修正齿用英语怎么说,修正齿的英文翻译


词语导航

基本信息

词语:修正齿

繁体:修正齒

拼音:xiū zhèng chǐ

英语翻译

【化】 corrected tooth

分词翻译

修正的英语翻译:

correct; amend; blue-pencil; modify; retouch; revise
【化】 amendment
【经】 amendment; correct; correction

齿的英语翻译:

tooth; tine
【医】 dens; dent-; dentes; denti-; dento-; odont-; odonto-

翻译例句

1. 在定量分析了两者对齿轮精度的综合影响之后,运用反补偿法预先修正齿形凹模,并进行了齿模电极的设计。

Quantitatively analyzing the effect of two to the profile of tooth, the inversing compensation method is then put forward to modify the die cavity and the electrode is designed.

2. 测量齿顶圆直径估算分度圆螺旋角,用分度头在铣床上修正分度圆螺旋角,并进行误差分析。

The spiral angle of graduated circle was rough estimated by measuring the addendum circle diameter and modified on milling machine.

3. 基于微分几何和空间啮合理论,分析了修正型圆环面双包络环面蜗杆副齿面形成原理。

Analysis of the forming principle of tooth flank of modified type worm gear pair was based on different geometry and spatial engaging theory.

4. 本文的方法还可用来分析优化齿面的曲率修正参数,以及误差作用下的齿面接触情况。

Also this method can be used to optimize the parameters of modified worm gear drive and analyse the contact condition under errors.

5. 在获得齿轮内啮合传动的齿侧间隙计算公式以后,结合齿对刚度的计算公式,推导出齿轮内啮合传动的加载重合度及载荷修正系数。

After getting the formula about the normal backlash and the stiffness of the tooth pairs of the gear, the contact ratio and the load correction factor could be obtained.

6. 插齿刀的齿形角一般按齿形角修正公式来求,但此时的齿形设计误差不是最小。

Calculates the tooth profile Angle of pinion cutters with the corrected formula of tooth profile Angle. However, under this condition, the tooth profile designing error is not smallest.

7. 介绍了一种特殊齿形的内齿的电化学仿型加工,介绍了相关的工装夹具设计,工具阴极设计和修正以及加工工艺参数。

This paper introduces electrochemical copying method for inner teeth machining as well as clamping apparatus and the tool cathode design. In addition, the technological parameters are given.

8. 介绍了使用坐标法测量弧齿锥齿轮,并进行数据处理,以便对齿轮的加工参数进行修正的思路和方法。

This paper introduce a method of measuring spiral gear in coordinate system and deal with the data. The result of measurement can right guidance the machine"s parameter.wWw.weNTiyI.com

9. 实验验证了本文齿面误差修正模型及提出的TSVD法求解的正确性,提高螺旋锥齿轮齿面加工质量。

The error correction model of tooth surface and solving method using TSVD were verified experimentally, and the tooth surface machining quality of spiral bevel gear was improved.

10. 该方法已应用于东风汽车变速器齿轮齿形、齿向预修正的标准中。

This method has been applied successfully to drawing up and carrying out the premodifying standard of tooth profile and axial profile of the transmission gear of Dong Feng Motor Corporatio…

11. 该方法已应用于东风汽车变速器齿轮齿形、齿向预修正的标准中。

This method has been applied successfully to drawing up and carrying out the premodifying standard of tooth profile and axial profile of the transmission gear of Dong Feng Motor Corporatio…

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!