高温腐蚀用英语怎么说，高温腐蚀的英文翻译

词语导航

基本信息

词语：高温腐蚀

繁体：高溫腐蝕

拼音：gāo wēn fǔ shí

英语翻译

【化】 corrosion at high temperature; high temperature corrosion

相关词条

1.hightemperaturecorrosion  

分词翻译

高温的英语翻译：

high temperature
【医】 hyperthermia; hyperthermy

腐蚀的英语翻译：

canker; corrode; corrupt; decadent; degenerate; erode; erosion; cauterization
corrosion; corruption; degeneration
【计】 corrosion; erosing
【化】 corrosion
【医】 causis; causticize; corrode; corrosion; decay; diabrosis; erode; erosio
erosion; exesion

翻译例句

1. 利用自制装置做了非晶的水蒸气腐蚀和高温腐蚀实验。

Experiments of steam corrosion and high temperature corrosion have been done using a self-made device.

2. 用石英弹簧检测试样腐蚀增重，以测定高温腐蚀动力学。

The corrosion kinetics of the alloys was determined by monitoring weight changes of alloy specimens with a quartz spring .

3. 锅炉受热面的高温腐蚀常常会导致炉管爆裂，引发锅炉故障。

High temperature corrosion of heating surface of a boiler often leads to burst of boiler? Tube, it initiates boiler failure.

4. 奥里油中含钒量较多，是锅炉预防高温腐蚀设计中的大难题。

The large amount of vanadium in Orimulsion may cause unexpected problems in the prevention of high-temperature corrosion of furnace.

5. 详细介绍了多切圆燃烧技术在解决锅炉水冷壁高温腐蚀中的应用。

The application of multi-tangential firing technology to settling the high temperature corrosion of water wall tube of boiler is introduced in detail.

6. 采用高温熔盐灼烧法研究t 2钛合金高温腐蚀动力学及腐蚀行为。

High temperature corrosion kinetics and corrosion behavior of T2 Titanium alloy were studied by oxidizing in melting salt.

7. 结果表明，研究不锈钢合金系统的超高温腐蚀行为十分必要和迫切。

The results show that it is necessary and urgent to research the super-temperature corrosion behavior of the stainless steel alloying system.

8. 硬面楔塞阀可用于高温腐蚀或侵蚀蒸汽和油，或者石油蒸汽应用领域。

Wedgeplug valves with hard facings are recommended for high temperature corrosive and erosive steam and oil or oil vapor services.

9. 对两种材料锤头失效的分析，确定了材料的洁净程度对高温腐蚀影响。

Thanks to the failure analysis of the hammers made of two different kinds of materials, it is certain that the cleanness of materials plays a great impact on the high-temperature corrosion.

10. 并指出高温腐蚀及腐蚀速率与受热面上的结灰具有腐蚀性及管壁温度有关。

The paper also points out that the corrosion at high temperature and the corrosion rate are related to the corrosiveness of fuel ash accumulated on heating surface and the temperature of tube wall.

11. 的燃煤锅炉的水冷壁的高温腐蚀会造成重大的损害的可靠和经济运行的锅炉。

A high temperature corrosion in water-wall of a coal-fired boiler will cause a significant damage to the reliable and economical operation of the boiler.

12. 对锅炉燃烧调整，控制硫污染物排放，防止水冷壁高温腐蚀有一定的指导意义。

There is some action on organizing combustion in boiler, controlling the sulfur emission and preventing high temperature corrosion of water-wall tubes.

13. 对渗铝及硅和其它元素的共渗层的制备工艺及其抗高温腐蚀机理进行了详细讨论。

The preparation of Al, Si and other elements co-diffusion coating and the mechanism of its high-temperature corrosion resistance were went into details.

14. 介绍了新开发的几种在高温腐蚀环境下使用的电站锅炉管和乙烯裂解管的主要特性。

The basic characteristics of several newly-developed power plant boiler pipe and ethene cracking pipe used under high-temperature and strong corrosion conditions are presented.

15. 利用配煤技术适当降低燃煤硫分、改善烧煤特性可成为解决锅炉高温腐蚀的一条重要途径。

Properly lessening sulfur content, and improving combustibility by coal blending technology may become the significant approach to resolve the corrosion.

16. 通过进行燃烧调整和设备改进等方面的工作，经过一年的运行考验，未发现新的高温腐蚀。

Through combustion adjustment and equipment improvement etc. works, one year of operation practice showed that no...

17. 高温防护涂层在防止航空涡轮发动机抗高温腐蚀以及延长发动机寿命方面起着越来越重要的作用。

The high temperature protection coatings play an important role for preventing high temperature oxidation and hot corrosion from aircraft turbine engine and prolonging the time life of engine.

18. 纳米结构涂层经过盐腐蚀或高温腐蚀后纳米晶粒明显长大，并出现微小的晶格变化及相转变现象。

After salt and high temperature corrosion, the growth of Nanostructure crystalline size and phase transformation are observed.

19. 但是，目前人们对高温腐蚀的研究局限于工程实践的研究，对其腐蚀机理以及反应过程缺乏进一步深入的研究。

However, researching of the high temperature corrosion is limited in engineering, more in-depth researching is lack about the corrosion mechanism and the course of reaction.

20. 开发USC机组的关键 ，在于开发热强度高、耐高温腐蚀、耐汽侧氧化、技术上可行、经济上合理的新型钢材。

The key technique for development of USC units is to develop a new type of steel material with high thermal strength, resistance to high temperature corrosion and oxidation at steam side.

21. 适用环境：由于选用材料经过特殊的表面处理，可在强腐蚀环境下正常工作。在- 60度严寒或150度高温下正常工作。

Application environment: because of the special surface treatment, the material can be used in strong corrosive environment. In -60 degree or 150 degree of normal work under high temperature.WwW.wenTIYi.cOM

22. 司太立合金是一种能耐各种类型磨损和腐蚀以及高温氧化的硬质合金。

The stellite alloys are hard alloys which can resist various wear, corrosion and oxidation at high temperature.

23. 电缆具有较好的热稳定性，能在高温、低温、腐蚀性中保持良好的电性能和柔软性，适合。

The cable has good thermal stability, can maintain good electrical properties and flexibility in the high temperature, low temperature, corrosion.

24. 不要安装在高温，高湿度，灰尘，腐蚀性气体，振动及有电振等场所。否则可能引起产品误动作或火灾。

Do not install in areas subject to high temperature, high humidity, dust, corrosive gas, vibrations, shocks. To do so may result in malfunction or fire.

25. 流量控制器：对于高温，对腐蚀性介质，在特殊材料和特殊设计。

Flow controllers: for high temperatures, for aggressive media, in special materials and special designs.

26. 镍对酸碱有较高的耐腐蚀才能，在高温下有防锈和耐热才能。

Nickel has a high corrosion resistance to acid and alkali, rust and heat resistance at high temperature.

27. 镍对酸碱有较高的耐腐蚀才能，在高温下有防锈和耐热才能。

Nickel has a high corrosion resistance to acid and alkali, rust and heat resistance at high temperature.