零轴用英语怎么说,零轴的英文翻译


词语导航

基本信息

词语:零轴

繁体:零軸

拼音:líng zhóu

英语翻译

【电】 null axis

分词翻译

零的英语翻译:

zero; nought; fractional; nil; nothing; wither and fall
【计】 Z; zero
【医】 zero

轴的英语翻译:

axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core

翻译例句

1. 这交越失真看起来像一个档次,或扁平点,在正弦波作为穿越零轴。

This crossover distortion looks like a notch, or flat spot, in the sine wave as it crosses the zero axis.

2. 这种类型的方法不能解释或峰之间的拉伸应变水平不恢复到零轴之间的多个压缩的压力。

This type of approach cannot account for compressive strains between tensile peaks or strain levels that do not recover to zero between multiple axles.

3. 不同的是不精确的设置传统鞋的,在每三个关键脚的鞋的零轴调整,可以设置或更改,而不影响其他两个调整立场。

Unlike the inexact set-up of traditional cleats, each of the three critical foot-axis adjustments of Zero cleats can be set or changed without affecting the position of the other two adjustments.

4. 注意:在垂直轴上,两条线使用了不同的刻度,并且工资刻度的起始点不是零。

Note that the two lines use different scales, shown on the vertical axes, and that the scale for wages does not start at zero.

5. 如果取一个有旋的向量场,流体流动方向是环绕某个坐标轴的,那么就会发现它的散度是零。

And, if you take a vector field where maybe everything is rotating, a flow that"s just rotating about some axis, then you"ll find that its divergence is zero.

6. 修改后的应用程序沿着x轴零点的线条非常短,而以前的应用程序的线条则又长又高。

The new version of the application is the extremely short line running along the X-axis at zero, while the previous version is the longer higher line.

7. 在理想状态下,那条燃尽线会在sprint结束时,或是结束前与x轴相交,表示剩余工作为零。

Ideally, the chart is trending down such that it will hit "zero work left" at or before the end of the sprint.

8. 在加工端面、圆弧、圆锥以及蹊径直径相差较大的零件时,沿X轴方向进给时,固然进给速度不变,但切削线速度却不断地变化,导致加工表面质量变化。

In the end, arc, processing and ground is large diameter conical parts, along the X axis into to, is the same, but the linear cutting speed is constantly changing, the cutting surface quality changes.

9. 广泛用于零部件的压装成型、拉伸、弯曲、打孔、压印,轴类零件的校正和压装等。

Widely used in parts of the press-fit shape, stretching, bending, punching, stamping, shaft alignment and press-fit etc.

10. 针对这一问题,本文研究了零件加工误差对动模板合模位置的影响,得出了零件加工误差的许用值范围,并计算了由于销轴摩擦力对合模力放大比的影响关系式。

Aiming at these problems, this paper studies how the original error affects the accuracy, works out its allowable values, and finds out the equation between friction of pins and clamping force.

11. 开发了能实现复杂曲面零件电火花线切割加工的多轴联动加工系统。

In this paper, the motion rules of multiple spindle linkage motion in machining complex ruled curved surfaces by WEDM was analyzed.

12. 主动车轮轴是钢坯运输车的关键零部件,采用结构有限元分析软件ANSYS分析了该轴的应力和变形。

The driving wheel"s axle is a key parts of the billet transport vehicle, so the axle"s stress and deformation were analysed by the structure finite element analysis software ANSYS.

13. PWF主要由泵盖、泵壳、叶轮、轴封、轴、和托架等零部件组成。

PW, PWF mainly by the pump cover, pump casing, impeller, shaft seal, shaft, and bracket the composition of such components.

14. 齿轮零件组安装非常容易,可以搭配传动轴完成工作卡上的图案。

It is to complete the colourful pictures on the inserted working card.

15. 这两种方法适合大型轴类零件的表面强化和修复。

These two methods can be used to strengthen and repair surface for large-scale axis parts and bore of bearing.

16. 在这样情况下方位陀螺的输入轴是处于垂直位置,同时摆锤单元在零位。

The input axis of the azimuth gyro under this condition is vertical, and pendulum unit is nulled.

17. 首先,本人设计的零件为轴,它的作用是起到传动作用,传动力的方向和轴力。WWW.weNTIYi.Com

First, I designed components for the shaft, and its role is to drive, Chuan dynamic direction and axial force.

18. 首先,本人设计的零件为输出轴,它的作用是传动作用,传动力的方向和轴力。

First, I designed components for the output shaft, and its role is to drive, Chuan dynamic direction and axial force.

19. 通过车铣和车削两种加工方法的对比,重点研究了切削深度对微细轴类零件加工精度的影响问题。

Contrast the two machining method between turn-milling and turning, research the effect on machining precision of micro-shaft parts about cutting depth.

20. 花键轴是机械中广泛使用的重要零件之一。

The spline shafts is a important part of the machine.

21. 本程序实现一个实例化的长轴类的零件数控加工编程。

An example of this program category of the long axis CNC machining of parts programming.

22. 所有轴类零部件均采用优质45号钢材调制处理加工而成。

All axis adopt high quality parts are all 45 steel modulation processing and processed.

23. 为了解决这一难题和满足生产需要,我们进行了大型轴类零件形位误差自动测量仪的设计。

To settle this problem and meet productive demand, we have carried out the design of automatic instrument for measuring form and position deviations of large axles.

24. “冷拉伸滚压”技术是一种新的轴类零件塑性成形的加工方式。

"Tension-Assisted cold rolling" technology is a new plastic forming method of shaft parts.

25. 本文利用振动分析理论和数学物理方法对音频检测轴类零件的数学模型和振型曲线进行研究。

This paper studied mathematical mould and vibration curve, it used vibration analysis and mathematics and physical method, and used sonic testing of axles, too.

26. 通过研究引信和钟表小轴类零件基于知识和实例的表示方法,建立了面向对象的零件几何、工艺特征信息描述方法。

Studying representation method of fusee and small spindle part of the case-and-knowledge-based, the described method of objected oriented of geometry feature and process feature information is built.

27. 端面拔动顶尖是我厂设计,开发和制造的机床附件,主要用于加工轴尖零件。

Constant face dirver is a dind of new type machine tool accessory designed and produced by our factory.

28. 介绍了用在通用压力机上成形小型轴类零件的一种新型切断、冷镦自动送料连续模的结构形式、工作原理和设计要点。

A description has been made on a structure and principle of progressive die used on a general press for shear, upsetting and automatic feed used for forming small axial parts.

29. 介绍了用在通用压力机上成形小型轴类零件的一种新型切断、冷镦自动送料连续模的结构形式、工作原理和设计要点。

A description has been made on a structure and principle of progressive die used on a general press for shear, upsetting and automatic feed used for forming small axial parts.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!