真空铸造用英语怎么说,真空铸造的英文翻译


词语导航

基本信息

词语:真空铸造

繁体:真空鑄造

拼音:zhēn kōng zhù zào

英语翻译

【机】 vaccum casting

相关词条

1.vacuumpressingandcasting  2.suctioncasting  3.suctionmold  4.suctionmo(u)ld  

分词翻译

真空的英语翻译:

vacuum; void
【化】 vacuum
【医】 vacuum

铸造的英语翻译:

casting; foundry; mint
【计】 founding

翻译例句

1. 真空铸造。

Vacuum pressing and casting.

2. 通过采用真空压差铸造工艺,结合铸造型壳的制造,成功制造出金属零件。

Some metallic parts are successfully fabricated using a vacuum pressure difference casting technology and a casting mould shell technology.

3. 轮框是在一个有125度高温和6个气压压力下在真空焗炉铸造的。

The wheels are cured in an Autoclave at 125 degrees C and 6 bar of pressure.

4. 试验研究了反重力浇注条件下,铝合金消失模真空低压铸造的充型流动特性。Www.weNtiyi.com

Mold filling characteristics of Al alloy in vacuum lost foam low pressure casting (VLFLPC) under counter gravity condition were examined.

5. 得出了真空压差铸造法的最佳充型工艺参数。

Therefore, the optimum technologic parameters in vacuum differential pressure casting were obtained.

6. 对用真空差压铸造法生产的铝合金铸件性能进行了研究,从理论和实践量方面论述了其较好的铸件内在性能。

The internal quality of aluminum alloy castings that were produced by Vacuum Differential Pressure casting was studied with both theory and practice.

7. 通过正交试验,研究了各因素对真空实型铸造铸钢件涂料的透气性、干强度、剪切力、悬浮性的影响。

In this paper, the influence of various parameters on suspension shearing dry strength and permeability of EPC coating used on steel casting through right Angle test was studied.

8. 本文通过设计和选择真空实型铸造主要工艺装备,试验研究了所设计的真空实型铸造装备的工艺性能。

This paper is concerned with the design of vacuum full-mold casting equipment. The processing properties of this equipment are also studied in this paper.

9. 为了提高高温合金母合金锭的内在质量,提出了在高温合金真空熔铸的凝固过程,施加电磁搅拌的真空电磁铸造技术。

In order to improve the inner quality of superalloy master ingots, a technology of vacuum electromagnetic casting was developed for the superalloy, I.

10. 结果表明,尽管真空精炼具有很强的除气能力,但低压铸造的除气效果与压缩空气的相对湿度有关。

The results showed that although the vacuum smelting has strongly degassing capacity, the degassing effects is relevant to the relative humidity of compressed air in low pressure die casting.

11. 公司主要以真空冶炼、特种铸造为特色,产品以高纯铜铸件和高强度、高导电铜合金及耐磨铜合金为主。

Vacuum smelting company, Special casting for the feature, the product of high pure copper casting, high strength, high conductivity copper alloy and wear-resistant copper-based alloys.

12. 介绍了一种新的铸造技术——真空低压消失模铸造的工作原理。

A new expendable pattern casting (EPC) process, with vacuum and low pressure, was introduced.

13. 介绍真空泵叶轮的铸造工艺。

The foundry method of a large vacuum impeller was introduced.

14. 试验结果表明,砂型铸造铜套性能较差,而真空吸铸铜套性能较好,可以替代卷制铜套。

Result of testing shows that proPerty of sand casting bushing is unsatisfactory and that of vacuum casting bushing is better, which can be used to replace the pressed bushing.

15. 对不同保压压力下真空差压铸造试样致密度进行分析,探讨真空差压铸造工艺的凝固补缩特性,建立凝固补缩过程的数学模型。

Through analyzing the density of vacuum counter-pressure casting samples under different keeping pressures, their solidification feeding behavior and mathematical model were discussed.

16. 以高铬铸铁为参考材料 ,研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。

The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.

17. 分析了影响铝合金消失模真空低压铸造充型形态的主要因素。

The effects of key factors on filling behaviors of liquid Al alloy in the VLFLPC were analyzed.

18. 研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理。

The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.

19. 在制壳、模壳准备和大气熔炼以及真空熔炼产品铸造上方面有管理以及固定过程控制的经验。

Experienced in management and rigid process control of Shell making, Mold Preparation, and Investment Casting of Airmelt and Vacuum Cast products.

20. 试验结果表明,砂型铸造铜套性能较差,而真空吸铸铜套性能较好,可以替代卷制铜套。

Result of testing shows that proPerty of sand casting bushing is unsatisfactory and that of vacuum casting bushing is better, which can be used to replace the pre...

21. 用真空实型铸造法对涡旋压缩机动盘毛坯件进行了试生产。

The vorticity compressor parts were manufactured by the V-EPC process.

22. 用真空实型铸造法对涡旋压缩机动盘毛坯件进行了试生产。

The vorticity compressor parts were manufactured by the V-EPC process.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!