
词语导航
基本信息
词语:设计骨架
繁体:設計骨架
拼音:shè jì gǔ jià
英语翻译
【计】 design framework
分词翻译
设计的英语翻译:
design; devise; contrive; project; engineer; frame; plan; programming; scheme
【化】 design
【医】 project
【经】 projection
骨架的英语翻译:
framework; skeleton
【计】 frame work; skeleton
翻译例句
1. 我们设计应用程序的骨架,即架构。
We design the backbone of the application — the architecture.
2. 所以,当我们看到他的新书《疯狂特快》时都大吃了一惊。因为这本书里没有碳纤维骨架、没有突破性的设计,也没有替代燃料。
So, it comes as a bit of a surprise that his new book, The Lunatic Express, features no carbon fiber, no breakthrough designs or alternative fuels.
3. 天花板设计背后的理念——屋顶的骨架——展示了载体核心之美,而不是凭借任何装饰。
The idea behind the design of the ceiling - a kind of skeleton of the roof - was to show that the beauty of the carrier core is not closed to any decor.
4. 植入的人造气管是使用患者自身的干细胞在人造骨架上培育而成,支架由英国科学家帮助设计。36岁得病人经历了世界第一例实验室培育器官植入手术后,正在康复中。
The synthetic trachea was created by growing the patient"s own stem cells on an artificial "scaffold", which British scientists helped design.
5. 结合对两种类型沥青混合料路用性能的分析,提出了一种骨架密实结构沥青混合料的设计方法。
Combined with road performance analysis of two types of asphalt mixture, a design method for dense framework structured asphalt mixture was put forward.
6. 文中分析结果为帽型骨架剖面参数的优化设计和相关规范的修订提供了理论依据。
The results provide theory basis for the optimal design of section parameters of the cap - shape frame and the revision of relevant standard.
7. 除尘器骨架特点壳体旋风除尘器流型设计,能起局部旋风作用,减轻滤袋负荷。
Precipitator skeleton dust cyclone flow type characteristic shell design, can remove partial whirlwind role, reduce the filter bag load.
8. 针对数学形态学骨架化算法可能出现的多像素宽度情况,定义了端点、节点、尾支和毛刺等概念,在此基础上设计了一种分级毛刺去除算法。wWw.WEnTIYI.cOM
Aimed at the appearance of multi-pixels width of skeleton, this paper gave the definition of tip, node, tail and burr, and a design of an algorithm for iteration burr.
9. 方法首先设计了一种基于位编码和坐标变换的快速3D细化算法来提高提取器官骨架的运算速度;
Method A 3D thinning algorithm based on bit encoding and coordinates transform was designed to speed up the calculation of extracting the skeleton.
10. 简要介绍了异型线圈骨架注射模哈夫结构的设计和制造要点。
Design and manufacture points of injection mold of the special-shape coil skeleton were briefly introduced.
11. 利用基于有限元法的拓扑优化技术设计车身大骨架的拓扑结构。
The design of the body frame topologic structure is presented, using FEM-based topological optimization technique.
12. 分析了电流线圈骨架零件的结构特点及材料成型特点,介绍了该零件的注射模具设计方法。
After analysing the features of the structure of current coil skeleton parts and material formation, the paper introduces the injection die design method of this part.
13. 文章重点介绍合拢段受力分析与劲性骨架设计。
The article mainly presents the stress analysis and stiff skeleton design at the closure sector.
14. 介绍了低压开关柜的混装柜骨架设计。
The design of mix unit framework for low voltage switchgear was introduced.
15. 对于可促进组织生长的聚合物骨架材料的结构设计,必须同时兼顾材料的表面工程和结构工程,二者必不可少且不可分割。
Both the surface engineering and structure engineering are necessary and neither of them can be negligible to the design of polymer skeletal materials for tissue engineering.
16. 利用各有限元分析软件的特点进行了汽车座椅骨架改进设计,探索了汽车座椅轻量化的途径。
Optimization for the vehicle seat frame design has been conducted using the FEA software, which presents one efficient method for lightweight design of an automobile seat.
17. 本文的研究工作对企业在客车骨架设计、检验、改造和优化等方面具有重要的参考价值和指导意义。
The research of this thesis has instructive effect and important meaning for the design, checking, rebuilding and optimizing of the bus frame for the enterprise.
18. 三嵌段共聚物P123,F127被选择作为超分子模板用以设计和构筑微-介孔多级孔道金属-有机骨架。
Triblock copolymers P123 and F127 were also chosen as supramolecular template to design and construct hierarchically micro-and mesoporous metal-organic framework.
19. 依据长寿命路面的设计理念,研究骨架密实型多碎石沥青混合料性能。
Based on the concept of long-life pavement, performance of skeleton dense-graded stone asphalt mixtures are researched.
20. 结论采用均匀设计法优选的配方组成符合骨架控释型透皮给药系统的要求。
Conclusion the prescription composition optimized by uniform design meets the requirement of skeleton-controlled transdermal delivery system.
21. 淡雅型白酒的酒体设计上应降低骨架成分的含量,相应地增加复杂成分的含量和种类。
The contents of bone compositions in liquor body design should be reduced and the contents and varieties of complex compositions should be increased correspondingly.
22. 对于高端的运动自行车,车架相当于人体的骨架,是自行车设计最重要的部分。
A bicycle frame is to a high-end bike what a skeleton is to a body, and it is also the most important part of bicycle design.
23. 骨架类型的楼梯是考虑了线性和木材结构而设计的。
The staircase is skeleton type that is designed in consideration of the linearity and the timber structure.
24. 以菊酯为骨架,采用组合平行法,设计合成了新型含氮杂环的菊酯类化合物库。
A new nitrogen-containing heterocyclic pyrethroid library was designed and constructed using combinatorial parallel synthesis.
25. 介绍了氟橡胶外露骨架油封的新式结构、配方设计、生产工艺及产品性能。
The formulation design, production process and product property of outer-framework oil seals of FKM were introduced.
26. 在设计汽车骨架等薄壁点焊结构时,必须对薄壁构件焊点的疲劳强度进行精确评估。
In the design of thin-walled spot welding structures such as the automobile body structure, it is necessary to evaluate the fatigue strength of spot welding at the good accuracy.
27. 在设计汽车骨架等薄壁点焊结构时,必须对薄壁构件焊点的疲劳强度进行精确评估。
In the design of thin-walled spot welding structures such as the automobile body structure, it is necessary to evaluate the fatigue strength of spot welding at the good accuracy.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
