
词语导航
基本信息
词语:双扭的
繁体:雙扭的
拼音:shuāng niǔ de
英语翻译
【计】 twisted
分词翻译
双的英语翻译:
both; double; even; twin; two; twofold
【化】 dyad
【医】 amb-; ambi-; ambo-; bi-; bis-; di-; diplo-; par
扭的英语翻译:
gnarl; turn around; tweak; twist; wrench; wrest; wrestler; wring
【化】 twist
【医】 stropho-
翻译例句
1. 以此为理论基础,开发出了简明实用的双横臂扭杆悬架系统刚度和阻尼参数非线性分析与设计软件。
Based on the above study, a useful software for analyzing and designing the rigidity and damping parameters of the suspension system is developed.Www.wENTiyi.COm
2. 根据虚位移原理计算得到了扭杆弹簧双横臂悬架的非线性悬架刚度与车轮跳动的函数关系。
The function of the nonlinear suspension stiffness with tire skipping distance was obtained by virtual displacement theory.
3. 可控选择的线圈包括:无包装管路,圆锥形和双扭型线圈。
Coil options include bare tubing, cone shaped, and double wrap coil.
4. 针对边条弯扭及改变双立尾展向位置对全机纵横向气动特性的影响进行了试验研究。
An experimental study of the effects of the twin vertical fins position and twist strake wing on a fighter aerodynamic characteristics was performed in the wind tunnel.
5. 对汽车动力传动系双质量飞轮式扭振减振器的选型和设计具有一定的参考价值。
This research can provide the base to select and design vehicle powertrain system of dual mass flywheel type torsional vibration damper.
6. 本文根据砼的双轴强度特性,导出了预应力受扭构件抗裂度提高系数的表达式。
The expression of coefficient of increase in cracking resistance in prestressed torsional members is derived on the basis of concrete characteristics under biaxial strength.
7. 对汽车动力传动系双质量飞轮式扭振减振器的选型和设计具有一定的参考价值。
The elastic characteristic and torsional stiffness of four kinds of typical dual mass flywheel type torsional vibration damper is analyzed in detail.
8. 其次,在双质量飞轮设计模型的基础上,分析了双质量飞轮转动惯量系数、扭转刚度、变速器与系统扭振频率的关系。
Secondly, the relationship between rotary inertia coefficient, torsional stiffness, transmission gearbox and torsional vibration frequency is analyzed on the basis of the design model.
9. 双台肩钻具接头可大幅度提高钻具的抗扭强度。
The torsional strength of the drilling tools can be greatly increased by using the double shoulder tool joint.
10. 首先,根据汽车动力传动系统的扭振当量原则与方法,分别建立了怠速工况与正常行驶工况下发动机、双质量飞轮以及传动系统的无阻尼多自由度扭振当量模型。
First of all, the two undamped multi-freedom torsional vibration models of DMF under idling and driving condition are built based on the principles of vehicle power train equivalent torsional model.
11. 4英寸)钻铤NC35螺纹加工LE螺纹、应力槽、双台肩后进行了实物抗扭性能试验,证实双台肩钻铤具有很好的抗扭性能。
After processing LET thread, stress groove and double shoulder connection for the NC35 thread of Drill Collar in 43/4 inch, torsion tests were done.
12. 三枚中空双头螺纹加压钉比三枚实心螺纹钉、三翼钉在抗压、抗弯、抗扭强度和刚度上占有一定的优势。
The 3 hollow double heads compression screw appear to offer distinct advantage over the 3 solid screw, trifin in the against pressure, against bending force, torsional strength and torsional rigidity.
13. 本文采用两种实验方法对比测量可知通常的导线连接其接触点的电阻,并由此进行分析,阐述在双电桥测量低电阻实验中四端扭接法的必要性。
Henceforth, the article analyzes the necessity of the mode of the 4-terminal connection in the experiment of low resistance measurement using the double bridge.
14. 分析载体线振动和角振动所引起的干扰作用,并对几种扭杆轴不相交的单环和双环调谐陀螺方案给出理论分析和评价。
The disturbing torques associated with the lineal and angular vibration of gyro"sfoundation are derived. It gives also the theoretical analysis and evaluation of somedesigns of single-gimbal or…
15. 分析载体线振动和角振动所引起的干扰作用,并对几种扭杆轴不相交的单环和双环调谐陀螺方案给出理论分析和评价。
The disturbing torques associated with the lineal and angular vibration of gyro"sfoundation are derived. It gives also the theoretical analysis and evaluation of somedesigns of single-gimbal or…
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
