performance?

7. 优良的耐热性,耐油性,耐低温及化学性能4。

Excellent resistance to heat, oil, cold, chemicals and solvents.

8. 其缺点是耐油性差,与极性物质不相容,不粘接等。wWW.weNTIyi.com

However, its disadvantages are poor oil resistance, incompatible with polar substance, and poor adherence to polar substance etc.

9. 优异的耐水性,耐化学性,耐油性,耐冲击性,耐磨性。

Excellent resistance to water, chemical, oil, impact and abrasion.

10. PA分散于基体EPDM中,大幅度提高了基体的耐油性;

That PA is dispersed in EPDM improved significantly oil resistant property of EPDM.

11. 具有极佳耐压性,耐腐蚀性,耐老化性,耐磨性及耐油性。

Outstanding resistance against pressure, corrosion, aging, abrasion and oil.

12. 这种复合热塑性弹性体具有优异的耐油性以及良好的力学性能。

The compound thermoplastic elastomer has excellent oil-resisting property and mechanical property.

13. 配合水性PU胶混合使用,增强接着力、耐热性、耐油性、耐水性等。

Used with water-based PUadhesive for increasing bonding strength, heat resistance, oil and water resistance.

14. 添加ommt之后,纳米复合材料的耐油性能和热稳定性能均显著提高。

OMMT could improve the thermal stability and oil resistance properties of nanocomposites obviously.

15. 对两种隔振垫的阻尼性能、阻燃性能、耐油性能与国外同类产品进行了比较。

A comparison is made between the two types of shims and imported equivalents with respect to the damping action, fire retardance and oil resistance.

16. 驱油试验时,对其发泡能力、稳定性与地层水的配伍性及耐油性进行了评价。

Its foaming capacity, stability, compatibility with formation water and oil resistance are evaluated in oil displacement test.

17. 结果表明,硫化剂TCY和硫黄用量对ACM 硫化胶的耐油性能影响不大;

The results showed that the addition level of TCY and sulfur had little effect on the oil resistance of ACM;

18. 重质碳酸钙可提高其耐油性,有机硅密封胶中的增塑剂在油类介质中会发生迁移。

The oil resistance could be improved by the addition of calcium carbonate. Plasticizer in oil media would migrate. It could be used as formed-in-place gasketing of mechanical part.

19. 新材料不仅具有耐油性,在耐高温性、耐疲劳性和抗永久变形性方面也有较大幅度的提高。

The new material is not only oil resistant, but also has fairly great improvement in performance of high temperature resistance, fatigue resistance and permanent deformation resistance.

20. 结果表明:炭纤维的加入能提高橡胶的硬度、耐热性及耐油性,但橡胶的扯断强度有所下降。

The results show that the presence of carbon fiber obviously enhances the hardness, heat resistance and oil resistance of the composite, but decreases the tear strength of the composite.

21. 本论文对用HAS固化剂配制耐油渗混凝土进行了探讨,展示了HAS固化剂的优良耐油性能。

Using HAS solidator to compound high Strength oil seep resisting concrete is studied in this paper. We Found that HAS concrete has fine oil seep resisting property.

22. 使共混胶料的耐油性、耐寒性、低压缩永久变形性能达到综合平衡,因此探讨了动态硫化工艺条件。

The dynamical vulcanization technique let properties of oil resistance, low temperature resistance and compression set of the blend turn into comprehensive equilibrium.

23. 胶料的硫化速度较快,强度较高,耐臭氧性能和耐介质性能较好:老化性能优良,耐油性能略有下降。

The aging speed, the strength of the hose, the chemical media resistance, and anti-ozone properties of the blend obtained improved significantly, but the oil resistance decreased slightly.

24. 通过增加各种添加剂,使聚氨酯鞋底在耐磨、耐油性、电绝缘、防静电和耐酸碱性能方面有了很大的提高。

By adding various additives, properties of new PU sole such as abrasion resistance, oil resistance, electric insulation, antis.

25. 考察了结构化控制剂种类、硫化剂种类及其用量对共聚氟硅橡胶SKTFT - 2 5耐油性能的影响。

The effects of the type of structurized control agent, type and content of curing agent on the oil resistance of the copolymerized fluorosilicone rubber SKTFT 25 were discussed.

26. 氯醇橡胶又称氯醚橡胶、表氯醇橡胶,具有极好的耐油性、耐高低温性和优异的化学稳定性,且气透性小。

Chlorohydrin rubber is also called epichlorohydrin rubber with good oil resistance, low and high temperature resistance and chemical stability, small air leakage.

27. 发泡聚丙烯(PP)材料具有质轻、可回收再利用、耐热性、耐化学和耐油性等优点,可用于汽车和包装等领域。

Polypropylene (PP) foams are widely used in the automotive and packaging industry, due to their advantages of light weight, recyclable, thermal resistance, chemical resistance, and oil resistance.

28. CR322经并用CM 140 B后,其混炼胶的加工性、压出表面及硫化胶的耐老化性及耐油性能不断得到改善。

Mixing by CR322 and CM140B, the workability of mixed rubber and thermal endurance performance and oil resistant performance of the surface and cured rubber are all improved.

29. 结果表明,随着NBR中结合丙烯腈质量分数的增加,NBR/PVC共混胶的耐油性能明显增强,力学性能也相应有所改善;

The oil resistance and mechanical properties of NBR/PVC blends were improved with the increase of mass fraction of acrylonitrile of NBR.

30. 结果表明,随着NBR中结合丙烯腈质量分数的增加,NBR/PVC共混胶的耐油性能明显增强,力学性能也相应有所改善;

The oil resistance and mechanical properties of NBR/PVC blends were improved with the increase of mass fraction of acrylonitrile of NBR.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!