
词语导航
基本信息
词语:胶树脂
繁体:膠樹脂
拼音:jiāo shù zhī
英语翻译
【医】 gum resin; gum-resin
分词翻译
胶的英语翻译:
glue; gluey; mucus; pastern; sticky
【医】 gloea; glue
树脂的英语翻译:
colophony; pitch; resin; rosin
【化】 resin
【医】 peucine; pitch; resin; resina
翻译例句
1. 对脲醛树脂胶的贮存稳定性随p H值的变化进行研究,以指导生产,提高产品的适用。
The storing stability of urea formaldehyde resin adhesive with the change of PH value is researched in attempt to guide the production and imporove the application for products.
2. 然后,我与他们慷慨涂层超级胶(环氧树脂还要罚款…它只是需要更长的时间),包括他们蜡纸,并钳制他们使用的一种形式我将木材。
Then I generously coated them with super glue (epoxy would also work fine... it would just take longer), covered them with wax paper, and clamped them in using a form I cut from wood.
3. 对在不同工况下使用的玻璃钢产品,其纤维和树脂胶的选用提出了看法。
Some discussions are made in the choice of fibre and resin for fibre glass product manufacture under different conditions.
4. 对在不同工况下使用的玻璃钢产品,其纤维和树脂胶的选用提出了看法。
Some discussion are made in the choice of fibre and resin for fibre glass product manufacture under different conditions.
5. 采用非等温差示热量扫描DSC曲线方法探讨了竹材液化物酚醛树脂胶不同物质的量之比时的固化反应过程。
The curing reaction process of bamboo liquefaction phenolic resin with different molar ratio was studied by non-isothermal differential scanning calorimetry(DSC).
6. 用复合催化剂和先进缩聚工艺制得的快速固化酚醛树脂胶具有低毒和快速固化的优点。
Fast-curing PF resins with low toxicity and fast curing were prepared by using complex catalyticagent and advanced technology.
7. 人造板工业使用的三大胶是脲醛树脂胶、酚醛树脂胶和三聚氰胺-甲醛树脂胶。
The three main adhesives for artificial plate are urea-formaldehyde resin adhesive, phenolic-formaldehyde resin adhesive and melamine-formaldehyde resin adhensive.
8. 研究了用腰果油部分替代苯酚制备腰果酚醛树脂胶的最佳反应条件。
The optimum reaction conditions for preparing cashew phenol aldehyde resin adhesive by cashew oil instead of phenol aldehyde were investigated.
9. 降低人造板甲醛释放量的关键在于使用低游离甲醛树脂胶。
Mole ratio is the key factor that influenced the formal de hyde content of urea resin.
10. 三聚氰胺、尿素与甲醛经羟甲基化、醚化反应,生成甲醚化六羟甲基三聚氰胺和甲醚化羟甲基脲复合树脂胶。
Melamine, urea and formaldehyde underwent hydroxymethylation and etherification to yield a composed resin glue of methyl-etherified hexahydroxy methylmelamine and methyl-etherified hydroxymethylurea.
11. 本文是在实验室条件下,探索三聚氰胺树脂胶胶结此种复合板工艺的工艺技术。
This essay explore the making processing of this composite board with melamine resin under lab conditions.
12. 本文叙述了双环氧树脂胶研制,并确定出最佳工艺方法。
In this paper, the principles and method of dual-epoxy resin are discussed, the optimum technological process has been given.
13. 弱酸性条件下合成脲醛树脂的工艺不仅能降低生产成本,还能生产性能优异的脲醛树脂胶黏剂。
The synthetic technology of UF resins under weak acidity condition could reduce the production cost and produce UF resin adhesive with excellent performances.
14. 结果表明树脂型AKD胶具有更高的阳电荷密度、更长的有效贮存期和更好的施胶效能,且不易霉变。
The result shows that the AKD size emulsified with cationic resin has higher charge density, longer storage life and better sizing efficiency, and also no susceptibility to moulds.
15. 我曾尝试过用水调成的催化粉胶,也曾尝试过双组份环氧树脂胶、酪蛋白乳胶、胶泥、水胶以及新型超强力胶。
I"ve tried the two part epoxies, white casein-based glue, contact cement, hydro glue and the new super-glues.
16. 对一种新合成的石油树脂施胶剂在漂白硫酸盐木浆中进行了应用实验。
The application of a novel petroleum resin sizing agent in the bleached sulfate wood pulp was studied.
17. 本文根据生产实践,讨论了喷涂用胶衣树脂所应具备的特性。
Based on practice, characteristics of coating resin for spray-up process are discussed in this paper.
18. 本文论述了石油树脂施胶剂的研制原理、方法及在施胶工艺中的应用。
This paper discuss the petroleum resin sizing agent about its prepare principle, method and application in sizing technology.
19. 研究了用竹焦油部分替代苯酚合成酚醛树脂胶黏剂,并对其性能进行分析。
The technique for preparing phenol-formaldehyde resin adhesive from bamboo tar and its characters were studied and analyzed.
20. 本文对耐水型胶衣树脂的合成工艺和性能作了介绍。
This paper introduces synthesis technology of water resistant gel coat resin.
21. 本文对竹胶板模板用脲醛树脂胶的生产工艺和配方试验研究做了介绍。
This artical presents the productive technology and formulae of urea-formaldehyde resin used in bamboo mould plate.
22. 结果表明,预混合工艺能提高聚酯树脂的施胶效率。
The results show that the premixing process improved the polyester sizing efficiency.wwW.wEnTIyi.com
23. 环氧树脂是聚硫密封胶常用的增粘剂,在聚硫密封胶中加入环氧树脂可以起到明显的增粘作用。
Epoxy resin is the common tackifier for polysulfide sealant. Adding epoxy resin into polysulfide sealant can exert an auxiliary effect on viscosity increasing.
24. 以甲基丙烯酸甲酯为硬单体,丙烯酸丁酯为软单体,丙烯酸为功能单体,环氧树脂为改性剂制备了密封胶用环氧改性丙烯酸树脂。
The epoxy modified acrylate resin for sealant is prepared with methyl acrylate as hard monomer, butyl acrylate as soft monomers, acrylate acid as functional monomers and epoxy resin as modifier.
25. 本文描述了脲醛树脂胶指接材的强度性能。
This paper describes intensity property of joined timber with urea-formaldehyde resin.
26. 实际试用结果表明,该树脂不仅适用于喷涂、手糊成型工艺要求,而且是良好的模具胶衣树脂。
The resin is not only suitable for spray up and hand lay-up processes, but also a good kind of gel coat resin for mould making.
27. 复膜胶、白乳胶、压敏胶、尿醛胶、乙醇稀料、建筑胶、大力胶、双组份胶、呋喃树脂胶等类制造。
Fumo plastic, white latex, pressure, urine aldehyde plastic, ethanol diluted materials, construction plastic, strong plastic, Shuangzufen plastic, furan resins such as plastic manufacturing.
28. 复膜胶、白乳胶、压敏胶、尿醛胶、乙醇稀料、建筑胶、大力胶、双组份胶、呋喃树脂胶等类制造。
Fumo plastic, white latex, pressure, urine aldehyde plastic, ethanol diluted materials, construction plastic, strong plastic, Shuangzufen plastic, furan resins such as plastic manufacturing.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
