凝固试验用英语怎么说,凝固试验的英文翻译


词语导航

基本信息

词语:凝固试验

繁体:凝固試驗

拼音:níng gù shì yàn

英语翻译

【医】 coagulation butter

分词翻译

凝固的英语翻译:

be hard set; concreting; curdle; freeze; concretion; solidification
【化】 freeze; freezing; setting; solidification
【医】 clotting; coagulate; coagulation; set

试验的英语翻译:

experiment; test; try; try on; try out; examination; experimentation; trial
trial run
【计】 breadboarding
【医】 probation; test; tria
【经】 test; trial

翻译例句

1. 他在1793年就开始试验凝固光学图像。

He began experimenting to set optical images in 1793.

2. 该研究通过试验模型测量局部加压过程中金属型、铸件和加压杆的温度变化曲线,分析了传热与凝固现象。

The heat transfer and solidification change are analyzed by measuring the temperature change curves of metal mold, casting and pressurized bar in experimental model during local pressurization.

3. 为了实现轧辊的顺序凝固,设计了一套电磁半连续复合铸造试验装置。

In order to achieve progressive solidification for roll, the test equipment of electromagnetic hemicontinuous compound casting has been designed.

4. 在连铸生产中利用电脉冲孕育处理技术,开展改善和细化连铸坯凝固组织的试验研究。

The exploratory testing study of modifying and fining the solidification structure of concast steel billet is carried out in concast production by the technology of electro-pulse modification.

5. 对凝固型瓶装酸牛奶在发酵过程中出现部分溢奶问题进行了工艺对比试验,找到了解决问题的方法。

For the milk overflows problem of the bottled yoghurts in processing of fermentation, we proceeded the contrast experiments and found out the method of problem-solving.

6. 计算结果与试验结果基本吻合,表明该凝固模型能较好地模拟比重偏析现象。

The calculating result showed that it fit for the experiment result, and would simulate weightiness proportion segregation phenomena truly.

7. 通过不同冷却速率下的DTA试验研究了A357合金的凝固行为;

The solidification behavior of A357 alloy was analyzed by the DTA at various cooling rates.

8. 目的了解玻片法凝固酶试验在GPI卡鉴定金黄色葡萄球菌(SA)中的影响。

To study the influence of slide coagulase test on determining the staphylococcus aureus (sa) with GPI assay.

9. 试验结果得知,坯壳在结晶器内冷却不均,使坯壳凝固层厚薄不同,是铸坯产生表面裂纹的主要原因。

The present work shows that the nonuniform thickness of solidified skin of slab created by the nonuniform cooling rate of the skin in the crystallizer is main cause for slab surface cracking.

10. 进行黏度、凝胶强度、凝胶水析率、凝胶黏着力、凝胶凝固点及熔点测定等试验,以对比几种凝胶的性能。

The performances of three kinds of gels were compared by the experiments of viscosity, gel intensity, syneresis rate, adhesive power, gel freezing point as well as melting point and so on.

11. 根据试验结果和凝固理论,探讨了激光熔敷层的凝固过程。

According to experimental results and solidification theory of metals, the author analyses the solidification pro cess of the laser remelted coatings.

12. 试验结果表明,铸件在模拟环境下的冷却凝固时间比空冷凝固时间延长了300%。

The test result showed that cooling-solidifying duration of the casting under the simulation environment was lengthened by 300% compared with that of air cooling.

13. 实践证明采用均衡凝固收缩模数法设计液压试验平台浇冒口系统是可行的。

The practice shows that it is feasible to design kiss gating-feeder of hydraulic test platform by applying moduli calculation method.wWW.WENtiyi.Com

14. 铸件的凝固特性和组织直接影响铸件的力学性能,用计算机模拟和试验的方法研究了大高径比挤压铸件的凝固特性和凝固组织。

Solidification characteristics and microstructure of squeezing castings with large ratio of height to diameter have been investigated by numerical simulation and experiments.

15. 以a356合金作为实验材料,通过真空减压试验考察超声场对金属气体去除效果的影响,研究超声场对铝合金凝固组织的影响。

The effect of ultrasonic degassing under different time of A356 Aluminum alloy is studied by using vacuum decompress test, and the effect of ultrasonic field on the solidification microstructure.

16. 以蚂蚁蛋白、鲜牛奶为主要原料,采用保加利亚乳杆菌和嗜热链球菌作发酵剂,运用正交试验设计,对蚂蚁蛋白提取和凝固型酸奶加工工艺进行试验研究。

Extraction of ant protein and the process of set yogurt were studied, with ant protein and fresh milk as the main material, L.

17. 试验结果表明,豆乳在凝固超声衰减曲线上有一明显转折点即凝固初始点。

The result showed that there is a turn point on the ultrasonic attenuation curve.

18. 以大豆品种中农13为试验材料,研究不同浸泡条件、加热条件以及凝固条件对豆腐凝固质量特性的影响。

The soybean variety Zhongnong13 was used to study the effect of soaking, heating and coagulating conditions on tofu-gel strength and water-holding capacity.

19. 试验研究结果表明:超声信号的衰减与牛奶在凝固过程中的物理性能变化密切相关。

That is to measure changes in physical properties during milk coagulation process for defining the coagulation time and then the optimal cutting time of coagulum.

20. 与同样条件下的灰铸铁试验结果相比较,阐明了蠕墨铸铁不同于灰铸铁的凝固特点,解释了含磷蠕墨铸铁易产生缩松倾向的原因。

The solidification characteristics of quasiflake graphite cast iron different from those of grey cast iron are described with a comparison with the results of grey cast iron und…

21. 采用磁防蜡器经两年试验,效果虽好,但输油温度要控制在凝固点附近而不易做到。

Magnetic wax controllor test had been done for two years, although the result was good, to control the oil delivery temperature near the pour point was difficult.

22. 对采用4种不同铸造工艺方案的阀体铸件凝固过程进行了数值模拟及缺陷预测,获得了与试验相一致的模拟结果。

The numerical simulation of temperature field and shrinkage defect prediction for a valve casting, which was involved in 4 kinds of casting proces.

23. 对分离的菌株,用过氧化氢酶和血浆凝固酶试验后,用生化实验对菌株进行鉴定。

The strains were tested with catalase and coagulase tests, biochemical experiments were used to identify the strain.

24. 采用正交试验法,研究了A356铝合金控制凝固法工艺参数对显微组织的影响。

Effects of process parameters on microstructure of controlled crystallization method of A356 alloy are studied by using orthogonal arrays design in this paper.

25. 测温试验表明,冒口放在热节上,热节处的凝固时间延长80%;

The temperature measuring results show that in case that the riser is located on hot spot, the solidifications time of hot spot is prolonged by 80%.

26. 试验结果表明,母带和凝固层靠相互扩散形成固溶体而实现良好的冶金结合。

The results show that the mother sheet and the grown layer are bonded by diffusion forming a solid solution.

27. 通过定向凝固液淬试验和金相定量分析,研究了二元ZA2 8.4合金的微观凝固特性。

With directional solidification liquid quenching and definite quantity analysis of metallographic, this paper studied the micro solidification characteristic of ZA28.4 alloy.

28. 通过定向凝固液淬试验和金相定量分析,研究了二元ZA2 8.4合金的微观凝固特性。

With directional solidification liquid quenching and definite quantity analysis of metallographic, this paper studied the micro solidification characteristic of ZA28.4 alloy.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!