总线报文用英语怎么说,总线报文的英文翻译


词语导航

基本信息

词语:总线报文

繁体:總線報文

拼音:zǒng xiàn bào wén

英语翻译

【计】 bus message

分词翻译

总线的英语翻译:

【计】 B; bus

报文的英语翻译:

【计】 message

翻译例句

1. CAN总线报文传输用时间触发操作解决网络拥塞。

The congestion of network is solved preferably using time-triggered operation in the communication of CAN protocol.

2. 通过分析CAN总线报文延迟产生的原因,建立了报文延迟时间的数学模型。

Establishmented the mathematical model of delay time of CAN bus messages, by analyzing the causes of messages delay.

3. 分析了CAN总线标准的网络拓扑结构、报文帧格式,并对标准帧和扩展帧进行了比较。

This paper analyzed topology and message frame types of CAN bus and compared the standard frame format and extended frame format.

4. CAN总线上的智能节点是网络上报文的接收和发送站,一般由单片机和可编程的CAN通信控制器组成。

The smart node on CAN field-bus is the transmit or receive station of messages. It is mainly combined with micro-controller and programmable CAN controller.

5. 虚拟仪表筛选、分析、判断并显示各测控模块发给总线的报文。

Virtual instruments select, analyze and judge, display messages sent by each test module.

6. 简要介绍了CAN总线的一些基本概念和基本组织规则,详细阐述了CAN总线的报文、帧格式,错误类型以及检测错误能力。

It"s basic concept and organizing rules and particularly represents the message, picture format, error style and checking error ability in CAN Bus are simply introduced.

7. 根据报文传送延时模型,分析了CAN总线的传输净延时和MAC访问机制。

According to a message transmission delay model, CAN bus transmission neat delay and MAC access mechanism were analyzed.

8. 一旦响应报文准备好了,那么就立即请求总线,把报文发送出去。

As soon as the response packet is ready, the bus is requested, and the packet is sent.

9. 文章从分析CAN总线协议入手,通过计算CAN总线的总线负载率,得出单个CAN总线传输报文帧的上限值。

Based on the analysis of CAN bus protocol, this paper obtains upper limit of frames in a single CAN bus through calculating its busload.

10. 利用CAN总线数据帧的标识码设置传输报文的优先级,通过设计优先级晋升算法来改善多轴嵌入式数控系统报文数据通信的实时性和有效性。

The key design techniques of CAN interface were discussed. The priority of the transmitting message was set in terms of the identification code of CAN frames.

11. 文章通过CAN总线在数控测井仪中的应用过程,给出了CAN总线的硬件连接,波特率计算,软件初始化及报文信息的收发初始化,介绍了CAN总线的使用方法。

Through the application of CAN bus in digital Control Logging system, the paper describes the hardware composition, introduces the calculation of baud rate and Software initialization.

12. 详细的介绍了CAN通讯协议准的拓扑结,制定了CAN总线应用层协议的通讯报文形式。

The CAN bus communication protocol was explained and the form of the communication message is established on application layer.

13. 然后介绍了CAN总线的协议规范,根据其介质访问控制方法,详细地分析了CAN总线上报文延时产生的原因。

And then explains CAN protocol precisely. According to the media access controlling method of CAN protocol, the reason of delay time was discussed.

14. 重点分析了CAN总线传输报文的特点,设计了适用于井下分站的传输协议。

The CAN bus transmission characteristics of packet are mainly analyzed, and transport protocol for the sub-station in the coal mine is designed.

15. 在数据通信方面,提出了由总线控制器与报文收发器构成的CAN总线接口电路,并详细论述了与总线接口初始化、总线中断处理、总线数据收发相关的设计实现过程。

For the purpose of data communication, the paper lodges the CAN interface circuit, and expatiates the programs of bus initialization, bus interrupt service routing, receiving and sending bus data.wWW.WentiYI.coM

16. 安全现场总线的概念要求报文发送的实时性,任何任务都要在截止时间内完成。

The Safety FieldBus requires high real-time performance that means any transmission must be finished before deadline.

17. 分析了B码的对时机理,指出变电站的智能设备采用B码对时,就不再需要现场总线的通信报文对时,也不再需要GPS输出大量脉冲接点信号。

The synchronization principle of IRIG-B code is analyzed. When applying IRIG-B code in substation IED, neither communication messages of fieldbus nor multiple pulse signals of GPS are needed.

18. 分析了B码的对时机理,指出变电站的智能设备采用B码对时,就不再需要现场总线的通信报文对时,也不再需要GPS输出大量脉冲接点信号。

The synchronization principle of IRIG-B code is analyzed. When applying IRIG-B code in substation IED, neither communication messages of fieldbus nor multiple pulse signals of GPS are needed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!